Lost Vape Centaurus Sub Ohm V2 Clearomizer

Lost Vape presents the second version of its Centaurus Sub Ohm: a clearomizer with a 26mm diameter, designed for airy vape enthusiasts in DL.

The tank has a 5ml capacity and is filled through a handy sliding top cap. For the airflow, it is adjusted at the top with precision, enabling one to choose between an airy or slightly more tight draw.

Equipped with an 810 drip tip, this clearomizer also includes two UB Max coils for a powerful vape in direct inhaling. We recommend using e-liquids with a high rate in VG (>50%).

Lost Vape's Centaurus Sub Ohm V2 clearomizer with Vaperz Cloud's Ascent Lite mod

The design of the Centaurus Sub Ohm V2

Made of stainless steel and glass, Lost Vape has decided to keep the same design as the first version. The clearomizer measures 26mm in diameter at the base, and the bulb tank brings the width to 30mm for a capacity of 5ml. Note that you also have a second 3ml straight Pyrex glass tank available.

The total height, including the 810 drip tip, is 58.5mm, and it weighs 66g. With these dimensions, the Centaurus Sub Ohm V2 clearomizer can be adjusted to fit most mods available on the market.

The sliding top cap covers a large filling hole, while the airflow, also located at the top, can be adjusted precisely without any risk of leakage. Its 810 drip tip confirms its intention to be a direct inhaling clearomizer.

Lost Vape's Centaurus Sub Ohm V2 clearomizer

The UB Max coils

Compatible with UB Max coils, Lost Vape includes two in the box.

Upon receipt, you will receive:

• One 0.15ohm UB max coil: an airy draw between 80 and 120W
• One 0.3ohm UB max coil: a slightly less airy draw between 40 and 60W

For this sub-ohm clearomizer, we recommend using e-liquids with a VG (vegetable glycerin) content of >50%.

How do I install the Centaurus Sub Ohm V2 coil?

When you receive your clearomizer, you can choose to install the 0.15ohm or 0.3ohm UB Max coil.

Here are the steps to follow to install either one:

1. Unpack one of the two new coils included in the box
2. Soak the cotton with a few drops of e-liquid
3. Unscrew the base of the clearomizer
4. Insert the new coil in the designated compartment
5. Screw the bottom part of the clearomizer back on
6. Fill the tank with e-liquid

Caution: wait about ten minutes before vaping to allow the new coil to soak up the e-liquid properly.

The Centaurus Sub Ohm V2 airflow

Lost Vape has provided an airflow with two air intakes at the top of the tank, a handy system that prevents e-liquid leaks.

Its two air intakes, located on two opposite rows, that open or close by turning the airflow ring.

This simple and quick top airflow allows for precise and complete control of the draw; you can choose between a very airy vape or a slightly tighter one.

The air intakes of Lost Vape's Centaurus Sub Ohm V2 clearomizer

How to fill the tank of your Centaurus Sub Ohm V2?

With the Centaurus Sub Ohm V2 tank, you get a capacity of 5ml (or 3ml with the Pyrex included) and a filling system using a sliding top cap without unscrewing the clearomizer.

To open, simply turn the top cap a quarter turn to align it with the indicator, then push it.

Here is a step-by-step guide to filling your round tank:

1. Turn the top cap a quarter turn
2. Push it gently backwards
3. Insert the tip of your e-liquid bottle into the filling hole
4. Fill the tank
5. Return the top cap to its position, then turn it a quarter turn until it reaches the 'LOCK' mark
6. If the coil has just been installed, allow it to soak for 5 to 10 minutes before vaping

The filling of Lost Vape's Centaurus Sub Ohm V2 clearomizer

Box contents

• 1 5ml Centaurus Sub Ohm V2 clearomizer
• 1 0.15ohm UB Max X1 V2 coil
• 1 0.3ohm UB Max X3 V2 coil
• 1 spare tube 2ml Pyrex
• 1 set of spare pieces
• 1 user guide

Box contents of Lost Vape's Centaurus Sub Ohm V2 clearomizer