Fumytech GoTank Sub-Ohm Clearomizer

Specially designed for an airy draw in direct inhaling (DL), the GoTank Sub-Ohm is a high-performing clearomizer with a carefully crafted design.

Made to receive the FTC coils by Fumytech, it has a bulb tank of 5.5ml and a short 810 drip tip.

Its standard 510 pin enables you to connect it to all mods, by favouring a minimum power of 80W.

The GoTank Sub-Ohm clearomizer presents a diameter of 26.5mm base, for a 32mm width with its bulb Pyrex.

The GoTank Sub-Ohm clearomizer with the Dovpo X Vaping Bogan's Odin V2 DNA250C

A look that sets it apart

For its GoTank Sub-Ohm, Fumytech has opted for a robust stainless steel structure.

Measuring 55.6 mm high and weighing 90 g, it features a modern design with a rather solid look, accentuated by a round Pyrex glass.

This opulent appearance makes it ideal for your larger mods for an XL setup!

Fumytech's GoTank Sub-Ohm clearomizer

The FTC coils

The GoTank Sub-Ohm is clearly designed for cloud vaping, so what could be better than TFC coils to go with it!

These coils are exclusively designed for a very airy draw when inhaling directly (DTL), while offering optimal flavor rendering.

Upon receipt, your clearomizer is already equipped with a 0.2ohm TFC coil, allowing you to vape between 60 and 70W.

Once the coil is worn out, easily change it with a new one by following these steps:

1. Unscrew the bottom part of the clearomizer
2. Pull on the old coil to remove it from its housing
3. Soak a new coil with a few drops of e-liquid
4. Then insert it in place of the old one
5. Fill your tank with e-liquid
6. Wait a few minutes before vaping to allow your new coil to prime properly

A leakproof top airflow

Located on the top part of your clearomizer, the airflow ring enables you to adjust the airflow to your liking.

For a very cloudy vape, open the two windows fully by rotating this ring. Conversely, reduce the openings to make the most of a slightly more restricted draw, emphasizing the flavors.

This top airflow system also prevents any unwanted e-liquid leaks.

The airflow of Fumytech's GoTank Sub-Ohm clearomizer

A top-fill clearomizer for easy filling

Equipped with a bulb Pyrex and 5.5ml capacity, the GoTank Sub-Ohm offers a handy top filling system.

When it's time to refill your e-liquid, simply:

1. Turn the clearomizer's top cap a quarter turn to remove it
2. Insert the dropper into the filling hole
3. Gently pour the e-liquid into the tank until it is three-quarters full
4. Carefully replace the top cap

Remember to wait 5 to 10 minutes before vaping if you are using a new coil.

The filling of Fumytech's GoTank Sub-Ohm clearomizer

Box contents

• 1 5.5ml GoTank Sub-Ohm clearomizer
• 1 0.2ohm FTC coil (pre-installed)
• 1 bag of spare washers
• 1 user guide

The Go Tank Sub-Ohm clearomizer is made by Fumytech.

Box contents of Fumytech's GoTank Sub-Ohm clearomizer