Aspire Veynom LX Podmod

With its Veynom LX, Aspire is meant for enthusiasts of airy draw in direct inhaling (DL).

This podmod has the ASP chipset to deliver a maximum power of 100 watts.

It is equipped with a 3,200mAh built-in battery and a 0.96" TFT screen, giving access to numerous settings.

The Veynom LX also has a 5ml top-fill cartridge, thanks to a handy airflow system, directly accessible via the cartridge.

This sub-ohm electronic cigarette has a setting of air intakes thanks to a handy airflow system, accessible directly via the cartridge.

Aspire's Veynom LX podmod

A podmod with a tube format

The Veynom LX presents a tubular look with dimensions of 129.6x34.5x28mm, for a weight of 163g.

Its main side offers from top to bottom:

• A Fire button
• A 0.96" TFT screen
• Two setting buttons
• A USB-C port

Handling Aspire's Veynom LX podmod

Several operation modes of your choice

According to your needs, Aspire enables you to use your e-cigarette in different ways, thanks to multiple functioning modes:

• AUTO mode: the ASP chipset automatically adjusts the power according to the coil used in the cartridge
• WATT mode: manually set the power, from 1 to 100 watts
• VOLTAGE mode: manually set the output voltage, from 0.5 to 9 volts
• BYPASS mode: for an experience close to a mechanical mod, the electronic safeties
• CPS mode: save up to three power settings

The screen of Aspire's Veynom LX podmod

A 3,200mAh capacity

The Veynom LX podmod is equipped with a 3,200mAh built-in battery, rechargeable by USB-C.

The battery level of your kit is indicated as a percentage on the screen.

Get a USB-C cable in the box and connect it to the port located below the setting buttons.

The USB-C port of Aspire's Veynom LX podmod

The Veynom cartridge

The Veynom LX has a 5ml tank, magnetically connected to the podmod.

This cartridge is specially designed to receive the BP Coils for an airy draw in direct inhaling (DL).

Its base is rotative; it includes the system of air intake settings.

The cartridge of Aspire's Veynom LX podmod

Coils made for DL

Your Veynom LX is delivered with two BP Coils:

• 1 0.15ohm BP Mesh coil: to use between 60 and 80 watts, for a cloudy vape
• 1 0.3ohm BP Mesh coil: to use between 30 and 40 watts, for a slightly more restrictive vape

To install the coil in the tank, follow the steps below:

1. Take the cartridge off the base
2. Soak a new coil with some e-liquid drops
3. Turn the cartridge upside down
4. Insert the coil in its compartment
5. Reconnect the cartridge to the podmod
6. Wait for 5 to 10 minutes so the coil is correctly primed with e-liquid

An adjustable airflow

Aspire gives you a hand in the setting of air intakes, via a system directly included in the cartridge.

Turn the tank to easily alternate between an airy draw and a bit tighter vape.

The airflow of Aspire's Veynom LX podmod

A 5ml top-fill tank

Not only does the Veynom LX offer a 3,200mAh battery, but it also presents the advantage of having a great e-liquid capacity.

This tank with a 5ml capacity is easily filled from the top.

For this:

1. Take the top part of the cartridge (top cap)
2. Insert the bottle tip of your bottle into one of the two filling holes
3. Pour your e-liquid. Warning: don't pour anything into the central chimney
4. Replace the top cap
5. Wait for some minutes before vaping so the coil is correctly primed

Filling of Aspire's Veynom LX podmod

Box contents

• 1 3,200mAh Veynom LX podmod
• 1 5ml Veynom cartridge
• 1 0.15ohm BP Coil
• 1 0.3ohm BP Coil
• 1 USB-C cable
• 1 user guide

The Veynom LX is made by Aspire.

Box contents of Aspire's Veynom LX podmod