Aspire Pixo Neo Podmod

Master the Pixo Neo podmod in a few minutes! A&L guides you step by step for a quick and efficient handling.

Aspire is back with the Neo version of the Pixo podmod, whose simplicity, capacity, and performance are particularly suited to beginners.

The Pixo Neo podmod offers a maximum power of 30W and a capacity of 1,300mAh.

Aspire has made its equipment compatible with Pixo cartridges, which include a built-in coil.

Choose the tank that suits you and adjust this e-cigarette to your draw, whether it's indirect inhaling (MTL) or restrictive direct inhaling (RDL).

Its intuitive operation is suitable for both first-time vapers and experts looking for simplicity.

Aspire's Pixo Neo podmod

A graphic display with diverse animations

With its structure in aluminum alloy with compact dimensions of 110x16.2x30.4mm, the Pixo Neo enables good handling.

For its Neo version, the manufacturer bets on a 0.85" color screen, offering three animated themes.

Handling Aspire's Pixo Neo podmod

The magnetic base of Pixo Neo

Aspire includes a magnetic connection to your device so you can associate it with its Pixo cartridge.

This handy system makes it possible to turn your different tanks around if you want to alternate flavors.

The magnetic connection of Aspire's Pixo Neo podmod

The simplified functioning of the Pixo Neo podmod

With its Pixo Neo, Aspire simplifies vaping by only offering two functioning modes:

• SMART mode: automatic power adjustment between 5W and 30W
• WATT mode: manual power adjustment between 5W and 30W

To turn on or off the device, push five times on the FIRE button located on one of the sides.

Once turned on, press the same switch twice to browse the main menu options.

When your settings are adjusted to your preferences, hold down the FIRE switch to save them, then return to the main menu.

The color screen of Aspire's Pixo Nexo podmod

A built-in battery to your e-cigarette

The Pixo Neo podmod has a built-in battery with a 1,300mAh capacity.

Observe the level of charge in real time thanks to a luminous indicator, and a percentage displayed on the screen.

Use the USB-C cable included to recharge your Pixo Neo podmod when it has a low battery level.

Find the USB-C port below the electronic cigarette.

The USB-C port of Aspire's Pixo Neo podmod

The Pixo cartridge

Always know how much e-liquid you have left with the fully transparent Pixo cartridge.

Aspire includes two Pixo cartridges with sealed coils in your box, one of which is already pre-installed on your podmod.

A built-in coil

Offered in different coil values, choose the tank that best suits your draw:

• A Pixo 0.6ohm cartridge with sealed coil (pre-installed): to be used between 14W and 19W for indirect inhaling (MTL)
• A Pixo 0.4ohm cartridge with sealed coil (spare): to be used between 23W and 30W, and adjusted for semi-airy vaping (RDL)

After a few weeks of use, some signs of wear will appear (dry hit, burnt taste). It will then be time to change your cartridge for a new one, making sure to dispose of the old one in an appropriate container.

Aspire's Pixo cartridge

The lateral and adjustable airflow button

Because each vaper has its own draw, Aspire offers a setting button for air intakes.

Find it on one of the sides of your device and adjust it to your draw: for a tight vape, slide the switch down, and vice versa, for a slightly airier draw, position it at the top.

The airflow button of Aspire's Pixo Neo podmod

The lateral filling of the Pixo cartridge

Aspire equips the Pixo Neo with a 3ml capacity tank.

To proceed to the filling of your Pixo cartridge, follow the steps below:

1. Take the tank off its initial place
2. Open the silicon strip
3. Insert the bottle tip into the hole
4. Fill it with e-liquid
5. Close the silicon strip
6. Replace the cartridge on the magnetic base

Wait for some minutes before vaping so the coil is primed with e-liquid, especially as it is a new tank.

The filling of Aspire's Pixo cartridge

Box contents

• 1 Pixo Neo podmod
• 1 Pixo cartridge with 0.4ohm sealed coil
• 1 Pixo cartridge with 0.6ohm sealed coil (pre-installed)
• 1 USB-C cable
• 1 user guide

The Pixo Neo podmod is made by Aspire.

Box contents of Aspire's Pixo Neo podmod