Dotmod Dotpod S Pod
A fancy kit, ideal for beginners!
-
Maximum power18w
-
Volume2ml
-
Battery typeBuilt-in battery
-
Brand
Discover the DotPod S from Dotmod, the perfect e-cigarette that you can take anywhere! Watch this video of our panda expert to discover this incredible electronic cigarette!
After the success of its square-shaped Dotpod, the manufacturer Dotmod keeps riding the wave of elegant and intuitive pods. Whether you're a beginner or an expert, discover the Dotmod S, a stylish electronic cigarette as easy to use as it is effective!
If you recently started vaping or if you're looking for a mobile and refined vape, this kit will satisfy your cravings for indirect inhaling vaping (MTL), similar to the tight draw of a regular cigarette. Its 800mAh built-in battery can reach up to 18W and is fitted with a 2ml disposable cartridge. Fully preset, the Dotmod S has a major difference compared to its brother: its airflow system is adjustable!
Dotmod's Dotpod S pod
Fineness and elegance
Those two words perfectly describe the slender and refined lines of this beautiful electronic cigarette. Even though it looks a lot like its predecessor, the Dotmod S stands out by its elongated size of 25.5x107x14.5mm. Thanks to its leather coating, it offers perfect handling and can easily fit in all pockets and bags!
Adorned with the manufacturer's logo, the Dotmod S is fitted with a 2ml disposable cartridge and offers you great vaping sessions with an indirect inhale (MTL).
Handling Dotmod's Dotpod S pod
A pod ideal for beginners
Pods have the advantage of offering everything you need to vape easily and intuitively: a built-in battery and a cartridge. Your Dotpod S is comprised of an 800mAh built-in battery that allows you to vape all day long and a 2ml sealed-coil cartridge.
These two elements are connected by a magnetic system that allows you to clip and unclip the tank in the blink of an eye. This way, you can easily switch between flavors by using several cartridges! Feel free to get a pack of spare Dotpod cartridges on our website!
The magnetic connector of Dotmod's Dotpod S pod
An intuitive operation without any adjustment buttons
Fill up, clip, and vape! Dotmod makes your vaping experience easier thanks to this preset electronic cigarette, fully automatic and safe.
Dotmod's chipset takes care of everything: depending on the coil value of your cartridge, it automatically adjusts the power between 14 and 18 watts. Simply inhale through the drip tip to trigger the heating of the coil and enjoy the perfect sensations with an indirect inhale (MTL), similar to a regular cigarette.
4 LEDs for indicating the battery level
One of the sides of your pod mod is adorned with 4 LEDs that allow you to check the battery level in real time. Once you're about to run out of battery, use the included USB-C cable to charge your pod.
Plug the cable into the dedicated port (under the pod) and connect the other end to a laptop or a mains adaptor (not included).
The USB-C cable of Dotmod's Dotpod S pod
Two 2ml sealed-coil cartridges
To allow you to start vaping with your Dotpod S pod, Dotmod includes 2 sealed-coil cartridges in the box:
- One Dotpod cartridge with a 1.0Ω sealed coil (pre-installed)
- One Dotpod cartridge with a 0.8Ω sealed coil
These two disposable tanks have a capacity of 2ml, allowing you to vape for hours without needing to refill. As they are fitted with a fixed coil, you don't need to replace the coil; once the coil is worn out, replace the whole cartridge! You can refill it with e-liquid, however.
The 2ml cartridge from Dotmod's Dotpod S pod
Sealed coils
You can't have doubts about the Dotpod S; indeed, it operates exclusively with the sealed-coil Dotpod cartridges. These cartridges don't require coil changing and are as easy to use as they are intuitive. After two to three weeks of using your cartridge, the coil will start to wear out (you might notice a loss of flavor or a burnt taste). Simply replace the whole cartridge with a new one and don't bother switching the coil.
The box of your Dotpod S pod contains:
- One Dotpod cartridge with a 1.0Ω sealed coil (pre-installed): your pod automatically adjusts the power to 14W with an indirect inhale (MTL). This cartridge is especially suitable for e-liquids with high nicotine, nicotine salt, and CBD dosages
- One Dotpod cartridge with a 0.8Ω sealed coil: your pod automatically adjusts the power to 16W with a slightly airier draw, but still with an indirect inhale
Customize your airflow!
Above the LEDs on the side of your pod is a discreet, yet handy small button. Slide it downwards or upwards to enlarge or narrow the air intake and easily switch between a tight and a slightly airier draw.
You'll notice a small air intake right above the airflow adjustment tab; it is designed to provide your coil with the perfect airflow.
The airflow adjustment tab of Dotmod's Dotpod S pod
Clean and easy filling
Go for a relaxing vaping experience with this easy-to-use pod. As it is designed for an MTL draw with an indirect inhale, the Dotpod S doesn't consume a lot of e-liquid; enjoy a long-lasting 2ml tank!
Once you need to refill your cartridge, proceed as follows:
- Pull the cartridge to remove it from the pod's magnetic base
- Lift the silicone tab on the side of the tank
- Tilt the cartridge then insert the tip of your e-liquid bottle into the dedicated hole
- Pour e-liquid up to three quarters of the tank
- Close the silicone tab
- Put the cartridge back onto the pod's magnetic base
N.B: Remember to wait for 5-10 minutes before vaping if you use a new cartridge to make sure the coil is primed with e-liquid.
The side-fill system Dotmod's Dotpod S cartridge
Contents of the mod
- One Dotpod S pod
- One Dotpod 2ml cartridge with a 1.0Ω sealed coil (pre-installed)
- One Dotpod 2ml cartridge with a 0.8Ω sealed coil
- One USB-C cable
- One user guide
The Dotpod S pod is manufactured by Dotmod.
Contents of the box of Dotmod's Dotpod S pod
Maximum power | 18w |
---|---|
Volume | 2ml |
Battery type | Built-in battery |
Height | 107mm |
Material | Zinc alloy and faux leather |
Width | 25.5mm |
Depth | 14.5mm |
Mod type | Podmod |
Mod type | Electronic |
USB charging | Yes |
Chipset version | DotMod |
Fill type | From the side |
Drip-tip | Proprietary |
Connector pin | Proprietary |
Configuration | None |
Your comment cannot be sent
feedback Report a comment
Abuse report sent
Your report cannot be sent