Dotmod Dotstick Revo Pod Mod

The DotStick kit by Dotmod, a beautiful innovation in retro kit

The Dotstick Revo 35W pod is a dream. Everything about it is conducive to pleasure, its practical format, its unique look, its intuitive operation...

In addition to all this, but also to its ingenious 3.5ml capacity PCTG cartridge, this kit has the surprise of the year in store for you, an integrated battery that is more powerful, secure, and long-lasting, with a supercapacitor!

Coupled with the Dotstick Revo charger (sold separately), this is an electronic cigarette that knows what real speed is, it will recharge in less than 5 minutes!

The reshuffle Dotmod elegance

With its Dotstick Revo kit, Dotmod is clearly part of the pod mod universe. The size is mini and the format is quite tubular, with 109mm height and 21mm diameter in total.

We still remain in this Dotmod elegance. But here, the refinement is even more modern and advanced than in the previous equipment of the brand. The Dotstick Revo revisits the very notion of sobriety with its small logos and its beautiful signatures machined on its colored body, with a magnificent transparent coating!

The DotStick Revo pod by Dotmod

A pod with the most beautiful technical trumps

The Dotstick Revo pod by Dotmod doesn't only have a completely new look. It's also getting a makeover on the inside! From its integrated supercapacitor battery to its particularly intuitive operation, this kit proves to be more than a pleasant company...

Whether you're a beginner or a more experienced smoker, this is the electronic cigarette to adopt without hesitation!

The magnetic connector of the DotStick Revo pod by Dotmod

A working more than intuitive, genius!

The Dotstick Revo pod is the epitome of ease of use, yet the most versatile of all.

There is no screen or control knob here. Apart from the switch (or fire) button that allows you to switch on the vape, you won't have to worry about anything. The electronic protections are all there, the vaping modes are simplified...

The Dotstick Revo pod can :

• accommodate any DotCoil coil over 0.28 ohm;
• navigate between 5 and 35 watts of maximum power;
• adjust its power according to three pre-set power levels: High (green LED), Medium (blue LED), and Low (red LED). To do this, press the switch button three times in succession
• switch to Bypass mode, but only with 1.2 to 2.2 ohm coils.

A revolutionary integrated battery with a supercapacitor!

Rather than a standard built-in battery with limited performance, the Dotstick Revo pod chooses a supercapacitor. The benefits are incredible:

• Optimized charging time
• Increased power
• Enhanced safety
• Increased life span

Thus, if this supercapacitor reveals a 700mAh autonomy, its performances remain incomparable, compared to those of a traditional battery. In other words, your equipment is more efficient, more reliable, and more durable!

As with all battery-powered devices, the Dotstick Revo pod is equipped with a USB Type C connector for recharging.

Note that the Dotstick Revo charger (sold separately) will recharge your device in less than 5 minutes!

The recharging USB-C port of the DotStick Revo pod by Dotmod

To monitor the charging status of your electronic cigarette, you will also rely on the LED system surrounding the fire button:

• Green LED: battery at more than 61%.
• Blue LED: battery at 21-60%.
• Red LED: battery at 1-59%.

How does the cartridge of the Dotstick Revo pod?

As a pod mod, the Dotstick Revo uses both a built-in battery and a reusable cartridge.

Made of PCTG, this cartridge has a nice volume of 3.5ml, with a side filling system. At the end of the cartridge, you will find a specific drip tip (not universal), specially designed to optimize your sensations in MTL and RDL. Inside, it will host the manufacturer's DotCoils coils (caution: not the 0.15 ohm).

The 3.5ml cartridge of the DotStick Revo pod by Dotmod

Enjoy performances of DotCoil by Dotmod!

The DotStick Revo pod by Dotmod will host only one type of coil, the famous DotCoils from Dotmod (except the 0.15Ω).

Not only does Dotmod already equip your cartridge with a resistor, but it also delivers a second one in the box:

• DotCoil 0.7 ohm (pre-installed): recommended use from 14 to 20 watts.

-> 16W at Low level (red LED), 18W at Medium level (blue LED), 20W at High level (green LED)

• DotCoil 0.9 ohm: recommended use between 10 and 15 watts.

-> approx. 12W at Low level (red LED), 14W at Medium level (blue LED), 16W at High level (green LED)

With these DotCoils from 0.3 to 0.9 ohm, this kit is able to provide you with an authentic vape in indirect inhale (MTL) or restrictive direct inhale (RDL)!

To place your coil, you will have to remove the cartridge from its magnetic base, turn it over, and then remove the used coil to replace it with a new one, previously soaked with a few drops of e-liquid on its visible cotton parts.

Slide to adjust your airflow!

The airflow adjustment system on the Dotstick Revo pod is reminiscent of a famous kit...

On the beautiful body of your podmod, you will see a curious sliding mechanism with a small handle. It's this mechanism that will allow you to influence the draw of your electronic cigarette.

• Push to the right and you open the air intake window
• Push to the left and you block or even completely close the air intake window

The airflow system of the DotStick Revo pod by Dotmod

Easily fill your 3.5ml tank, from the side!

The Dotstick Revo cartridge, which is the part to be magnetized on the pod and which serves as a tank, is made of a very resistant material, PCTG. In addition to being robust, this tank allows good autonomy in e-liquid, it's up to 3.5ml so it will be possible to embark everywhere, with you!

To refill this tank:

1. Remove the cartridge from the pod's magnetic base
2. Pull the tab on the bottom of the cartridge
3. Tilt the cartridge slightly to avoid any leakage of e-liquid
4. Insert the tip of your bottle in the opening and fill
5. Close the filler door by replacing the tab
6. Reclip the cartridge on your pod

N.B:  It's advisable to never fill your tank to the brim. It's also advisable to wait a few minutes before vaping, to ensure that your coil is properly primed.

The lateral filing on the DotStick Revo pod by Dotmod

Box contents of the Dotstick Revo pod

• A Dotstick Revo integrated battery
• A Dotstick Revo cartridge
• A second spare drip-tip
• A Dotcoil 0.7Ω (pre-installed)
• A Dotcoil 0.9Ω (pre-installed)
• A recharging USB-C cable
• Dotmod stickers
• A user guide

The Dotstick Revo pod is made by Dotmod.

The box contents of the Dotstick Revo pod by Dotmod