Dotmod DotPod Max Podmod

Design, modern, and efficient, discover the DotPod Max podmod by Dotmod in this unboxing video by A&L.

Dotmod presents equipment meant for vape beginners and experts.

With a 2,100mAh built-in battery rechargeable by USB-C, the DotPod Max delivers a maximum power of 60W.

Your podmod is delivered with two types of cartridges (with sealed or removable coil), each with a top-filling 5ml tank.

If you choose the empty cartridge, you'll have to add a DotCoil coil from the manufacturer (included).

Dotmod's DotPod Max podmod

A rectangular shape

The DotPod Max presents a structure in anodized aluminum giving it a high-quality conception.

Its clean lines and rectangular dimensions (92.3x43.1x20mm) make this electronic cigarette both compact and stylish.

The cartridge is housed entirely within the body of the podmod, leaving only the 510 drip tip protruding. However, you'll have access to the remaining e-liquid level thanks to the two side clearances and the transparent PCTG design of the tank.

The main front panel of your DotPod Max features:

• 1 Fire button
• 1 0.69" OLED screen

Handling of Dotmod's DotPod Max podmod

A unique setting mode: vari-wattage

Through the Fire button and the 0.69" screen, you'll have to manually set the power up to 60 watts by pushing on it three times.

The power setting is made according to the value of the coil used.

You'll have the possibility to lock your DotPod Max by pushing the button 4 times.

To unlock it: 1 clic, then 4 successive clics.

The screen of Dotmod's DotPod Max podmod

A 2,100mAh built-in battery

With its DotPod Max, the manufacturer ensures a great use capacity thanks to a 2,100mAh built-in battery.

When you need to refill it with energy, take the USB-C cable included and connect it to the port located below the podmod.

The USB-C port of Dotmod's DotPod Max podmod

A cartridge of your choice: with a sealed or removable coil

Dotmod delivers the DotPod Max with two types of cartridges, each offering a 5ml tank:

• An empty cartridge compatible with the DotCoil coils: delivered with a 0.3ohm coil, to use between 25 and 40W for a slightly airy draw in restrictive direct inhaling (RDL)
• A cartridge with a 0.6ohm sealed coil, to use between 20 and 24W for a tight vape in indirect inhaling (MTL)

These two cartridges are easily inserted into the podmod thanks to a system of magnetic connection.

Have you opted for the fixed coil cartridge? Once worn out (loss of taste, slightly burnt taste), discard the entire cartridge and change it for a new one.

You've chosen a cartridge with removable coils and the coil is showing signs of wear? Don't throw the cartridge away!

Get yourself a new DotCoil coil, then :

• Remove the cartridge from its base
• Pull out the worn-out coil to remove it
• Soak a new coil in a few drops of e-liquid
• Insert it in place of the old one
• Put the cartridge back on its base.
• Fill up with e-liquid
• Wait 5 to 10 minutes before vaping, to allow the new coil to prime properly

The cartridge with sealed coils of Dotmod's DotPod Max podmod

An adjustable airflow

Dotmod allows you to adjust the air intake thanks to a wheel located under the cartridge.

Alternate between a restrictive draw and a bit more airy vape by freeing more or less the hole.

The airflow of the cartridge of Dotmod's DotPod Max podmod

How to fill your tank?

Not only do the DotPod Max cartridges have a big capacity in e-liquid but they also present a top filling system, being top filling.

So when the time comes to refill your e-liquid tank, there's no need to remove the cartridge from its base.

Simply take your dropper bottle and :

1. Slide out the small drawer at the top of the cartridge
2. Insert the tip of your bottle into the filling hole
3. Pour in your e-liquid
4. Close the drawer

Remember to wait a few minutes before vaping if you're using a new coil, to give it time to prime properly with e-liquid.

Filling of the cartridge of Dotmod's DotPod Max podmod

Box contents

• 1 2,100mAh DotPod Max podmod
• 1 DotPod Max empty cartridge (pre-installed)
• 1 0.3ohm DotCoil coil (pre-build)
• 1 cartridge with a 0.6ohm sealed coil
• 1 USB-C cable
• 1 user guide

The DotPod Max podmod is made by Dotmod.

Box contents of Dotmod's DotPod Max podmod