Aegis Solo 2 S100 Discovery Pack

By choosing the Aegis Solo 2 S100 Discovery pack, you'll enjoy not only a great offer but also you'll have the pleasure of using your nice kit immediately after receiving it. Arômes et Liquides has selected a pack with an Aegis Solo 2 S100 kit of Geek Vape, 2 18650 VTC 6 batteries of Sony, and an MC1 battery charger of Xtar.

IP68 certified, the famous Aegis Solo 2 S100 kit is resistant to dust, water, and shocks, and works with an 18650 single battery. Delivering a maximum power of 100W, it takes the legendary Z Sub Ohm 2021 clearomizer, with a 5.5ml capacity, and is particularly made for airy draw in direct inhaling (DL); in other words for big clouds chasing!

The Aegis Solo 2 S100 discovery pack

An IP68 certification for a finished look

This carefully designed mod features a zinc-alloy architecture with a metallic finish and is adorned with a magnificent coat of leather on the rounded front.

But that's not all! This elegant structure actually conceals real armor against shocks, splashes, and dust (IP68 certification).

The Aegis Solo 2 S100 kit by Geek Vape

Functioning

Equipped with Geek Vape's high-performance chipset, the Aegis Solo 2 S100 mod features a whole army of protections against overvoltage, polarity reversal when inserting the battery, and dry hits (e-liquid leakage).

Its 1.08" TFT screen gives you access to the various settings, and allows you to select as required:

• Power mode (Vari-Wattage): manually adjust power, from 5 to 100W
• VPC: create power curves for optimized puffs

The Aegis Solo 2 S100 mod also features a TC (Temperature) mode, to be selected if you swap the Z Sub Ohm clearomizer for a rebuildable atomizer. You'll then adjust the temperature according to the type of resistive wire used.

Geek Vape has cleverly equipped this electronic mod with an "A-Lock" button on the side of the mod, enabling it to be locked quickly and easily to prevent accidental pressing.

The TFT 1.08" screen of Aegis Solo 2 S100 by Geek Vape

A single 18650 battery supply is included!

Not only the Aegis Solo 2 S100 kit is resistant to shocks, but it also has a nice vape autonomy! This endurance is possible thanks to its supply system in a single 18650 battery

To insert your 18650 battery, unscrew the protection cap under the mod to free the trapdoor. Don't forget to check the polarities when you put it in.

In this pack, Arômes et Liquides decided to slip not one but two 18650 VTC6 batteries by Sony, allowing you to use your kit while one of the batteries is charging!

The single battery placement of the Aegis Solo 2 S100 kit by Geek Vape

A battery charger is included in this pack!

Even though the Aegis Solo 2 S100 kit has a USB-C port (cable not included), we recommend using an external charger as much as possible.

That's why Arômes et Liquides completes this pack with an MC1 charger by Xtar, allowing you to completely charge your battery!

The MC1 charger by Xtar of the Aegis Solo 2 S100 discovery pack

The Z Sub Ohm clearomizer

Geek Vape gives the Aegis Solo 2 S100 kit a legendary 2021 Z Sub Ohm clearomizer.

With a 24mm diameter, it has a bulb Pyrex with a generous capacity of 5.5ml and an 810 drip-tip for cloudy vape sessions!

The Z Sub Ohm 2021 clearomizer of the Aegis Solo 2 S100 kit of Geek Vape

Compatible with Z Series coils

Your Aegis Solo 2 S100 kit is delivered with two Z Series coils, meant for an airy draw in direct inhaling (DL). Whether it is with the Z 0.20Ω (pre-installed) or with the Z 0.25Ω, you'll go for nice vape sessions both tasty and cloudy.

Compatible with all the Z Series coils collection, you'll use the two coils included with the following powers:

• Z 0.25Ω coil: to use between 45 and 75 watts
• Z 0.20Ω coil (pre-installed): to use between 70 and 80W

After two to three weeks of use, your coil will start to show some signs of wear (flavor loss or light burnt taste); it is time to change for a new one.

For this:

1. Take the clearomizer out of the mod
2. Unscrew the low part
3. Pull the used coil (don't hesitate to help yourself with the included key)
4. Soak a new coil of some drops of e-liquid
5. Insert it in the same place as the old one
6. Screw back the clearomizer base
7. Fill it with e-liquid
8. Wait 5 to 10 minutes before vaping it, so that the new coil is correctly soaked in e-liquid

A leakproof top airflow

Located on the top of the clearomizer, the airflow is adjusted thanks to a knob that you can turn as you wish, to free up the airflow orifice to a greater or lesser extent.

So you can easily alternate between a very airy inhaling and a slightly tighter draw, depending on the type of vape you want.

With its Z Sub Ohm, Geek Vape relies on a leak-proof system, thanks to its clever position at the top of the clearomizer.

The top airflow of the Geek Vape's Z Sub Ohm clearomizer

A tank of 5.5ml, rechargeable by the top

Thanks to its 5.5ml rounded Pyrex, the Z Sub Ohm in the Aegis SOlo 2 S100 kit offers a long e-liquid life.

But that's not all! Geek Vape has also equipped it with a top-fill system, giving you quick and easy access to the filling port. Once the top cap has been unscrewed, simply insert the tip of your bottle into one of the two wide slots, and proceed to refill your tank with e-liquid.

The filling holes of the Geek Vape's Z Sub Ohm

The Xtar MC1 charger

Included in the Aegis Solo 2 S100 starter pack, the Xtar MC1 will be your most faithful ally when it comes to topping up your battery!

Practical and space-saving, you can slide your Sony 18650 VTC6 rechargeable battery (supplied) as required, but ensure that the positive and negative poles are inserted correctly.

Its compact dimensions (92x22x25mm) make it discreet and, above all, easy to transport.

Simply plug in the micro-USB cable (included) and connect to an external power source (USB).

MC1 Xtar charger features

• A single-battery charger
• An LED charge indicator
• An operating temperature: 0 - 40°C
• Recharging current intensity: 1A
• Battery types: Li-On / IMR
• Compatible with: 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 20700, 21700, 26650

2 Sony 18650 VTC6 3000mAh 20A batteries included in the pack

Ready to use, the Aegis Solo 2 S100 pack contains everything you need for efficient, worry-free vaping! So, to complement Geek Vape's magnificent Aegis Solo 2 S100 kit, you'll find not only Star's MC1 battery charger, but also not one, but two Sony 18650 VTC6 3000mAh 20A batteries.

Compatible with your kit, this battery offers great vape autonomy, thanks to its 3000mAh. This set of two will enable you to enjoy your electronic cigarette without interruption: use one of the two batteries while the other replenishes energy on the MC1 charger.

Characteristics of the Sony VTC6 3000mAh 20A battery

• Weight: 48g
• Dimensions: 18x65mm
• Chemistry: INR Lithium-Ion
• Capacity: 3000mAh
• Maximum continuous discharge rate: 20A
• Maximum pulse discharge rate: 30A
• Minimum voltage: 2V
• Maximum voltage: 4.25V

Please observe all safety rules, both when using the battery and when transporting or storing it:

• Keep away from sources of heat
• Do not use if damaged (use a wrap to repair)
• Make sure the battery is inserted into the box or external charger with the positive and negative poles aligned.
• Always use an external charger rather than recharging via your kit's USB port
• Always use a protective case when transporting or storing your battery pack

The two Sony VT6 3000mAh 20A batteries of the Aegis Solo 2 S100 discovery pack

Contents of the pack

• 1 Aegis Solo 2 mod
• 1 Z Sub Ohm 2021 clearomizer
• 1 spare 5.5ml Bulb Pyrex
• 1 0.2ohm Z Series coil (pre-installed)
• 1 0.25ohm A series coil
• 2 Sony VTC6 3000mAh 20A batteries
• 1 Xtar MC1 charger
• 1 coil key
• 1 set of spare parts
• 1 USB-C cable
• 1 user guide

The Aegis Solo 2 S100 discovery pack is offered by Arômes et Liquides (A&L).

Contents of the Aegis Solo 2 S100 discovery pack by Arômes et Liquides