Justfog Minifit Cartridge (x3)
Set of 3 Minifit disposable tanks, 1.5ml capacity, 1.6Ω coil
-
Volume1.5ml
-
TankPolycarbonate (PC)
-
Tank SizeLess than 2ml
-
Brand
Because the Minifit pod by Justfog functions with the help of "disposable" cartridges, you'll need of this set of 3 Minifit spare cartridges!
Identical to the one already delivered with your electronic cigarette, these 1.5ml polycarbonate (PC) cartridges all have a fixed, non-changeable resistance of 1.6 ohm. Perfect for simple and effective vaping, in indirect inhalation (MTL)!
A beautiful set of 3 disposable cartridges for Minifit pod
Dedicated to Minifit pod by Justfog, the Minifit cartridges help vape along!
Made of very solid polycarbonate material, these tanks are particularly solids. Made of only one piece, you have nothing to change. Their buccal tip to vape, their coils, their air inlet, all are already there to ensure a vape unconstrained!
The Minifit cartridge for Minifit pod by Jusfog
1.6Ω coil already in the tank!
What is THE particularity of the Minifit cartridge? Its disposable working with a sealed coil.
Already installed in the tank, you'll find a performant coil with a 1.6 ohm value. It procures a well-throat hit, and tight feelings like a traditional cigarette while ensuring a perfect aroma and a nice cloud production.
Notice that with the coil, you have the possibility to use different e-liquids with high nicotine rates, nicotine salts, or CBD.
N.B: Yet, favor e-liquids with a high PG ratio, so composed of more than 50% of propylene glycol (avoids leaks).
A beautiful fixed-air inlet with three orifices
On the Minifit pod by Justfog, the airflow isn't adjustable. It's perfectly adjusted, assured by beautiful three orifices.
If the vape is rather tight, oriented indirect inhalation (MTL), however, these airflow assure a beautiful vapor production, you'll see!
The airflow of the Minifit cartridge by Justfog
Filling: from the bottom!
Despite the nice 1.5ml capacity of the Minifit cartridge, there will be a time when you will have to fill it with e-liquid to be able to continue vaping!
To recharge your Minifit cartridge, some handling is enough:
- Push the installed cartridge back and forth to remove it from its slot
- Return-it, upside down
- Lift the black flap protecting the access to the filling orifices
- Insert the tip of your bottle into one of the two orifices
- Fill it (never to the brim)
- Wait about 10 minutes for a perfect initiation of the coil
Filling the Minifit cartridge by Justfog
How to install the Minifit cartridge?
Like many cartridges, the 1.5ml Minifit presents a well-particular lead, only adapted to the Minifit pod by Justfog.
Either on the bottom of the cartridge or on the top of the integrated Minifit battery, you will find a magnetic system to connect these two nice parts.
So, to set up your Minifit cartridge and continue your Minifit pod smoking session, follow these steps:
- Firstly remove the clear silicone cap from the Minifit cartridge. It only serves to protect the connectors and the mouthpiece
- Place the cartridge in the slot provided, so on the magnetic base of the Minifit pod. It's impossible to go the wrong way!
- Turn on the device (4 consecutive clicks)
The Minifit cartridge installation on Minifit pod by Justfog
The set of 3 Minifit cartridges is made by Justfog. It's only sold in a pack of 3.
Volume | 1.5ml |
---|---|
Tank | Polycarbonate (PC) |
Fill type | From below |
Drip-tip | Proprietary |
Connector pin | Proprietary |