Dovpo & Vaping Bogan Blotto V1.5 RTA Atomizer
A rebuildable of 26mm, with a 6.4ml tank and a single/dual coil deck
-
Size44.5 X 26 mm
-
Diameter26mm
-
Coil buildSingle and Dual-coil
-
Brand
The Blotto V1.5 RTA atomizer by Dovpo and Vaping Bogan is a true maximizer of flavor and vapor. It’s a testimony to the talent of these two designers.
With its modern look, 26mm diameter, and adaptable tank (up to 6.4ml), this rebuildable atomizer performs equally well with single or dual coil builds. More than that, the Blotto V1.5 RTA is very easy to use, handle and maintain.
The best thing about it is that it fits perfectly on any type of electronic mod, as long as it has a 510 connector and a minimum diameter of 26mm!
Dovpo’s Blotto V1.5 RTA atomiser with Vaporesso’s Luxe II mod
A beautiful Blotto design
The Blotto V1.5 RTA atomizer by Dovpo and Vaping Bogan is inspired by the original Blotto designs while optimizing some of its aspects.
First of all, the Blotto V1.5 has a reduced height but a wider diameter. It’s now 44.5mm high and 26mm wide, becoming more squat. This does not prevent it from keeping its good compatibility with most of the market’s mods!
On the design side, the details are slightly reworked, but the 'skull' style is still in evidence. We would not want to change such a beautiful trademark!
Dovpo and Vaping Bogan’s Blotto V1.5 RTA atomizer
A redesigned single or dual-coil deck
The second change of the 1.5 version of the Blotto RTA lies in its deck. Although it is still possible to install single or dual coil builds, it is now much easier and more convenient to set them up!
On this beautiful deck, you will find four posts facing each other, two wells for putting the ends of your coils in, and massive vents in the middle.
This ingenious setup ensures two things: an optimal flavor rendition and thick vapor.
The deck of Dovpo’s Blotto V1.5 RTA atomizer
An airflow ring built for vapor
Like its predecessor or the Max version, the Blotto V1.5 RTA atomizer has a nice airflow ring on its 510 base. Just turn it from right to left to precisely adjust your airflow.
On the latter, multiple airflow holes allow for fine-tuning, resulting in either a purely direct inhale (DTL), or a more restrictive direct inhale (RDL). That and its 810 drip tip are the guarantee of an unforgettable vaping session!
The air intakes of Dovpo’s Blotto V1.5 RTA atomizer
A selection of top-fill tanks
The biggest asset of the Blotto V1.5 atomizer is its beautiful selection of tanks!
You can choose its capacity and material:
- One pre-installed straight Pyrex tank of 3.5ml
- One bubble-shaped Pyrex tank of 6.4ml
- One bubble-shaped PCTG tank of 6.4ml
Dovpo’s Blotto V1.5 RTA atomizer and its spare 6.4ml tanks
It doesn't matter which tank you equip your Blotto V1.5 RTA with. They are all filled in the same way, from above.
To do so, you must first unscrew the atomizer’s top cap. Then, insert the tip of your e-liquid bottle into one of the two filling holes. Finally, close the atomizer up and wait a few minutes for the coil to soak up enough e-liquid.
Filling Dovpo’s Blotto V1.5 RTA atomizer
Contents
- The Blotto V1.5 RTA atomizer
- A spare bubble-shaped Pyrex tank of 6.4ml
- A spare bubble-shaped PCTG tank of 6.4ml
- A multi-purpose skull tool
- A multi-purpose screwdriver
- A set of spare screws and O-rings
- A user guide
The Blotto V1.5 RTA atomizer is manufactured by Dovpo, in collaboration with Vaping Bogan.
The contents of Dovpo’s Blotto V1.5 RTA atomizer kit
Size | 44.5 X 26 mm |
---|---|
Diameter | 26mm |
Coil build | Single and Dual-coil |
Volume | 3.5 or 6.4ml |
Atomizer type | Bottom-coil |
Weight | 67.3g |
Tank | Pyrex or PCTG |
Fill type | From above |
Drip-tip | 810 |
Connector pin | 510 |