E-Phoenix The Hurricane 1.4 NG Atomizer

If you're looking for an atomizer in tight vape (MTL) or a bit airier (RDL), you'll have to opt for high-end equipment, like the Hurricane 1.4 NG atomizer of the Swiss modder E-Phoenix!

High-end atomizer in a 24mm diameter, it has a refined single coil deck, airflow enabling a meticulous setting thanks to its system of airflow inserts or its e-liquid control mechanism.

E-Phoenix's The Hurricane 1.4 NG atomizer with Dicodes' Pro Eighty mod

A high-end atomizer of Swiss quality

Made from 316L stainless steel and PMMA (tank and 510 drip tip) with PEEK insulation and 510 connector in 18-carat gold-plated brass, the Hurricane 1.4 NG atomizer is an example of Swiss quality.

This small 24mm-diameter, 35mm-high atomizer (without drip-tip) is a guarantee of quality and durability.

E-Phoenix's The Hurricane 1.4 NG atomizer

Easily build your coil, adjust the result with your airflow pin!

To access the deck: pull on the top of the atomizer (from the tank) to separate it from the base including the airflow ring.

This reveals a spacious single-coil building deck. Side by side, the two posts with flat screws will secure the coil. No wells here, but a simple, wide tank that guarantees easy coiling and an excellent supply of e-liquid.

In the center, a dedicated compartment for an airflow pin. Already installed, you'll find the 2.5mm - the most open diameter. In your box, you'll find a 0.8mm as well as a 1.2mm to further reduce your draw!

The deck of E-Phoenix's The Hurricane 1.4 NG atomizer

A customizable draw, in MTL like in RDL!

The bottom part of The Hurricane 1.4 NG atomizer is focused on one thing: the draw settings.

See this notched ring, with 10 holes of different diameters? That's your air intake wheel. It's there to help you manage and adjust your airflow.

There are two ways to do this: play with pairs, leaving two holes of the same diameter open, or opt for a single hole for an even tighter draw.

The air intakes of E-Phoenix's The Hurricane 1.4 NG atomizer

Fill your PMMA tank up to 3ml!

Equipped with a straight tank of PMMA material, your Hurricane 1.4 NG can hold up to 3ml of e-liquid.

The atomizer is filled from the top. Remove the top cap using the small machined notches, insert the tip of your bottle into one of the two visible windows, and fill your tank.

Note that a system for opening and closing the e-liquid inlets is visible on this part.

Filling of E-Phoenix's The Hurricane 1.4 NG atomizer

Box contents of The Hurricane 1.4 NG atomizer

• 1 The Hurricane 1.4 NG Atomizer
• 2 airflow inserts - 0.8mm, 1.2mm
• 1 disassembly key
• 1 set of spare O-rings
• 1 user guide

The Hurricane 1.4 NG atomizer is made in Swiss by E-Phoenix.

Box contents of E-Phoenix's The Hurricane 1.4 NG atomizer