Thunder Cloud X Coilturd AN RTA Atomizer

For experienced vapers and fans of rebuildables, the manufacturer Thunder Cloud and modder Coilturd have teamed up to present the AN RTA: a 25mm diameter atomizer featuring a postless deck capable of accommodating single or dual coil setups.

Designed for use in RDL or DL modes, it comes with two interchangeable airflow rings that let you adjust the draw to your preferences.

Additionally, its straight Pyrex tank is expandable from 3.5 to 4.5ml thanks to an extended chimney included in the box.

Furthermore, the original 810 drip tip can be replaced with a 510 drip tip using the included adapter and base.

Thunder Cloud X Coilturd's AN RTA atomizer with Thunder Cloud X Infinite Modz's Meca Hyperion V2 mod

A sturdy and precise design

Made entirely of stainless steel, the AN RTA measures 39.5mm in height and 25mm in width (excluding the drip tip and with the pre-installed 3.5ml tank).

If you decide to install the included extended chimney and the second straight Pyrex tube provided, its height increases to 42.5mm for a capacity of 4.5ml.

In terms of finishes, by opting for a limited edition, you receive the atomizer with engravings on the base and top of the atomizer.

Thunder Cloud X Coilturd's AN RTA atomizer

A postless single or dual coil deck

To access the AN RTA atomizer’s build deck, simply unscrew the atomizer’s base. The deck is a postless design with four terminals and a slightly curved surface for installing your coils.

In fact, on this deck, you can build either a single-coil or dual-coil setup.

For your convenience, the brand includes two 0.35ohm 3-Core Clapton Ni80 coils in your kit, so you can set up your first build right away.

The deck of Thunder Cloud X Coilturd's AN RTA atomizer

Would you like to set it up as a single-coil pickup? You have a chamber reducer that can be mounted directly on the top plate.

The chamber reducer of Thunder Cloud X Coilturd's AN RTA atomizer

Two airflow rings

To adjust the draw to your preferences, Thunder Cloud and Coilturd provide two separate airflow rings.

You will receive:

• A honeycomb ring (pre-installed): featuring 14 holes arranged in two rows on each side of the atomizer, suitable for RDL-style draw
• A ring with 3 large holes on each side: specially designed for a more open DL draw

The two airflow rings of Thunder Cloud X Coilturd's AN RTA atomizer

An expandable, top-fill tank

The AN RTA comes with a 3.5ml straight Pyrex tank, fitted with a short chimney, and a 4.5ml straight Pyrex tank with a chimney extension.

Filling is done from the top via top-filling.

So, when it’s time to refill with e-liquid, simply:

1. Rotate the top cap a quarter turn
2. Insert the tip of your bottle into the filling port
3. Pour in your e-liquid
4. Close the top cap by rotating it a quarter turn

The filling system of Thunder Cloud X Coilturd's AN RTA atomizer

Box contents

• 1 An RTA atomizer by Thunder Cloud and Coilturd
• 1 3.5ml Pyrex tank (pre-installed)
• 1 4.5ml Pyrex tank
• 1 short chimney (pre-installed)
• 1 extended chimney
• 2 airflow rings
• 1 chamber reducer
• 1 510 stand
• 1 510 drip tip adapter
• 2 0.35ohm triple-Core Fused Clapton coils
• 1 flat screwdriver
• 1 coil trimmer
• 1 Allen key
• 1 spare seal and screw kit
• 1 user guide

The AN RTA atomizer is made by Thunder Cloud in collaboration with Coilturd.

Box contents of Thunder Cloud X Coilturd's AN RTA atomizer