Yachtvape x Mike Vapes Eclipse Dual RTA Atomizer
The Eclipse RTA in its Dual version: dual-coil, 25mm, 4 or 6ml tanks
-
Diameter25mm
-
Coil buildDual-coil
-
Volume4 or 6ml
-
Brand
Check out the beautiful Eclipse Dual RTA atomizer from Yachtvape, made in collaboration with the reviewer Mike Vapes!
If the Eclipse atomizer has already caught your eye but you've been waiting for a cloudier, dual-coil version, try the Eclipse Dual RTA!
This beautiful 25mm rebuildable atomizer is not only wider, but it can also hold more e-liquid (either 4 or 6ml). It promises an airier vaping session with a direct (DTL) or restrictive direct inhale (RDL).
And, like its predecessor, you will benefit from the expertise of the YouTuber Mike Vapes, who actively contributed to its design!
The Eclipse Dual RTA atomizer with Dovpo’s MVV II mod
The Eclipse design, but now bigger!
Apart from its size and technical specifications, it is impossible to tell the difference between the Eclipse RTA atomizer and the Eclipse Dual RTA atomizer. The latter has exactly the same design as the first one, which is so dear to its fans.
The only difference is the size. While the Eclipse RTA was only 24mm wide and 37mm high, the Eclipse Dual RTA is 25mm wide and 49.5mm high.
The Eclipse Dual RTA is equipped with an 810 drip-tip as standard. You can use a 510 drip tip if you equip the adapter included in the kit.
Know that the gold-plated 510 pin is compatible with mechanical mods as well.
Yachtvape and Mike Vapes’ Eclipse Dual RTA Atomizer
A postless deck, now with a dual-coil setup!
Many vapers enjoy the precise flavors produced by the Eclipse RTA atomizer, which is the single-coil version, as you know. However, many vapers also wanted a dual-coil version, more suited to cloud-chasing. They can now enjoy this experience with the Eclipse Dual RTA atomizer!
By unscrewing the Pyrex tank, you can access the wide postless dual-coil deck.
To get started on your rebuildable journey, you'll find two ready-made 0.3ohm Ni80 Framed Staple coils, as well as some organic cotton, a flat-head screwdriver, and a coil-building jig in your kit!
The dual-coil deck of Yachtvape and Mike Vapes’ Eclipse Dual RTA Atomizer
The ingenious airflow system of the Eclipse kits
Like its predecessor, the Eclipse Dual RTA uses the same honeycomb airflow system, located under the tank. Thanks to its adjustable and removable airflow ring, you can adjust the airflow. Remove it if you want to fully clean your device.
What is the purpose of the screws visible through this airflow knob? To mount your coils on the rebuildable tray, quite simply!
The air intakes of Yachtvape and Mike Vapes’ Eclipse Dual RTA Atomizer
More e-liquid, but still as easy to fill
The Eclipse Dual RTA atomizer is not only bigger in diameter and size! Its Pyrex tanks are also bigger, to accommodate a larger amount of e-liquid.
The basic straight tank will hold up to 4ml of e-liquid. As for the second tank, also included in the kit, it has a bubble shape that can hold up to 6ml of e-liquid.
These tanks are filled from above, as follows:
- Unscrew the top cap
- Insert the tip of your bottle of e-liquid into one of the two holes (never in the middle hole)
- Fill with e-liquid
- Screw the top cap back on
- Vape!
Filling Yachtvape and Mike Vapes’ Eclipse Dual RTA Atomizer
Contents
- The Eclipse Dual RTA atomizer
- A spare Bulb Pyrex tank of 6ml
- A spare drip tip
- A drip-tip adapter
- Two ready-made coils - 0.3ohm Ni80 Framed Staple coils
- Two pads of organic cotton
- A coil-building jig
- A screwdriver
- A set of spare O-rings and screws
- A user guide
The Eclipse Dual RTA atomiser is manufactured by Yachtvape, in collaboration with Mike Vapes.
The contents of Yachtvape and Mike Vapes’ Eclipse Dual RTA atomizer kit
Diameter | 25mm |
---|---|
Coil build | Dual-coil |
Volume | 4 or 6ml |
Atomizer type | Bottom-coil |
Tank | Pyrex |
Fill type | From above |
Drip-tip | 810 with a 510 adaptor included |
Connector pin | Gold-plated 510 |