Voopoo Drag Q Podmod
A little MTL vape specialist, a kit accessible to everybody
-
Maximum power25w
-
Volume3.5ml
-
Battery typeBuilt-in battery
-
Brand
Discover Voopoo's beautiful, ingenious and powerful Drag Q podmod. Our A&L expert tells you everything about it!
The Drag Q podmod is the best value for those who want to start properly or fully indulge in their favourite type of vaping, indirect inhaling (MTL)!
This electronic cigarette is full of quality and simplicity and is as appealing for its design and practicality as for its technical and aromatic performance. Its build-in battery has 1,250mAh of capacity, recharges quickly via USB-C, and offers monitoring by LED indicator. The cartridge has a solid 3.5ml tank, is easily filled from the top and offers MTL and RDL vape with its ITO Coils and unique drip tip. Most importantly, its control dial manages both the airflow and the power.
The electronic cigarette that will never leave you!
Beginners are sure to love it. Small, practical and qualitative, the Drag Q podmod reveals a size as well as first-choice materials. At 118.3mm high, 23mm wide, and 32mm deep, it can be carried anywhere, unobtrusively. Made of zinc alloy and silicone and finished with a beautiful leather-effect coating on the back, it's also lightweight. Comfort and ergonomics are not an option with it!
More than just beginners, any type of vaper will be able to find in it the companion he has been waiting for. Especially if you swear by the tight sensations, typical MTL or RDL!
The Drag Q podmod by Voopoo
An innovative podmod made for beginners
Did you want an electronic cigarette that was easy to get used to?
Between its long-lasting built-in battery, automatic and safe operation, clear information, and easy-to-adjust mechanisms, the Drag Q is undoubtedly one of the best podmods for beginners!
Even its tank is easy to install, as thanks to a clever magnetic system you just have to clip it onto the base of the Drag Q battery!
The magnetic connector of the Drag Q podmod by Voopoo
From 8 to 25W power
Rather intended for beginners and lovers of tight vape, the Drag Q podmod can deliver from 8 to 25 watts maximum. During the whole session, the Gene chipset will take care of everything (short circuits, overloads, dry hits, low battery...).
What you will have to do?
- Light your electronic cigarette: 5 clicks on the fire button;
- Lock it when you are not using it: 3 clicks. Note that it will lock automatically after 5 minutes of inactivity. Inhale or click 3 times to unlock it;
- Adjust the desired feel: simply turn the airflow knob. To the '+' for more airflow and higher power, to the '-' for a tighter airflow and low power.
N.B.: The podmod will automatically limit the power according to the installed coil. It will never exceed the recommended power range to guarantee you a vaping session free of unpleasant dry hits and other annoyances!
The use of the Drag Q podmod by Voopoo
A 1,250mAh built-in battery with a USB-C port and LED indicator
The Drag Q podmod is an efficient integrated battery of 1250mAh, fully secured by the Gene chipset of the manufacturer. A battery with a good capacity that will allow long vaping sessions and will recharge easily and quickly thanks to a micro-USB type C port.
This connection, you will find it under the podmod. Its recharging cable is included in the delivery box.
The recharging USB-C port of the Drag Q podmod by Voopoo
If the Drag Q podmod does not have a display, it will still show you the remaining battery level (or charge level). How? Thanks to the long LED visible on its front, just below its power button!
- Green LED: battery at 60-100%.
- Blue LED: battery at 25-30%.
- Red LED: battery at 0-25%
The 3.5ml ITO-X cartridge of the Drag Q podmod
On the magnetic base of the Drag Q podmod, you will place the ITO-X cartridge included in your kit. Made of stainless steel and PCTG, this tank is sturdy, but above all generous, it can hold up to 3.5ml of e-liquid thanks to a clean and quick top-fill system.
To start your tasting session, you will equip this tank with ITO Coils (two already supplied). Then, you will use its beautiful drip-tip, with a long and tight format, for a rich flavourful vaping experience!
The ITO-X cartridge for Drag Q podmod by Voopoo
ITO Coils, optimised for MTL and RDL
Your ITO-X Drag Q cartridge is only suitable for ITO Coils by Voopoo. These coils are made of Mesh and are particularly efficient for indirect inhale (MTL) and restrictive direct inhale (RDL). In other words, they are made for the Drag Q podmod by Voopoo!
Two coils are already supplied with your e-cigarette:
- ITO-M0 0.5Ω coil, to be used between 18 and 25 watts. Vape RDL.
- ITO-M3 1.2Ω coil, to be used between 8 and 12 watts. Very tight MTL vapour. The ideal coil for your e-liquids with high nicotine content, nicotine salts, or CBD!
To install or change your coil:
- Remove the ITO-X cartridge from the magnetic base of the Drag Q podmod
- Turn it over
- If first installation: soak the new coil of e-liquid and then place it in the middle of the tank, in the place provided for
- If change: pull the used coil and replace it with a new one, previously soaked in e-liquid
- Replace the ITO-X cartridge on the magnetic base of the Drag Q podmod
Caution: a coil is generally changed every 2 to 3 weeks depending on your use.
An adjustable air supply, which automatically adjusts the power!
We told you, the Drag Q podmod is an intelligent electronic cigarette. In addition to presenting a clever system for adjusting the air intake, by a rotary wheel located on its back, the Drag Q podmod is able to automatically adjust the power according to the selected draw.
Thus, if you choose a very tight airflow, indirect inhale type (MTL), or more airy, restrictive direct inhale (RDL), your electronic cigarette will take it into account in the adjustment of watts!
The airflow adjustment knob on the Drag Q podmod by Voopoo
A beautiful e-liquid capacity and an easy filling!
In your beautiful PCTG tank, you can pour up to 3.5ml of e-liquid. A nice capacity, isn't it?
As with any cartridge, you would expect the ITO-X 3.5ml from the Drag Q podmod to have a side or bottom-fill system. But no ! Here, Voopoo goes for the most practical solution, so the top-fill system is preferred.
To proceed with the e-liquid refill:
- Unscrew the top cap (part with drip tip) of the ITO-X cartridge
- Insert the tip of your bottle in the small dedicated hole
- Screw the top cap back onto the ITO-X cartridge
Be careful, never fill through the central orifice. Also, after filling, always wait a few minutes for a good priming of your coil.
The filling of the Drag Q podmod by Voopoo
Contents of the box of the Drag Q podmod
- A 1,250mAh Drag Q built-in battery -
- A 3.5ml ITO-X Drag Q cartridge
- A 0.5Ω ITO-M0 coil
- A 1.2Ω ITO-M3 coil
- A recharging USB-C cable
- A user guide
The Drag Q podmod is made by Voopoo.
Contents of the box of the Drag Q podmod by Voopoo
Maximum power | 25w |
---|---|
Volume | 3.5ml |
Battery type | Built-in battery |
Height | 118.3mm |
Material | Stainless Steel, zinc and silicone |
Width | 23mm |
Depth | 32mm |
Battery capacity | 1250mAh |
Mod type | Electronic |
USB charging | Yes |
Chipset | Gene Pod |
Chipset version | Voopoo |
Compatible coils | ITO Coils |
Temperature control | No |
Tank | PCTG |
Fill type | From above |
Drip-tip | Proprietary |
Connector pin | Proprietary |