Lost Vape Ursa Baby Pod

The Ursa Baby podmod by Lost Vape is making a remarkable entry into the vape world, despite its very small size!

Discover an electronic cigarette in a mini and useful format, with simple, automatic operation and disposable cartridges - with sealed and non-changeable coil!

A small podmod with a lot of style!

Here is a format as small as useful. The Ursa Baby podmod doesn't have that pretty name for anything! Measuring only 47mm high, 68.5mm wide, and 16mm deep, it fits in any hand or pocket! What's more, with its polycarbonate (PC) material, it ensures a wonderful featherweight of only 41.8 grams!

Transport this little podmod everywhere with you! Lost Vape offers you a beautiful neck lanyard to travel and vape with style and ease!

But mostly, enjoy a unique design, all in transparency, with a view of its beautiful electronic equipment, and original and colorful details (different models available).

Lost Vape's Ursa Baby podmod

A podmod with a simple working

Rather meant for beginners, but perfectly adapted to vapers more experimented, searching for add-on kit, the Ursa Baby podmod has been designed to be as easy to use as possible.

That's why this podmod has a built-in 800mAh battery and prefers to operate 100% automatically, without any screen or adjustment buttons. It is of course equipped with an electronic chipset (the famous Quest of the manufacturer) and takes advantage of an ingenious system of LEDs, as well as a USB-C port for fast charging!

How use my Ursa Baby podmod?

With the Ursa Baby podmod by Lost Vape, no need to spend hours dissecting the user manual. This little podmod is very simple to use, just suck through the mouthpiece of its cartridge to activate the heating!

Ingeniously designed, this electronic cigarette automatically detects the cartridge (and therefore the resistance installed), and then provides you with exactly the right power.

Equipped with the manufacturer's famous Quest chipset, this e-cigarette is completely safe. There is no room for short circuits, overheating, dry hits, or overloads with it!

How charge my Ursa Baby podmod?

The Ursa Baby pod is composed of a built-in battery of 800mAh capacity. And, since it has no built-in display, it has two LED indicators to let you know how much battery power is left.

These are located on the side of your electronic cigarette. They will flash:

• Green if the battery is at maximum capacity (between 3.9 and 4.2V)
• In blue if the battery is at about half its capacity (between 3.7 and 3.9V)
• In red if the battery is almost discharged (less than 3.7V)

In other words, if your equipment starts flashing red, you should think about recharging it! To do this :

1. Take the micro-USB type C cable provided in your mod
2. Connect it to the USB-C port located under the Ursa Baby pod
3. Connect it to an external power source (like a laptop for example...)

The recharging USB-C port of Lost Vape's Ursa Baby podmod

For your Ursa Baby pod, the 2.5ml Ursa Nano cartridges

To use your Ursa Baby pod, it will be necessary to equip it with Ursa Nano cartridges by Lost Vape. These PCTG tanks are disposable, i.e. they are already equipped with a coil and must be discarded when they reach the end of their life.

These cartridges feature a solid 2.5ml tank with a clean and intuitive side-filling system. They will fit naturally on the base of your Ursa Baby integrated battery, thanks to their magnetic system.

Already supplied with the Ursa Nano 0.8 ohm cartridge, you will find it here.

The 2.5ml disposable cartridge of Lost Vape's Ursa Baby podmod

A coil already equipped, no need to replace it!

The Ursa Nano cartridge that equips your Ursa baby pod has a particularity, it's already equipped with a coil in its tank, and this latter can't be dismantled.

In other words, once the coil of your cartridge is worn out (burnt taste, strongly reduced steam...), the whole Ursa Nano cartridge must be thrown away!

Here, the sealed coil that equips your tank has a value of 0.8ohm. It's perfect for a fairly tight vape, from 12 to 18 watts. You can use it with e-liquids with high nicotine content, such as nicotine salt or CBD.

N.B.: The Ursa Baby podmod will also accept the Ursa Nano 1ohm cartridge, for very tight throat sensations, either in indirect inhale (MTL).

How adjust the draught on my Ursa Baby podmod?

Like all electronic cigarettes, the Ursa baby pod has an air inlet and a draught control system. Here you will find them on the main front of the podmod. Here you will find them on the main front of the podmod.

Do you see this little hole? This is your air intake! To adjust it, i.e. to increase or restrict its opening, you will be interested in the mechanism located just below. Simply push the knob up, or pull it down to precisely adjust your airflow... Simple, isn't it?

The adjustment system of air intakes on Lost Vape's Ursa Baby podmod

How to fill your 2.5ml Ursa Nano cartridge? 

On the Ursa Baby podmod by Lost Vape, it's its Ursa Nano cartridge that will take care of the e-liquid management. Made of a block, in PCTG material, it ensures a particular robustness, but especially a nice autonomy in liquid, it is up to 2.5ml of e-liquid possible with its tank!

To fill it:

1. Unclip the cartridge from the pod's magnetic base
2. Open the silicone tab on the side of the cartridge
3. Insert the tip of your bottle into the orifice provided
4. Refill

Some precautions should be taken:

• Tilt the cartridge slightly backwards when refilling, to avoid any leakage or spillage of e-liquid
• Never refill your cartridge to the brim
• Always wait about ten minutes after refilling to ensure that your coil is properly soaked

The filling system of Lost Vape's Ursa Baby podmod

Box contents of the Ursa Baby podmod

• An Ursa Baby built-in battery - 800mAh
• A 2.5ml Ursa Nano cartridge - 0.8Ω sealed coil
• Lost Vape's neck strap
• A spare USB-C cable
• A user guide

The Ursa Baby podmod is made by Lost Vape.

The box contents of Lost Vape's Ursa Baby podmod