A&L Kroma Z Beginner Pack

Are you looking for an electronic cigarette to start with, and why not, some e-liquids to find your nicotine rate?

In its Kroma Z beginner pack, A&L offers you the Kroma Z podmod from Innokin, but also three ready-made e-liquids: the Ultimate Ragnarok, Menthe Extra Glaciale, and Ryan USA!

Here is a complete, durable, and upgradeable kit and a selection of 3 high-quality French 10ml e-liquids!

The Kroma Z Ultimate A&L beginner pack

Innokin’s Kroma Z podmod

With its small size (114mm high, 28.5mm wide, and 37mm deep), magnesium alloy body, and pod mod format, the Kroma Z will delight beginner vapers.

Innokin’s Kroma Z podmod

Adjustable power and easy browsing 

The Kroma Z pod mod is equipped with a widescreen, designed to display all the key information like remaining battery level, wattage, and the coil’s resistive value.

It is also equipped with a powerful electronic chipset, which will fully protect your vaping session.

The two small adjustment buttons will allow you to:

1. Increase or lower the power, from 6 to 40 watts
2. Lock your device

In order to vape, use the upper part of the screen, which acts as a trigger!

The screen of Innokin’s Kroma Z Podmod

Last but not least, in addition to being able to adjust the power, you can also adjust the draw and change your drip tip.

By doing so, you will get a tighter or airier vape. The sliding tab for adjusting the airflow is located on the rear panel of the Kroma Z podmod.

The airflow tab of Innokin’s Kroma Z pod mod

Long-lasting and quick to charge

Thanks to its built-in 3,000mAh battery, the Kroma Z podmod will endure your longest vaping sessions! Once its battery runs out of energy, the screen will inform you.

Simply connect the USB-C cable included in the kit to the USB-C port on the e-cig’s front panel. Connect it to a power source and let electricity do the rest!

The USB-C port of Innokin’s Kroma Z pod mod

The Kroma Z cartridge: 4.5ml, Z-Coil compatible

The Kroma Z has a magnetized connector that accommodates the 4.5ml Kroma Z cartridge included in the kit. The latter is a solid tank made of PCTG.

Inside this cartridge is one Z-Coil.

Two of them are already included in the kit:

• One 0.8Ω Z-Coil (pre-installed in the cartridge), to be used between 15 and 18 watts. This coil is perfect for a tight indirect inhale (MTL), also suited to e-liquids with a high nicotine content, nicotine salts, or CBD in them.
• One 0.3Ω Z-Coil, to be used between 30 and 40 watts. This one offers an airier, more restrictive direct inhale (RDL), which is better suited for vapor.

You will have to change your coil every two to three weeks or so. Simply remove the cartridge from the magnetized connector, then turn it upside down, take out the old coil, and put a new one in its place, making sure to pour a few drops of e-liquid onto its cotton wicks first.

The two Z-Coils included with Innokin’s Kroma Z podmod

To fill the Kroma Z cartridge, proceed as follows:

1. Tilt the Kroma Z pod mod forward
2. Open the silicone cap on the back of the podmod
3. Insert the tip of your bottle of e-liquid
4. Fill the tank, but not to the brim
5. Close the silicone cap
6. Wait 5 to 10 minutes before vaping

Filling Innokin’s Kroma Z cartridge

A&L’s three 10ml e-liquids

Arômes et Liquides complements this Kroma Z starter pack with three of its 10ml ready-to-vape e-liquids: A&L Ultimate Ragnarok, A&L Ultimate Shiva, and A&L Ryan USA, three products offering three different flavor profiles.

Discover:

• A&L Ultimate Ragnarok: fresh red fruit flavor
• A&L Ultimate Shiva: fresh mint flavor
• A&L Ryan USA: blond tobacco, caramel, and vanilla flavor

The three 10ml A&L e-liquids included in the Kroma Z starter kit

Our recommendations for using your e-liquid

The use of an e-liquid is strictly reserved for electronic cigarettes.

Before using it, we recommend shaking your e-liquid bottle.

To avoid leakages and extend your coil lifespan, we suggest using a clearomizer suited to the PG/VG rate of your e-liquid.

Which nicotine rate should you choose for your e-liquid? 

The nicotine rate choice depends on your smoking profile and the electronic cigarette used.

If you use an electronic cigarette with a coil superior or equal to 1ohm and a power not exceeding 30 watts, here are our suggestions for the choice of your nicotine rate:

• 3mg/ml for an occasional smoker (fewer than 5 cigarettes per day)
• 3 to 6mg/ml for a moderate smoker (between 5 and 15 cigarettes per day)
• 8 to 12mg/ml for a regular smoker (between 15 and 25 cigarettes per day)
• 14 to 18mg/ml for a tireless smoker (more than 25 cigarettes per day)

If you use a more performing electronic cigarette with coils below 1ohm and for a high power of 30 watts, we recommend using a lower nicotine rate:

• 3mg/ml for the occasional and moderate smokers
• 6mg/ml for the regular smokers

Preservation of your e-liquid

For optimal preservation of your e-liquid, we recommend storing your bottle in a dark and dry place away from the light.

After repeated exposure to air and light, the e-liquid color can darken. This color change doesn’t affect the quality or the taste of your e-liquid.

The date indicated on the label is a BBD (Best Before Date) or DDM (Date of Minimum Durability). Past this date, the e-liquid can still be used.

Warnings and contraindications:

• If you don’t smoke, don’t vape
• Product forbidden to people under 18 years old.
• Do not use an e-liquid if you have a heart condition, vascular disease, cancer, or lung disease.
• In the absence of data on fetal safety, active or passive vaping of e-liquids is not recommended for pregnant or breastfeeding women, particularly if it contains nicotine.

Precautions:

• Keep your bottle in a locked cupboard
• Keep out of children and animals’ reach
• Wear protective gloves and clothes
• IF SWALLOWED: rinse your mouth and call a POISON CENTER or doctor. If a doctor is consulted, keep the bottle or label at hand.

Box contents 

• The Kroma Z battery of 3,000mAh
• One Kroma Z cartridge of 4.5ml
• One 0.8Ω Z-Coil (pre-installed)
• One 0.3Ω Z-Coil
• Two spare drip tips
• An airflow ring
• A USB-C cable
• A user guide
• One 10ml bottle of A&L Ultimate Ragnarok e-liquid
• One 10ml bottle of A&L Ultimate Shiva e-liquid
• One 10ml bottle of A&L Ryan USA e-liquid 

The Kroma Z podmod and its accessories are manufactured by Innokin. The three 10ml e-liquids are made in France by A&L.

The Kroma Z beginner pack is offered by Arômes et Liquides (A&L).

The contents of the Kroma Z Ultimate A&L starter pack