Justfog Q16 FF Kit

Unboxing Justfog’s Q16 FF Kit

The Q16 FF kit by Justfog? The electronic cigarette you need to start effectively in the vaping world!

Enjoy a discreet and light device, bringing together the qualities of the mod Q16 FF and Q16 FF clearomizer for impressive ease of use. The vape is tasty, the draw is tight, and everything reminds the feeling of the classic cigarette, but less harmful!

Justfog’s Q16 FF kit

If you’re a beginner, don’t hesitate! Justfog’s Q16 FF kit is made for you!

Going from traditional cigarettes to electronic cigarettes can be a big change. So, with its Q16 FF kit, Justfog has done everything to make this transition easier. This e-cigarette has been designed to give beginners a great insight into the vaping world: it is discreet, small, and lightweight, whilst being durable, and easy to charge and handle!

With its Q16FF clearomizer, optimized for the rendition of flavors, you will enjoy a tight vape and authentic e-liquid flavors, and you will start your smoking withdrawal the right way!

At 129.6mm high, 17mm wide, and 25.6mm deep, the Q16 FF kit fits in the palm of your hand. It's lightweight (just 60 grams), so it's easy to carry around, and made entirely of polycarbonate (PC) and anodized aluminum, for an elegant and surprisingly robust setup.

Handling the Q16 FF kit

The Q16 FF mod

The giant Justfog loves beginners! With its kits, mods, and clearomizers, it does everything to help you start effectively, and therefore, to keep on vaping.

For its Q16 FF kit, the manufacturer has built an electronic mod to meet your expectations, a reliable device that’s easy to use! Firstly, a built-in battery, with a beautiful autonomy of 900mAh, easily rechargeable via a USB-C port. Then, with an intuitive operation, in a single Variable Wattage mode, for a choice of three powers. Finally, a chipset was selected for its efficiency and numerous electronic protections.

Simplicity for beginners!

The primary objective of Justfog’s Q16 FF kit is to make your vaping session easier. This is why you will not find any screen or multiple vaping modes in its electronic mod. Totally safe, this mod offers only a Variable Wattage mode by default.

The mod also has a very simple front panel, including a power button (for vaping), three LEDs to inform you, and a second button for settings:

1. If only one LED is lit, you are at LV.1, which corresponds to a power of 9W for your 1.2 ohm coil
2. If two LEDs are lit, you are at LV.2, which corresponds to a power of 11W with your 1.2 ohm coil
3. If three LEDs are lit, you are at LV.3, which corresponds to a maximum power of 13W

To switch from one power setting to the other, use the adjustment button located on the mod’s front panel. To switch your mod on and off, press the power button 4 times in quick succession.

The adjustment switch and LEDs of Justfog’s Q16 FF kit

A built-in 900mAh battery with USB-C charging

Extending each of your vaping sessions is the second objective of the manufacturer Justfog and its beautiful e-cig device! The Q16 FF kit is therefore equipped with a powerful built-in battery of 900mAh autonomy.

On the front of the mod, above the fire button that allows you to vape, a system of LEDs will indicate the level of battery remaining:

• White LED: battery at its highest level, between 65% and 100% of its capacity
• Blue LED: medium battery level, between 35% and 65% of its capacity
• Red LED: low battery level, lower than 35% of capacity

The leftover battery LED display of Justfog’s Q16 FF kit

Once your battery is almost dead, you will need to recharge the kit using the USB-C port on the bottom of the device. Plug in the cable provided in your mod, connect it to a power source (any outlet with a USB-C port), and wait. You'll soon be able to resume your tasty session!

The USB-C port of Justfog’s Q16 FF kit

The Q16 FF clearomizer

Created especially for beginners and MTL enthusiasts, combined with the Q16FF mod for its ease of use, the Q16FF clearomizer promises simple and tasty vaping, with a fairly tight throat feel.

In other words, with it, you will find the feelings of the traditional cigarette, but will enjoy the authentic flavors of your e-liquids, regardless of your rate of nicotine, nicotine salt, or CBD!

Filling its 1.9ml tank is easy, changing its 1.2Ω coil is just as easy. Its draw will adapt to your desires and its long 510 drip tip will optimize the pleasure!

The Q16FF clearomizer of Justfog’s Q16 FF kit

A 1.2 ohm FF coil for a tasty vape

A mod needs a battery to operate. Well, a clearomizer needs a coil!

Here, your Q16 FF clearomizer will require an FF coil, from the manufacturer Justfog. You will find one in the kit, with a resistive value of 1.2 ohm.

'FF' stands for 'Flavour Focused', testifying to the coil’s capacity to render any flavor with an authentic mouthfeel. Its value of 1.2Ω will allow you to use it with e-liquids with high nicotine contents, nicotine salts, or CBD. The feeling is tight, typical of indirect inhale vaping (MTL), and therefore, perfect for beginners!

On the Q16 FF clearomizer, the resistance will be changed approximately every 2 to 3 weeks, as soon as you feel an unpleasant taste, if your vapor is too weak, or if you want to change the e-liquid flavor.

To change it:

1. Unscrew the base of your clearomizer
2. Unscrew the coil that’s already in the clearomizer. Screw the new coil in its place, making sure to soak its cotton wicks with a few drops of e-liquid beforehand.
3. Put the clearomizer back together
4. Fill the tank!

An air intake system designed for MTL vaping

When we start, we often appreciate a tight vapor, reminiscent of the one produced by traditional cigarettes. That's why the Q16 FF clearomizer has a special MTL air intake system, for a tight, indirect inhale vape (MTL).

On the bottom of the clearo is an airflow ring, with some nice apertures. This mechanism is there for adjusting your draw. Turn the ring from right to left to reduce or increase the airflow.

Note that the smaller the hole is, the tighter the draw is.

The adjustable air intakes of Justfog’s Q16 FF kit

An easy-to-fill 1.9ml tank!

Born to satisfy the desires of beginner vapers, the Q16 FF clearomizer does not need a large tank of e-liquid. When MTL vaping, the consumption is not that great, so the tank has better autonomy. That's why the 1.9ml of the Q16 FF clearomizer is more than enough, you'll see!

To fill this beautiful tank, simply proceed as follows:

1. Turn the top cap, following the red arrow
2. Insert the tip of your bottle of e-liquid into the red silicone hole
3. Fill the tank (never to the brim)
4. Turn the top cap back to close the hole
5. Wait for about 10 minutes for the coil to prime itself properly

A little tip: close your air intake before filling. This will prevent any unfortunate e-liquid leaks! As soon as you’ve filled the tank, flip the clearomizer upside down and then reopen your air intakes.

Filling Justfog’s Q16 FF kit

Contents

• The Q16 FF mod
• The Q16 FF clearomizer
• One 1.2Ω FF coil
• A USB-C cable
• A user guide

The Q16 FF kit is manufactured by Justfog.

The contents of Justfog’s Q16 FF kit