Drag X Discovery Pack

Arômes et Liquides offers you an all-in-one pack so you can make the most of Voopoo's famous Drag X podmod, a nice and comfortable electronic cigarette that'll rapidly become your day-to-day kit.

This e-cigarette has a maximum power of 80 watts and is equipped with the manufacturer's Gene TT chipset, which offers plenty of electronic protection and incredible performances.

The kit already comes with a 4.5ml PnP cartridge, also made by Voopoo, and you'll find it includes 2 PnP coils as well. And to make things easier for you, we've included an MC1 Plus battery charger from Xtar, which will allow you to easily and safely recharge the pack's Sony VTC6 18650 3000mAh battery.

The Drag X Discovery Pack

Quality and looks

The Drag X podmod is made from a quality zinc alloy, measures 95mm high and 32.5mm, and it has a 28mm diameter. So, it's a very light and compact kit that'll fit nicely in the palm of your hand. Moreover, its pleasant leather coating will undoubtedly win you over!

Voopoo's device has a maximum power of 80 watts, a legible colour screen, and the Gene TT chipset, which is incredibly responsive and secure. Indeed, in addition to providing you with all the usual electronic protections, it'll automatically recognise the installed coil and adjust the power output accordingly.

The screen of Voopoo's Drag X pod

A VTC6 18650 battery and an MC1 Plus charger!

Voopoo decided that the Drag X would be powered by a single 18650 battery, which fits inside a battery compartment that's accessed beneath the podmod.

You'll also find a USB-C port on front of the podmod, and a USB-C cable in the kit for charging the device when you're out and about!

However, we do recommend you use the external charger when possible, as it increases the service life of your batteries.

The Drag X's battery compartment

Rest assured, you won't have to search for the right type of battery! Arômes et Liquides have put one in the pack, namely one of Sony's VTC6 18650 batteries. It's a quality product whose 3000mAh capacity will keep you vaping for a long while before running out.

Sony's VTC6 18650 battery

As we said earlier, it's better to charge the 18650 battery with an appropriate charger, so Arômes et Liquides included Xtar's MC1 Plus charger in the pack for this purpose.

It's compatible with all battery sizes, from 10440 to 26650, and it features three charging modes as well as an LED indicator.

Xtar's MC1 Plus charger

A generous and easy-to-use tank

Voopoo decided to equip their Drag X podmod with their PnP cartridge. The latter has a 4.5ml capacity, and you may recognise it from the manufacturer's Drag S kit. It's made from PCTG plastic, which is very robust, and its clever bottom-fill system makes for an easy refill.

The cartridge is compatible with the whole range of PnP coils, and you can even use Voopoo's PnP MTL cartridge if you wish, which has a 2 ml capacity.

Voopoo's PnP cartridge

A cartridge that's compatible with Voopoo's PnP coils

You'll find two PnP coils included in the kit, also made by Voopoo:

• a 0.15 ohm PnP VM6 coil, to be used between 60 and 80 watts. It will provide you with a good amount of vapour and will perfectly transcribe your e-liquid's flavour!
• a 0.3 ohm PnP VM1 coil, to be used between 32 and 40 watts, for a tasty vape and still as much vapour!

Note that you can also equip Voopoo's RBA deck (sold separately), if you want to make your own coil builds!

The two coils that come with Voopoo's Drag X podmod

Precise and adjustable air inlets

On the side of the Drag X pod, there's a small slider that allows you to adjust the amount of air that enters the cartridge. By sliding it right or left, you'll either open or close the air inlets, resulting in a more or less tight draw.

The Drag X's airflows

A bottom-fill system for more safety!

In order to make filling the cartridge easier, Voopoo has designed a bottom-fill system. You have to unclip the tank from the electronic cigarette's base, flip it over and lift the silicone flap. Insert the nozzle of your e-liquid bottle into the hole and pour your juice in!

Filling Voopoo's PnP cartridge

Contents

• the Drag X podmod
• one PnP cartridge for the Drag X podmod
• one 0.15 ohm PnP VM6 coil
• one 0.3 ohm PnP VM1 coil
• an USB-C cable
• Xtar's MC1 Plus charger with its micro-USB cable
• one 18650 VTC6 battery
• user guides

The Drag X podmod is manufactured by Voopoo. The MC1 Plus charger is made by Xtar. The VTC6 18650 battery is made by Sony.

The contents of the Drag X Discovery Pack