Innokin Sceptre MTL Cartridge

Whether you need to replace your used coil or simply alternate e-liquid flavors during the day, here is a spare cartridge.

Specially made for your Sceptre podmod, this cartridge is compatible with the S-Coil by Innokin, from 0.65ohm.

You'll find it in the box with two 0.65ohm coils meant for a tight draw in indirect inhaling (MTL).

Innokin's Sceptre MTL cartridge

Removable coils

Like the original received with your Sceptre podmod, the Sceptre MTL cartridge has a 3ml e-liquid capacity.

However, this MTL version is particularly suited to a tighter vape in indirect inhaling.

This tank is delivered with two coils (with one pre-installed) with a value of 0.65ohm, to use between 10 and 12.5 watts.

After two to three weeks of use, the coil will start to show some signs of wear (loss of flavors, light burnt taste). It will be time to replace it.

For this:

1. Pivot the bottom part of the cartridge and pull on it to take it off
2. Take the used coil out
3. Soak a new coil with some e-liquid drops
4. Insert it in its compartment
5. Reconnect it to the bottom part
6. Fill it with e-liquid
7. Wait for a few minutes before vaping it so your coil is correctly primed

An adjustable airflow

Even if the Sceptre MTL cartridge is meant for a rather tight draw, Innokin allows you to customize your vape experience.

For this, you only need to use the sliding button located on the bottom part of the tank to free more or less the air intake.

The airflow button of Innokin's Sceptre MTL cartridge

How to fill your tank?

Follow the steps below to proceed to the 3ml filling of the tank of your Sceptre MTL cartridge:

1. Take the cartridge off the podmod
2. Lift the silicon strip located on the side of the tank
3. Insert the thin tip of your bottle
4. Softly pour your e-liquid
5. Carefully close the strip
6. Reconnect the cartridge on the podmod

Reminder: wait 5 to 10 minutes before vaping if you use a new coil.

The filling of Innokin's Sceptre MTL cartridge

Box contents

• 1 3ml Sceptre MTL cartridge
• 2 S-Coil coils of 0.65ohm (one pre-installed)

The Sceptre MTL cartridge is made by Innokin.

Box contents of Innokin's Sceptre MTL cartridge