Vaporesso X Mini Cartridge (x2)

With your X Mini pod, you already have a 4ml polycarbonate (PC) cartridge. But what about alternating between two flavors? Or anticipating potential fatal falls?

Vaporesso presents here a set of two replacement cartridges. Solid tanks, still made of polycarbonate (PC), with the same generous 4ml capacity and the same quick filling from below.

The X Mini cartridge for X Mini pod by Vaporesso

The cartridge of your X Mini pod by Vaporesso!

Only compatible with the X Mini pod from Vaporesso, these two X Mini cartridges will clip onto the magnetic base of its integrated battery. Made of a single block of polycarbonate (PC), their drip-tip is non-removable (therefore not changeable). However, they will let you install the X35 coil of your choice, as well as choose an e-liquid to fill their nice 4ml tank!

The magnetic base of the X Mini pod, on which to place your X Mini cartridge by Vaporesso

X35 resistors: to be purchased separately

Delivered empty of any coil, the X Mini cartridges can still accommodate powerful coils: the X35 by Vaporesso.

Once you have chosen and unpacked your coil, you will soak it with a few drops of e-liquid to prime it, then you will place it in your cartridge. Unclip the cartridge from the pod's magnetic base, turn it upside down, and simply install this coil in the center of the tank, in the slot provided for this purpose!

N.B: Generally, a coil should be changed every two to three weeks. Remember to soak each new coil with a few drops of e-liquid to ensure optimal priming.

An airflow regulated by the cartridge

If the air inlets of your X Mini pod are indeed on its integrated battery part, the adjustment of these will be done by the cartridge. Once in place on the pod's magnetic base, you will simply have to turn the body of the cartridge itself to block or increase these beautiful and long openings.

On the menu? Tailor-made vape, for a tight, restrictive, or completely aerial draw!

The airflows of the X Mini pod, adjustable with the X Mini Vaporesso cartridge

4ml solid tanks, in PC material

When you see the small size of the X Mini pod, you expect a small e-liquid capacity. And no! On this electronic cigarette, Vaporesso is still thinking big, its X Mini cartridges are capable of receiving up to 4ml of e-liquid.

To do this, they are equipped with a bottom-filling system. Unclip the cartridge from its slot, turn it over, then open the small door that contains the access to the filling hole. From there, simply insert the tip of your bottle and refill with e-liquid.

Be careful, never fill to the brim. Also, remember to wait a few minutes after reloading to make sure that the coil is correctly primed!

The filling of the X Mini cartridge, for X mini pod by Vaporesso

The set of two X Mini cartridges for X Mini pod is made by Vaporesso. These cartridges are only sold in sets of 2 and are presented empty, without coils or accessories included.