BP Mods Tomahawk BF Adapter

BP Mods’ versatile Tomahawk SBS & Squonk mod can be used either as a standard electronic mod or as a bottom-feeder!

To do so, BP Mods lets you equip a BF adapter with a 5.5ml silicone squonk bottle. This adapter is exactly the same as the one that comes in the original kit. You’ll be ready for any mishap, and you’ll be able to make the most of its greater eliquid capacity!

The 5.5ml squonk bottle adapter of BP Mods’ Tomahawk mod

A squonk bottle adapter for your Tomahawk

This stainless steel adapter and its built-in 5.5ml silicone bottle is designed to be used with the Tomahawk SBS & Squonk mod from BP Mods. As it’s equipped with a 510 BF pin, you will be able to screw any atomiser or dripper onto it, provided they’re compatible and have a maximum diameter of 24mm.

Know that the different parts of this adapter (frame, bottle, cover) can be disassembled. Therefore, you can easily clean or replace these parts if you need to!

Setting up the silicone squonk bottle

If you want to use the Tomahawk SBS & Squonk mod in bottom-feeder mode and enjoy a generous e-liquid capacity, you will have to install this adapter and its silicone squonk bottle.

To do so:

1. Unscrew the atomiser or clearomiser that you’ve installed on the Tomahawk mod
2. Screw the adapter onto the standard 510 pin
3. Screw an atomiser or dripper with a 510 BF pin onto the adapter’s 510 BF pin

BP Mods' Tomahawk SBS & Squonk mod with the BF adapter attached

Filling the silicone squonk bottle

If you have chosen to use the BF adapter and the silicone squonk bottle, you’ll definitely want to fill up with e-liquid from time to time!

To do so:

1. Unscrew the atomiser or dripper you have installed
2. Lift the black silicone tab on top of the squonk tank (there are arrows to guide you)
3. Insert the tip of your bottle of e-liquid into the filling hole
4. Close the silicone cover tab
5. Screw your atomiser or dripper back on

Filling BP Mods' Tomahawk BF adapter

Contents

• A BF adapter with a 5.5ml silicone squonk bottle for the Tomahawk mod
• A spare silicone squonk bottle of 5.5ml
• A set of spare parts

The 5.5ml BF Squonk Bottle Adapter for the Tomahawk SBS & Squonk mod is manufactured by Dovpo for BP Mods.

The contents of BP Mods' Tomahawk BF adapter kit