A&L Drag X3 Discovery Pack

Thanks to this complete pack offered by Arômes et Liquides, you can start using your Drag X3 podmod from Voopoo as soon as you receive it!

With a maximum power of 80W, its high-performance Gene TT 2.0 chipset provides enhanced protection and an innovative 1.66" HD touchscreen. Already equipped with the 5ml PnP X DTL cartridge, the Drag X3 podmod comes with 2 PnP X coils (0.15 and 0.3ohm), designed for an airy draw in direct inhalation.

Your pack also contains a 4,200mAh 20A IMR 21700 battery from Vap Procell, to be inserted into the dedicated compartment on the Drag X3 podmod.

Voopoo Drag X3 / Vap Procell 21700 battery Discovery Pack

The Drag X3 podmod

Voopoo presents the X3 version of its Drag, an electronic cigarette designed specifically for enthusiasts of airy vaping with direct inhalation (DL) or restricted direct inhalation (RDL).

Featuring the manufacturer's Gene TT 2.0 chipset, this podmod allows you to vape at up to 80W of power.

In terms of battery life, it is powered by a 21700 or 18650 battery with the included adapter.

This starter kit includes a 21700 battery, allowing you to enjoy optimal battery life.

In terms of design, the Drag X3 measures 132.7x34.2x27.8mm and features a faux leather coating for a comfortable grip.

Handling of Voopoo's Drag X3 podmod

The functioning of the Drag X3 podmod

Designed for both beginners and experienced vapers, the Drag X3 podmod by Voopoo focuses on innovation with its touchscreen.

No more adjustment buttons—simply slide your finger across the 1.66" HD screen of your e-cigarette to access various functions such as theme changes and lock options.

To offer you a customized vaping experience, there are three power modes to choose from via the touchscreen:

• SMART mode: automatically adjusts the power according to the installed coil
• RBA mode: allows you to manually adjust the power of the pod from 5 to 80W
• ECO mode: promising up to 10% battery savings by using the minimum settings

There is no built-in battery here, but a 21700 battery (included in the pack).

The touchscreen of Voopoo's Drag X3 podmod

A smart Switch button

With its Drag X3, Voopoo also focuses on safety thanks to its smart power button with capacitive detection.

It is activated only when your finger touches it! This system prevents the podmod from being accidentally activated when carried in your pocket or bag, for example.

The switch button of Voopoo's Drag X3 podmod

A Vap Procell 21700 battery included

With its Drag X3 podmod, Voopoo focuses on battery life with a single 21700 or 18650 battery with the included adapter.

A&L includes a 21700 battery in this Discovery Pack, allowing you to use your e-cigarette as soon as you receive it with optimal battery life.

Once you have unpacked your Vap Procell 4,200mAh IMR 21700 battery, insert it into the dedicated compartment.

To do this, remove the magnetic cover from the podmod and position your battery according to the polarity.

The single battery compartment of Voopoo's Drag X3 podmod

Be sure to follow all safety rules, both when using the battery and when transporting or storing it:

• Keep away from all sources of heat
• Do not use if there are signs of wear or damage (use a wrap to repair it)
• Respect the positive and negative poles when inserting it into the box or external charger
• Always use an external charger rather than recharging via the USB port of your kit
• Always use a protective case when transporting or storing your battery

Vap Procell's 4,200mAh 20A IMR 21700 battery

If the battery runs out, you can always use the USB-C cable provided to recharge your e-cigarette. The port is located just below the touchscreen.

However, we recommend that you use an external charger (not provided) whenever possible to recharge your battery.

The USB-C port of Voopoo's Drag X3 podmod

The PnP X DTL cartridge

Securely held in place on its magnetic base, the PnP X DTL cartridge has a 5ml tank.

Voopoo has specially designed it to accommodate PnP X coils, which are ideal for airy draw in direct inhaling.

You will find two coils in the podmod box:

• 1 PnP X 0.15ohm coil (pre-installed): to be used between 60 and 80W, for a very airy vape
• 1 PnP X 0.3ohm coil: to be used between 32 and 40W, for a slightly more restrictive draw

Furthermore, if after two to three weeks of use, your coil shows signs of wear: loss of flavor, slight burnt taste. It will then be time to replace it with a new one.

To change the coil:

1. Remove the cartridge from its magnetic base
2. Extract the used coil
3. Soak the new coil with a few drops of e-liquid
4. Install the new coil in its compartment
5. Fill the tank with e-liquid
6. Wait 5 to 10 minutes before vaping for optimal priming

The PnP X DTL cartridge of Voopoo's Drag X3 podmod

A top airflow

Voopoo has equipped its Drag X3 podmod with an airflow adjustment system at the top of the cartridge, known as top airflow.

To switch between a very airy draw and a tighter vape, simply turn the notched ring located at the top of the tank.

The airflow of Voopoo's Drag X3 podmod

How to fill your 5ml tank?

When it's time to refill the e-liquid cartridge, follow the steps below:

1. Detach the cartridge from its magnetic base
2. Lift the silicone tab on the side
3. Insert the narrow tip of your bottle into the refill hole
4. Gently pour your e-liquid until the tank is three-quarters full
5. Carefully close the tab
6. Replace the cartridge on the podmod

Remember to wait 5 to 10 minutes before vaping if you are using a new coil, to allow time for it to properly absorb the e-liquid.

Filling the PnP X cartridge of Voopoo's Drag X3 podmod

Contents of Drag X3 Discovery Pack

• 1 Voopoo Drag X3 podmod
• 1 5ml PnP X DTL cartridge (pre-installed)
• 1 0.15ohm PnP X coil (pre-installed)
• 1 0.3ohm PnP X coil
• 1 USB-C cable
• 1 18650 adaptor
• 1 user guide
• 1 4,200mAh 20A IMR 21700 battery by Vap Procell

The Drag X3 Discovery Pack is offered by Arômes et Liquides.

Box contents of A&L Drag X3 Discovery Pack