A&L XROS Pro 2 Discovery Pack

Do you wish to try vaping but don't know where to start? A&L simplifies this process with this discovery pack: the XROS Pro 2 podmod and 3 10ml e-liquids with nicotine, by the brand Arômes et Liquides.

This pack contains all you need to start on the right foot. The XROS Pro 2 podmod stands out with its small dimensions, its 2,000mAh capacity, and ease of use.

It is matched with two XROS cartridges of 3ml, integrating the Corex 3.0 technology with sealed coils of 0.4ohm or 0.6ohm of your choice.

Three A&L e-liquids with nicotine salts are also available in 3mg, 6mg, or 12mg/ml.

While ordering, you can choose the color of your podmod and the nicotine dosage suited to you. A customized pack made for beginners.

Vaporesso's XROS Pro 2 Discovery Pack

The Vaporesso XROS Pro 2 podmod

For the podmod, Vaporesso chose to stay true to the design of the XROS collection. These compact dimensions of 125.6x25.7x18.4mm and its lightweight of 65g enable you to transport it easily.

On the main side, a TFT screen of 0.96" displays all the essential information: the battery level in percentage, the vape mode, the locking state, and a puff counter.

The adjustable airflow is positioned on the back of the kit.

Handling of Vaporesso's XROS Pro 2 podmod

An easy-to-use podmod

Simple to use, the XROS Pro 2 turns on and off by pushing the main button 5 times.

With the latter, you can also set by:

• 2 presses: choose among 6 themes
• 3 presses: change the mode (NORMAL, ECO, POWER)
• 4 presses: open the menu

In the settings, you can customize your experience by locking the screen, managing animations, viewing your puff history in graph form, or choosing between automatic activation (auto-draw) and manual activation (fire button).

In addition, with the 0.6ohm cartridge, you can enjoy three preset modes tailored to your preferences: NORMAL at 21W for a tight draw, ECO to save battery life, or POWER for maximum power.

As for the 0.4ohm cartridge, you can manually adjust the power via the menu.

The screen of Vaporesso's XROS Pro 2 podmod

A built-in battery rechargeable via USB-C

With a 2,000mAh battery, the XROS Pro 2 offers a comfortable capacity.

The charge left is indicated in two ways: the precise percentage on the TFT screen and a colored LED.

Is your battery low? Simply connect the USB-C cable included to the port located under the podmod and then connect it to a power source (wall socket, computer, or external battery).

The USB-C port of Vaporesso's XROS Pro 2 podmod

An adjustable airflow

To customize your draw, the XROS Pro 2 features an adjustable airflow located on the rear panel.

Slide the knob to open or close the opening for a tighter or airier draw, depending on your preference.

The airflow of Vaporesso's XROS Pro 2 podmod

Two Corex 3.0 3ml XROS cartridges

The XROS Pro 2 kit comes with two 3ml cartridges equipped with sealed coils featuring Corex 3.0 technology.

You get a 0.4ohm cartridge (pre-installed) for a draw in restrictive direct inhalation between 20 and 30W, and a 0.6ohm cartridge for a tight draw in indirect inhalation between 15 and 24W.

The cartridge of Vaporesso's XROS Pro 2 podmod

Filling is done from the top (top-filling) easily without having to remove the cartridge from the podmod.

Here are the steps to follow to refill your tank with e-liquid:

1. Remove the mouthpiece by pulling on it
2. Insert the thin tip of your bottle into the filling hole (be careful of the central chimney)
3. Pour in your e-liquid
4. Replace the mouthpiece
5. Wait 5 to 10 minutes before using a new cartridge for the first time

As it is disposable, when your cartridge shows signs of wear, simply replace it with a new one.

Filling the cartridge of Vaporesso's XROS Pro 2 podmod

3 10ml e-liquids by A&L

To complete this discovery pack, Arômes et Liquides offers three 10 ml e-liquids ready to vape with three distinct flavors. You will receive A&L Ultimate Ragnarok, A&L Menthe Extra Glaciale, and A&L Ryan USA.

• A&L Ultimate Ragnarok: red fruit flavor and fresh taste
• A&L Menthe Extra Glaciale: mint flavor and very fresh taste
• A&L Ryan USA: classic blond, caramel, and vanilla taste

When placing your order, you can select the nicotine rate that suits you from 3, 6, or 12 mg/ml, for a complete pack tailored to your needs.

The A&L's three 10ml e-liquids included in the XROS Pro 2 discovery pack

Our recommendations for using your e-liquid

The use of an e-liquid is strictly reserved for electronic cigarettes.

Before using it, we recommend shaking your e-liquid bottle.

To avoid leakages and extend your coil lifespan, we suggest using a clearomizer suited to the PG/VG rate of your e-liquid.

Which nicotine rate should you choose for your e-liquid? 

The nicotine rate choice depends on your smoking profile and the electronic cigarette used.

If you use an electronic cigarette with a coil superior or equal to 1ohm and a power not exceeding 30 watts, here are our suggestions for the choice of your nicotine rate:

• 3mg/ml for an occasional smoker (fewer than 5 cigarettes per day)
• 3 to 6mg/ml for a moderate smoker (between 5 and 15 cigarettes per day)
• 8 to 12mg/ml for a regular smoker (between 15 and 25 cigarettes per day)
• 14 to 18mg/ml for a tireless smoker (more than 25 cigarettes per day)

If you use a more performing electronic cigarette with coils below 1ohm and for a high power of 30 watts, we recommend using a lower nicotine rate:

• 3mg/ml for the occasional and moderate smokers
• 6mg/ml for the regular smokers

Preservation of your e-liquid

For optimal preservation of your e-liquid, we recommend storing your bottle in a dark and dry place away from the light.

After repeated exposure to air and light, the e-liquid color can darken. This color change doesn’t affect the quality or the taste of your e-liquid.

The date indicated on the label is a BBD (Best Before Date) or DDM (Date of Minimum Durability). Past this date, the e-liquid can still be used.

Warnings and contraindications:

• If you don’t smoke, don’t vape
• Product forbidden to people under 18 years old.
• Do not use an e-liquid if you have a heart condition, vascular disease, cancer, or lung disease.
• In the absence of data on fetal safety, active or passive vaping of e-liquids is not recommended for pregnant or breastfeeding women, particularly if it contains nicotine.

Precautions:

• Keep your bottle in a locked cupboard
• Keep out of children and animals’ reach
• Wear protective gloves and clothes
• IF SWALLOWED: rinse your mouth and call a POISON CENTER or doctor. If a doctor is consulted, keep the bottle or label at hand.

Contents of A&L XROS Pro 2 Discovery Pack

• 1 2,000mAh Vaporesso XROS Pro 2 podmod
• 1 cartridge of Corex 3.0 0.4ohm sealed coil (pre-installed)
• 1 cartridge of Corex 3.0 0.6ohm sealed coil
• 1 USB-C cable
• 1 user guide
• 1 A&L Ultimate Ragnarok 10ml e-liquid
• 1 A&L Menthe Extra Glaciale 10ml e-liquid
• 1 A&L Ryan USA 10ml e-liquid

The XROS Pro 2 podmod is made by Vaporesso. The three 10ml e-liquids are made in France by A&L.

The XROS Pro 2 Discovery Pack is offered by Arômes et Liquides (A&L).

Contents of A&L XROS Pro 2 Discovery Pack