Advken Fob AIO Kit

Advken comes back with an AIO kit of high quality. Functioning with a single 18650 battery (not included) and delivering no less than 80W of power, this compact kit will accompany you along your puffs.

Delivered with a 5ml boro tank, this tank holds single coil builds. It includes easily changeable 6 airflow pins. With a clever drip tip, you can easily tighten your nut.

Advken's FOB AIO kit

A design of high-quality

With its dimension of 89 x 42 x 26m and its conception in aluminum alloy, it will find its place in your pocket or handbag for example.

Rather meant for a tight draw in indirect inhaling (MTL) or airier in restrictive direct inhaling (RDL), this AIO is matched with a 510 drip tip.

On the main side, you'll find a screen. On the right side, there are two setting buttons and a Fire button. On the other end, you'll benefit from a USB-C port.

Handling of Advken's FOB AIO kit

A simple watt setting

Advken bets on a simple setting in watts. You'll only have to proceed to the setting by pushing one of the two lateral buttons in the kit. You can choose a value between 5 and 80W.

The screen of Advken's FOB AIO kit

A single battery compartment

This Fob AIO kit functions with a 18650 battery (not included). You'll access the compartment by lifting the magnetic door. Find the polarity sense to correctly insert the batteries and a notched wheel.

The battery compartment of Advken's FOB AIO kit

Good news, if you need a solution to charge it then you'll benefit from a USB-C port. You only have to connect a USB cable compatible with an external charger.

To recharge your battery in the best of ways, we recommend using a dedicated charger.

The USB-C port of Advken's FOB AIO kit

A tank with a Boro format

The brand Advken bets on a 5ml tank to allow you to vape your favorite e-liquid for a long time. Made for the Fob AIO, it will perfectly go in the dedicated compartment.

This Boro tank can be inserted in any other compatible mod. It has a PCTG panel so your tank is always protected.

The deck of Advken's Fob AIO kit

It is matched by an RBA deck that needs a single coil deck. However, note that the coil has to have opposed ends to make your build. This deck is mainly meant for expert users as it is rather small.

A multitude of vape experiences

The famous manufacturer chose to include no less than 6 airflow pins to leave you the possibility to change your vape experience. You'll find pins going from 1.5mm to 4mm. The latter is already pre-installed.

To quickly and simply change it, you only have to take the tank off the kit and then unscrew the pin before replacing it.

The airflow pins of Advken's Fob AIO kit

How to fill the tank?

After vaping the 5ml of capacity, you'll need to refill the tank. For this, don't hesitate to use the following guide:

1. Take the PCTG panel off
2. Slide the tank glass towards the bottom
3. Insert the thin tip of your bottle in the opening
4. Fill
5. Close the glass
6. Replace the panel in PCTG

The filling of Advken's Fob AIO kit

Box contents

• 1 5ml Advken Fob AIO kit
• 6 airflow pins
• 1 set of accessories

Box contents of Advken's Fob AIO kit