Dotmod DotAio X Kit

Three removable modules linked to a system of magnetic connection to make an all-in-one kit: the DotAIO X kit! Discover it in our A&L video!

With its DotAIO X, Dotmod presents a real innovation in the All-In-One universe.

Meant for vapers comfortable with the electronic cigarette, this all-in-one kit stands out by its conception in three distinct modules with magnetic connections.

The DotAIO X offers several setting modes: vari-wattage (from 5 to 60W), Temperature Control, Bypass, and Automatic.

This kit is delivered with the DotAIO V3, a 4ml tank specially made to hold the pre-made DotAIO coils.

Dotmod's DotAIO X kit

Your entirely adjustable AIO kit

Three modules make one and only kit, the success of the manufacturer Dotmod!

With a refined style with nice finishes, the DotAIO X is composed of three distinct parts gathered thanks to a performing and handy magnetic connection system:

• 1 module for the 18650 battery
• 1 module for the chipset/screen
• 1 module for the tank

The three modules of Dotmod's DotAIO X kit

Once it is gathered, these modules create an electronic cigarette in a rectangular format with dimensions of 82x48x23mm for optimal handling for your vape sessions.

Handling of Dotmod's DotAIO X kit

Several functioning modes

The chipset module presents a discreet and handy screen that gives access to different setting modes of your DotAIO X kit: Vari-wattage (from 5 to 60W), Vari-voltage (from 1 to 10V), Bypass, Curve.

The DotAIO X also has an automatic mode that adjusts the power according to the coil value used among the 4 setting values.

The screen of Dotmod's DotAIO X kit

A module meant for the 18650 battery

Your DotAIO X kit is supplied thanks to an 18650 battery (not included) to insert in the dedicated module.

Open the magnetic door to the compartment and insert a battery by helping '+' and '-' symbols to respect the polarity sense.

The single battery 18650 compartment of Dotmod's DotAIO X kit

Even if we recommend using an external charger as much as possible, your kit presents a USB-C port located on the battery module.

Use the USB-C cable included in the box to fill your e-cig with energy.

The USB-C port of Dotmod's DotAIO X kit

The DotAIO V3 tank

This 4ml tank also has an adjustable module, the latter can be replaced by the RBA Boro Tank module (not included).

Specially made to hold the Dotmod AIO, the DotAIO V3 tank is accessible to a lot of vapers.

The DotAIO X kit is delivered with two coils:

• 1 0.3ohm Dot AIO coil: to use between 25 and 40 watts for an airy vape
• 1 0.7ohm Dot AIO coil: to use between 14 and 20 watts for a more restrictive draw

To install your coil in the tank:

1. Pull on the top and bottom parts of the tank to disconnect it
2. Soak a new coil with some drops of e-liquid
3. Insert the coil in the top part
4. Fill it with e-liquid
5. Wait some minutes before vaping it so the new coil is correctly primed

The DotAIO V3 tank of Dotmod's DotAIO X kit

In addition to the value of the coil, you can also vary your vape style by adjusting the air intake under the cartridge.

To do this, slide the switch beneath the tank to make the airflow hole more or less free.

The airflow button under the tank of Dotmod's Dot AIO X kit

How to fill the DotAIO V3 tank?

Once your coil is installed, it will be time to fill your 4ml e-liquid tank.

For this:

1. Take the magnetic panel out
2. Slightly pull on the silicon strip
3. Insert the tip of your bottle
4. Pour your e-liquid
5. Carefully close the strip
6. Replace the magnetic panel

The filling tank of Dotmod's DotAIO X kit

Box contents

• 1 DotAIO X kit
• 1 4ml DotAIO V3 tank (pre-installed)
• 1 0.3ohm Dot AIO coil
• 1 0.7ohm Dot AIO coil
• 1 USB-C cable
• 1 bag of spare pieces
• 1 user guide

The DotAIO X kit is made by Dotmod. It is sold without batteries.

Box contents of Dotmod's DotAIO X kit