Voopoo Drag 4 Kit
A performing kit with an 18650 dual battery mod and a 5.5ml clearomizer!
-
Diameter25.5mm
-
Maximum power177w
-
Volume4 or 5.5ml
-
Brand
By betting on 177W power and a capacity delivered by two 18650 batteries (not included), the brand Voopoo created a kit for a vaper looking for excellence.
Made around the famous Gene TT 2.0 chipset, you'll customize your experience by enjoying diverse modes including a temperature control meant for experts.
All the settings are made through a 0.96" OLED-colored screen with a setting button.
Voopoo's Drag 4 kit
A design mixing elegance and sturdiness
The brand Voopoo created its mod for vapers looking for a powerful mod that can keep up for long vape sessions.
With dimensions of 147 x 52.4 x 25.5mm and a zinc alloy and stainless steel cover, you'll enjoy agreeable handling while ensuring transport safety.
Handling of Voopoo's Drag 4 kit
An efficient chipset
To turn your mod on and enjoy your favorite recipe, you can: use the sliding button or push the Fire button 5 times.
Meant for vape beginners or experts, this electronic mod has the following modes:
- SMART mode: automatic setting of the power according to the coil value installed
- TC mode: manual setting of the temperature according to the coil wire used in your atomizer (Ni, Ti, SS)
- RBA mode: manual setting of the power from 5 to 177W. You'll have to respect the power range meant for your coil
- Eco mode: automatic setting allowing to extend the capacity. This mode will activate when the capacity left is below or equal to 20%
The OLED screen of Voopoo's Drag 4 kit
Two 18650 batteries
To guarantee long vape sessions, the brand Voopoo presents its kit meant to hold two 18650 batteries.
To access the compartment, slightly pull on the opposite side of the screen. Take the example of the indication located in the compartment to respect the polarities '+' and '-'.
Don't hesitate to use the strip to easily pull your batteries out to recharge them.
The dual 18650 battery compartment of Voopoo's Drag 4 kit
A possible USB-C recharge
This Drag 4 kit has a USB port allowing you to fill it with energy. Use the USB-C cable included that you'll connect to the port located below the settings button and a mural charger.
However, note that it is highly recommended to recharge your batteries with an external charger.
The USB-C port of Voopoo's Drag 4 kit
A great clearomizer
This electronic mod has a UFORCE-L clearomizer offering a 4ml capacity or a 5.5ml if you use the bulb Pyrex included.
It is delivered with two PnP-TW coils:
- PnP-TW20 (0.2ohm): to use between 40 and 55W
- PnP-TW15 (0.15ohm): to use between 55 and 70W
Compatible with all the PnP coils, you can choose between a multitude of coil values and vape experiences. You'll go from a tight vape in an indirect draw (MTL) to an airy vape in a direct draw (DL) in no time.
Its top airflow system will offer a serene vape avoiding e-liquid leaks.
The UFORCE-L clearomizer of Voopoo's Drag 4 kit
How to fill the tank?
To quickly fill it with e-liquid, the brand Voopoo opted for a system of top filling. You only have to:
- Unscrew the top cap
- Insert the thin cap of your bottle
- Fill it with e-liquid
- Close the top cap
N.B: If you use a new coil, wait for some minutes so it is correctly primed.
The filling of UFORCE-L clearomizer of Voopoo's Drag 4 kit
Box contents
- 1 Drag 4 mod
- 1 4ml UFORCE-L clearomizer
- 1 0.2ohm PnP-TW coil
- 1 0.15ohm PnP-TW coil
- 1 5.5ml Bulb Pyrex
- 1 USB-C cable
- 1 set of accessories
- 1 user guide
The Drag 4 kit is made by the brand Voopoo. It is delivered without batteries.
Box contents of Voopoo's Drag 4 kit
Diameter | 25.5mm |
---|---|
Maximum power | 177w |
Volume | 4 or 5.5ml |
Battery type | 18650 x2 |
Height | 147mm |
Material | Stainless steel and zinc |
Width | 52.4mm |
Depth | 25.5mm |
Mod type | Box |
Batteries included | No |
Weight | 242g |
Mod type | Electronic |
USB charging | Yes |
Chipset | Gene TT 2.0 |
Chipset version | Voopoo |
Compatible coils | PnP |
Compatible coils | 0.05 to 3 ohms |
Compatible coils | PnP-TW |
Temperature control | Yes |
Tank | Pyrex |
Fill type | From above |
Drip-tip | 810 |
Connector pin | 510 |
Configuration | Temperature Control / Variable Wattage |
Your comment cannot be sent
feedback Report a comment
Abuse report sent
Your report cannot be sent