Steam Crave Hadron Ragnar Combo Kit

Its XXL box and its velvet case are a good preview: Steam Crave offers the most beautiful of combos: the Hadron Ragnar kit.

Expert vape friends, here is the must-have of the High-End equipment. Composed of a Hadron 220W V1.5 mod and the Ragnar RDTA Advanced Kit aromamizer, this beautiful gem will please the vapers looking for power and big clouds.

Enjoy a hybrid atomizer that can hold your single-coil, dual-coil, and mesh builds. Its tank of 18ml or 25ml promises long sessions full of flavors and vapor.

The electronic mod takes the legendary and performing chipset Yihi X490 that you'll supply with dual battery 21700 (not included).

The Hadron Ragnar Combo kit by Steam Crave

A colossus with a tender heart

We're not gonna lie, with the Hadron Ragnar Combo kit, Steam Crave is not for the weak-hearted! With great dimensions of 157 x 48 x 38mm, this beautiful e-cig will make the happiness of enthusiasts of equipment matching power and sturdiness.

With its harmonious and refined lines, this kit has a design both chic and impressive. The rectangular structure of the Hadron mod reveals discreet roundness on the angles offering perfect handling.

On the main side of the electronic mod, you'll find from top to bottom:

• The Fire button
• The TFT color screen
• The setting buttons
• The recharging USB-C port

Handling of Steam Crave's Hadron Ragnar Combo kit

The Yihi SX490 chipset at the service of your vape

After inserting two 21700 batteries (not included) in the Hadron mod of your kit, you'll have access to the interface of your electronic mod through its nice color TFT screen.

The performing Yihi SX490 chipset will allow you to select the vape mode wished, among:

• Power mode: manually adjust the power delivered, from 5 to 220W
• TC/TCR mode: set the temperature according to the coil wire used in your Ragnar RDTA Advanced Kit aromamizer
• Joules mode: enjoy a temperature setting in joules

The Yihi SX490 chipset also lets you define a flavor mode (standard, soft, powerful, or powerful+), via the menu's advanced mode.

The TFT color screen of Steam Crave's Hadron Ragnar Combo kit

Monstrous capacity thanks to 21700 dual-battery power supply

So you don't lose any battery life, Steam Crave has equipped its Hadron Ragnar Combo kit with a slot for two 21700 batteries (not supplied), enabling you to enjoy long hours of monstrous performance from your electronic cigarette.

You insert your batteries into the dedicated trapdoor, located under the Hadron mod of your kit. And to make sure you never run out of battery, don't forget to bring pre-charged spare batteries!

Note that your kit comes with an adapter for 18650 batteries (not included).

The 21700 dual battery compartment of Steam Crave's Hadron Ragnar Combo kit

Did you forget your spare batteries? Steam Crave saves the day by equipping its kit with a USB-C recharging port, located just below the setting buttons. Just plug in the USB-C cable provided, and connect it to a modem router or computer.

However, we recommend you to use an external charger (not included) for your batteries whenever possible, for optimum safety and battery life.

The rechanging USB-C port of Steam Crave's Hadron Ragnar Combo

The Ragnar RDTA Advanced Kit aromamizer

This beautiful aromamizer has caught your eye for a long time now, but you don't know to which mod you should connect it? Steam Crave makes it easier by offering the aromamizer with the ideal electronic mod: the Hadron 220W V1.5.

You can make builds in single coil, dual coil, or even mesh, thanks to the three distinct decks included with the Hadron Ragnar Combo kit's box. Clearly meant for expert vapers, this atomizer has a tank of 18ml, or 25ml if you prefer one of the two spare Pyrex included. Note that you also can use the Ragnar RDTA in a dripper mode for an optimized tasting of your favorite e-liquids.

Ragnar RDTA's atomizer of Steam Crave's Hadron Ragnar Combo kit

A great versatility thanks to the 3 decks included

With a bottom-coil build system, the Hadron Ragnar Combo kit is delivered with not one but three decks!

According to your preferences, you'll match your Ragnar RDTA aromamizer to:

• A postless deck: allowing single or dual coil builds. Its large work surface can hold the most impressive builds. It presents two large wells meant for your cotton laces, and 4 screws meant for the fixation of your coil ends. You'll also see at the center small holes in a honeycomb structure allowing an optimum air circulation

The postless deck of Steam Crave's Hadron Ragnar Combo kit

• Velocity deck, with BF pin included: meant for your dual coil builds, it has two rectangular posts allowing you to make dual coil build for an airy vape. This deck can also hold the BF pin included for squonk enthusiasts! Note that your kit is delivered with two pre-made coils (Tri Core Fused Clapton Ni80) and a cotton lace.

The Velocity deck of Steam Crave's Hadron Ragnar Combo kit

• Deck for Mesh strips: get started in Mesh builds thanks to this deck and its small flavor strips! You'll find in the box a kit with two strips of Mesh so you can make your first build.

The Mesh deck of Steam Crave's Hadron Ragnar Combo kit

A customizable airflow

And since Steam Crave knows that expert vapers like to have a hand in adjusting air intakes, the manufacturer has equipped its Ragnar RDTA with a wide range of settings. On the lower part of the atomizer, you'll find a multitude of small air intake windows of different shapes and diameters.

Adjust the airflow as you wish, alternating between a rather tight draw on indirect inhaling (MTL) for optimum flavor rendering, and an ultra-airy draw on direct inhaling (DL) for massive vapor production.

Ragnar RDTA's air intakes on Steam Crave's Hadron Ragnar Combo kit

Two possible capacities: 18ml or 25ml!

Whichever tank you choose between the two included, you'll benefit in either case from a monstrous supply of e-liquid. In fact, whether you opt for the pre-assembled 18ml Pyrex, or install the 25ml conversion kit, you'll benefit from a phenomenal capacity.

To fill this gigantic tank, all you need to do is:

1. Unscrew the top cap of the Ragnar RDTA aromamizer
2. Insert the tip of your bottle into one of the two large filling holes
3. Pour in your e-liquid (Caution: never pour anything into the central chimney)
4. Carefully screw the top cap back on

The top filling of the Ragnar RDTA on Steam Crave's Hadron Ragnar Combo kit

Contents of the box

• 1 Hadron 220W V1.5 mod
• 1 Ragnar RDTA Advanced Kit aromamizer
• 1 chamber reducer
• 1 Postless deck
• 1 Mesh deck
• 1 Velocity deck
• 1 25ml Pyrex tank
• 1 USB-C recharging cable
• 1 18650 dual adaptor
• 1 vape band
• 1 screwdriver
• 2 Coils Tri Cored Clapton Ni80 26*3 +36 / 3mm / 0.2ohm
• 1 cotton lace
• 2 mesh strips
• 1 BF pin
• 1 user guide

The Hadron Ragnar Combo kit is made by Steam Crave. Warning, it is delivered without batteries.

Contents of the box of Stream Crave's Hadron Ragnar Combo kit