Vaporesso Luxe II Kit

The giant Vaporesso is committed to meeting the needs and expectations of vapers as perfectly as possible. After the success of the 220W Luxe mod, this manufacturer is back with a complete kit featuring the 220W Luxe II mod and the NRG-S clearomizer!

Building on the experience of its predecessor, the Luxe II mod will amaze you with its revisited curves, finishes, and functions thanks to the Axon chipset!

To fight alongside it, you'll find the NRG-S clearomizer, 25 mm in diameter. Innovative and imposing, this colossus can hold up to 8ml of your e-liquids!

Vaporesso will include a complete, ready-to-use kit, with a pre-installed 0.18ohm GT Mesh coil and a 0.15ohm GT4 Meshed coil.

An electronic mod

Measuring 89.9 mm high, 47.8 mm wide, and 29.5 mm depth, the Luxe II mod may be imposing, but it's compact and lightweight!

Made from sturdy materials, this electronic mod will fit perfectly in your hand for a pleasantly smooth feel to the touch. For a responsive and ergonomic vape, you'll find a large switch, ideally located on the front of your mod.

And, to add a touch of charm, Vaporesso has added IML prints to its side. Melt in front of its magnificent landscapes and characters worthy of the finest science-fiction universes!

Vaporesso's Luxe II mod

A chipset by Vaporesso!

To guarantee difficult vape possibilities, Vaporesso selected the Axon chipset. It will give a maximum power of 220 watts to your Luxe II mod. You can choose between several vape modes:

• The Pulse mode, being the standard mode, for a reactive and powerful vape
• The Power Eco mode will preserve the capacity of your batteries and will take over from the Pulse mode when your batteries have a lower capacity of 40%
• The Smart TC mode, meant for vapers introduced to temperature control with the usual wires (Ni, Ti, SS)
• The DIY mode takes all the possibilities given to the OMNI Board chipset of the Luxe mod and lets you make your settings manually

To go through these features, Vaporesso added a 2" TFT color screen and three touch-sensitive buttons.

The screen of Vaporesso's Luxe II mod

A big capacity and a fast recharge

To make your nice Luxe II kit by Vaporesso work, you'll need two 18650 batteries (not included). And, thanks to a compartment protected by a magnetic door on the side of your mod, you'll have easy access to your two 18650 batteries!

The Vaporesso giant has also thought of the little oversights and emergencies by equipping your Luxe II mod with a USB port. Using the USB cable included with your kit, you can connect your electronic mod directly to a computer.

To maximize battery life, we recommend using a dedicated external charger (not included).

The dual battery compartment of Vaporesso's Luxe II mod

The NRG-S, a clearomizer for all vapers

To enhance its Luxe II mod, Vaporesso selected an 8ml clearomizer with a top filling, a large adjustable airflow, and a 510 drip-tip for more vapor!

With a 25mm diameter, this clearomizer will perfectly go with the dimensions of the Luxe II mod.

With the Luxe II kit by Vaporesso, the vapor whirls will match all vape experiences, even the beginners!

The NRG-S clearomizer of Vaporesso's Luxe II kit

Mesh coils for a DL vape

To guarantee a DL experience, your clearomizer will be compatible with all GT Cores coils manufactured by Vaporesso.

Made from Kanthal, these coils offer vapor production, not to mention flavor reproduction.

Included in your Luxe II mod kit are two GT and GT4 Mesh coils, 0.18 ohm and 0.15 ohm.

• The pre-installed 0.18 ohm GT Mesh coil will enable you to vape between 50 and 85 watts. You'll get a stable sensation of heat and an explosion of flavors!
• The 0.15 ohm GT4 Meshed coil will enable you to vape between 50 and 75 watts. It will provide you with a more abundant vapor while ensuring an intensely pleasant rendering of flavors.

When it's time to change your coil, simply unscrew the bottom part of your NRG-S clearomizer, grab the coil, and pull it out! Don't forget to prime your new GT resistor with a few drops of e-liquid on its cotton before using your NRG-S!

The coils for the NRG-S clearomizer of Vaporesso's Luxe II kit

A large airflow for a maximum of vapor!

The cloud-chasers will not be disappointed! The NRG-S clearomizer promises unforgettable vape sessions thanks to its airflow system.

Easily adjustable, you only have to turn the notch located before the Pyrex of your NRG-S.

The air intakes of Vaporesso's NRG-S clearomizer

An 8ml capacity

So you're not constantly bothered by refilling during your direct inhaling experience, Vaporesso has selected a clearomizer with an 8ml Pyrex bubble tank! With this XXL capacity, you'll be able to make voluminous clouds without worrying about the remaining e-liquid!

To make filling even more handy, simply push the base of your NRG-S drip tip backward. Your top cap will then open a quarter-turn. From there, you'll have access to a small opening where you can charge your tank with your e-liquid!

The filling system of Vaporesso's NRG-S clearomizer

Box contents of Luxe II kit

• A 220W Luxe II mod
• An 8ml NRG-S clearomizer
• A 0.18ohm GT coil in Mesh (pre-installed)
• A 0.15ohm GT4 coil in Mesh
• A spare 5ml Pyrex
• A pack of spare washers
• A USB cable
• A user guide

The 220W Luxe II kit is made by Vaporesso.

Box contents of Vaporesso's Luxe II kit