Hellvape TLC Clearomiser
A beautiful sub-ohm clearomiser of either 5 or 6.5ml !
-
Diameter25.4mm
-
Volume5 or 6.5ml
-
Height55.1mm
-
Brand
Prepare yourself for your next cloud-chasing session and discover all the great features of Hellvape’s TLC clearomiser !
Hellvape’s TLC clearomiser is a real beast that’s designed to be used at full power, around 60 or 70 watts, to produce huge clouds of vapour !
This sub-ohm clearomiser comes with its fair share of surprises ! It is fitted with an 810 drip tip that not only acts as a mouthpiece, it also allows you to access your coil. There are 2 quality Mesh coils included in the kit, along with two Pyrex tanks of 5ml and 6.5ml, respectively.
Seeing as it measures 25.4mm wide at its base and 28mm wide around the airflow ring, you’ll have to use it with your biggest mods !
Hellvape’s TLC clearomiser with Smok’s Mag 18 mod
A generous clearomiser with a simple aesthetic
The TLC clearomiser is made from stainless steel, giving it a classic but timeless look. However, it does have a bit of a flared shape on its upper and lower parts.
The TLC Tank is precisely 25.4mm wide at its 510 pin and increases to 28mm at its airflow ring. We recommend you use mods that can accommodate such a large diameter.
Hellvape’s TLC clearomiser
Compatible with the T7 and W8 coils
In order to provide you with plenty of thick vapour, without losing any taste, Hellvape’s TLC clearomiser comes with two of the manufacturer's T7 coils:
- One T7-01 Mesh coil of 0.15 ohm, made from KA1, to be used between 60 and 70 watts
- One T7-02 Mesh coil of 0.2 ohm, made from KA1, to be used between 50 and 60 watts
If you prefer the coils of the famous Launcher Tank, you’ll be glad to know that the TLC clearomiser is also compatible with Wirice’s W8 coils !
Your coil will need replacing after about 2 or 3 weeks’ use. To install or replace it, you will need to :
- Remove the drip tip (which is the mouthpiece)
- Take out the old coil if there is one, then throw it away
- Insert the new coil, previously soaking it with a few drops of e-liquid
- Put the drip tip back on the tank
Adjustable air intakes
Like most clearomisers, Hellvape’s TLC clearomiser has its air intakes on its lower part, just beneath the glass tank.
These beautiful airflow holes can be adjusted with ease. All you have to do is turn the bottom ring !
If you prefer an airy draw with a direct inhale (DTL), leave these holes open. If you prefer a tighter draw with a restrictive direct inhale (RDL), close them a bit.
The air intakes of Hellvape’s TLC clearomiser
5 or 6.5ml of e-liquid in the top-fill tank
With Hellvape’s TLC clearomiser, you can either use a 5ml straight Pyrex tank or the 6.5ml round tank that comes in the kit.
Thanks to this generous e-liquid capacity, you won’t have to fill your TLC clearomiser all the time. Don’t wait until the coil is no longer immersed in e-liquid before filling up, though !
To fill the tank, proceed as follows:
- Turn the top cap a quarter turn, then lift it up
- Insert the tip of your bottle of e-liquid into one of the two holes
- Fill up with liquid, but never to the brim
- Close the top cap
- Wait 5 to 10 minutes for the coil to prime itself and soak up enough liquid
The top-fill system of Hellvape’s TLC clearomiser
Contents
- The TLC clearomiser equipped with the 5ml tank
- One T7-01 Mesh coil of 0.15 ohm
- One T7-02 Mesh coil of 0.2 ohm
- One spare Pyrex tank of 6.5ml (bubble shaped)
- A set of spare parts
- A user guide
The TLC clearomiser is manufactured by Hellvape.
Contents of the box of Hellvape’s TLC clearomiser kit
Diameter | 25.4mm |
---|---|
Volume | 5 or 6.5ml |
Height | 55.1mm |
Material | Stainless steel |
Weight | 63g |
Compatible coils | TLC Coil |
Compatible coils | Wirice |
Tank | Pyrex |
Fill type | From above |
Drip-tip | 810 |
Connector pin | 510 |