Uwell Caliburn G2 Cartridge (x2)

Do you need to replace or double your cartridge stock on the Caliburn G2 podmod? Now it's a done deal with this set of two empty cartridges by Uwell!

Perfectly identical, you'll benefit from the same 2ml capacity, a clean and easy top-filling system, and an intuitive airflow adjustment, directly accessible under the cartridge.

Without forgetting their compatibility! These PCTG tanks can receive a Uwell cartridge panel.

The Caliburn G2 cartridge by Uwell, sold in sets of 2

Spare cartridge Caliburn G2 podmod, set of 2

Identical to the ones supplied with your Caliburn G2 podmod by Uwell, these two cartridges prevent breakage or spillage but are also very suitable for all vapers wishing to alternate between several flavors.

With a 2ml capacity, their PCTG tank is robust. Sold without coils, they will still be compatible with several of the manufacturer's ranges.

Placing them on the base of your Caliburn G2 built-in battery is easy! Their magnetic system allows them to be placed naturally on the base. It's impossible to place them upside down!

The magnetic system of the Caliburn G2 cartridges by Uwell

Compatible tanks with several coils

The Caliburn G2 cartridges by Uwell are compatible with several of the manufacturer's coils (sold separately):

• UN2 Meshed-H
• Caliburn G Mesh

You can change your coil when you want. But be careful, your tank must be empty of e-liquid!

Whether it's to change e-liquid because you feel an unpleasant taste of burning in the throat, or you feel that your coil is running out of steam, you will proceed as follows:

1. Remove the Caliburn G2 cartridge from the magnetic base of your pod
2. Turn it over and remove the old coil
3. Take a new coil and imbibe its cotton with some e-liquid drops
4. Push the new coil into the tank center, using the detents
5. Proceed to the tank filling

An accessible airflow system under the cartridge

Very ingenious, the Caliburn G2 cartridges permit a simple and quick airflow adjustment.

Under your cartridge, you will find a small colored gear. By turning it, you will play with your airflow, reducing or increasing your draw for a tighter (MTL) or more airy feel (RDL).

The airflow system of the Caliburn G2 cartridges by Uwell

2ml easy-to-fill tanks

Like most cartridges, Caliburn G2 is made of PCTG. This plastic material is robust and durable and doesn't disturb the authenticity of the flavors of your e-liquids.

With a 2ml capacity, the e-liquid autonomy is assured.

As for filling, it's very simple, through the top of the cartridge.

You will need to refill your tank as soon as your coil is no longer properly immersed:

1. Remove the drip-tip from the top of the cartridge
2. Insert the tip of your bottle into the dedicated orifice, easily identifiable thanks to its red color
3. Recharge your tank in e-liquid (never to the brim)
4. Wait for about 10 minutes in order for your coil to soak enough and be properly primed

N.B: Never pour liquid into the central orifice.

The filling system of the Caliburn G2 cartridges by Uwell

The Caliburn G2 cartridges for Caliburn G2 podmods are made by Uwell and sold in sets of 2.