PURE 200ml Mix&Go Base DIY Pack

Do you wish to start DIYing, but you don't know where to start?

Here is for you the Mix&Go Base DIY Pack by PURE, containing everything you need to make 200 ml of homemade e-liquid in 50PG/50VG.

Remember to purchase a flavor concentrate (not included) in the flavor of your choice.

Its advantage? A steep accelerator that reduces the maturation time to just a few hours!

Nicotine rate of your choice

The 200ml Mix&Go Base DIY Pack enables you to make your own nicotine base, necessary for the preparation of your e-liquid in DIY (Do It Yourself).

The PURE brand offers it at three different nicotine rates, to select at the order.

If you choose the 200ml Mix&Go Base DIY Pack in 1.5mg/ml of nicotine, you'll receive:

• 1 200ml bottle filled with 180ml of 50PG/50VG base
• 1 10ml booster in 10mg/ml of nicotine
• 1 10ml booster in 20mg/ml of nicotine

If you choose the 200ml Mix&Go Base DIY Pack in 3mg/ml of nicotine, you'll receive:

• 1 200ml bottle filled with 170ml of 50PG/50VG base
• 3 10ml boosters in 20mg/ml of nicotine

If you choose the 200ml Mix&Go Base DIY Pack in 6mg/ml of nicotine, you'll receive:

• 1 200ml bottle filled with 140ml of 50PG/50VG base
• 6 10ml booster in 20mg/ml of nicotine

A steep accelerator

Don't have time to wait to vape your homemade e-liquid?

With the base included in your pack, there's no need to wait a long time for your mixture to mature after preparation.

It includes a steep accelerator, allowing you to use your DIY e-liquid after just a few hours of rest!

This is possible thanks to the innovation of the engineers at Chemnovatic laboratories, part of the PURE brand.

How to use your Mix&Go Base DIY pack?

Follow the steps below to easily and quickly make 200ml of nicotine base:

1. Remove the cap from your base bottle
2. Pour all of the nicotine boosters included in the pack into the bottle
3. Screw the cap back onto the bottle
4. Shake

As a reminder, your 200ml base bottle is not completely filled in order to leave space for adding nicotine boosters. This space is calculated so that you obtain a total volume of 200 ml of nicotine base.

Then get an empty bottle to finish preparing your DIY e-liquid. Pour your nicotine base and flavor concentrate (not included) into this bottle, following the manufacturer's recommended dosage. Let the preparation sit in a dry place away from direct sunlight.

The 200ml Mix&Go Base DIY Pack is made by PURE.

Which nicotine rate should you choose? 

The nicotine rate choice depends on your smoking profile and the electronic cigarette used:

• 3mg/ml for an occasional smoker (fewer than 5 cigarettes per day)
• 3 to 6mg/ml for a moderated smoker (between 5 and 15 cigarettes per day)
• 8 to 12mg/ml for a regular smoker (between 15 and 25 cigarettes per day)
• 14 to 18mg/ml for a tireless smoker (more than 25 cigarettes per day)

If you use a more performing electronic cigarette with coils below 1ohm and for a high power of 30 watts, we recommend using a lower nicotine rate.

Conservation of your e-liquid

For optimal conservation, we recommend storing your bottle in a dark and dry place away from the light.

After repeated exposure to air and light, the e-liquid color can darken. This color change doesn’t affect the quality or the taste of your e-liquid.

The date indicated on the label is a BBD (Best Before Date) or DDM (Date of Minimum Durability). Past this date, the e-liquid can still be used.