Vapefly Alberich II MTL RTA Atomiser

A&L presents you the Alberich II MTL RTA single-coil atomizer from Vapefly in an unboxing video!

Vapefly is back with a vengeance on the rebuildable market, offering us an atomiser dedicated to rather tight draws in indirect inhalation (MTL), or even restrictive direct inhale (DTL).

Equipped with a deck for single coil build, the Alberich II MTL RTA is included with 6 airflow pins, and features a beautiful Pyrex tank with an e-liquid capacity of 4ml, fillable from the top. And to top it all off, the sleek, streamlined look of this beautiful atomiser will add a remarkable touch of elegance to all your boxes and mods that accept a 23mm diameter.

Vapefly's Alberich II MTL RTA atomiser on Geek Vape's Aegis Max 2 mod

A sleek, refined look

Those nostalgic for MTL (indirect inhale) vape will undoubtedly be won over by the old school look of this atomiser, with its stretched dimensions of 59.6mm high and 23mm wide. Its handy top cap is topped by an interchangeable 510 drip tip, with a rather elongated, flared design (height 15mm).

The straight Pyrex tank contributes to the sober, elegant look of the Alberich II MTL RTA, and offers a generous 4ml e-liquid capacity. You'll also find a second replacement Pyrex in the box with your atomiser.

Vapefly's Alberich II MTL RTA atomiser

A single-coil deck

Specially designed and created by Vapefly for your tight draw in MTL (indirect inhalation) or DTL (restrictive direct inhale), the Alberich II has a bottom coil type deck, designed for your best single coil builds.

This deck includes two screws with a pin for locking the wire (single or complex), as well as side spaces ready to receive your cotton. You'll also appreciate the notch on the edge of the deck for your build guide.

The single-coil deck of Vapefly's Alberich II MTL RTA atomiser

A top airflow combined with 6 air pins

Renowned for its leakproof and anti-condensation properties, your atomiser features a clever top airflow system. Vapefly combines this top airflow system with the use of air pins, allowing you to precisely adjust the air intake rate on your coil.

The result? An MTL draw with exceptional taste!

The Alberich II MTL RTA Atomiser is included with 6 airflow pins, ranging from 0.8 to 2.0mm. Note that by default the 1.2mm pin is pre-installed in the atomiser.

The 6 airflow pins of Vapefly's Alberich II MTL RTA atomiser

A 4ml Pyrex tank

The Alberich II MTL RTA has a straight tank with an e-liquid capacity of 4ml. This capacity is all the more generous given that e-liquid consumption in MTL draws remains reasonable, giving you a comfortable vape capacity.

As a reminder, a spare Pyrex is included in the box with your atomiser, with the same straight shape and identical 4ml capacity.

A fast and clean top-fill

When the time comes to charge your e-liquid tank, there's no need to remove the atomiser from its box or mod. Simply take your favourite e-liquid and :

1. Unscrew the top cap a quarter turn to remove it.
2. Insert the tip of your bottle into one of the two bean-shaped filling holes (be careful, never pour anything down the central chimney).
3. Pour your e-liquid up to three quarters of the way into the tank
4. Put the top cap back on with the help of the notches.

Filling the 4ml tank of Vapefly's Alberich II MTL RTA atomiser

Contents

• The Alberich II MTL RTA atomiser
• A spare straight Pyrex tank of 4ml
• One KA1 coil of 1.0ohm
• One Ni80 coil of 1.0ohm
• Two laces of Firebolt cotton
• 6 Airflow pins
• A set of spare parts
• A screwdriver
• A user guide

The Alberich II MTL RTA atomiser is manufactured by Vapefly.

The contents of Vapefly's Alberich II MTL RTA atomiser kit