Smok Nord 6 Podmod

The Smok brand is expanding its Nord collection with the 6: a high-performance, user-friendly podmod system, particularly suited for those who prefer an airy draw.

Rechargeable via USB-C, this kit features a built-in 3,800mAh battery and delivers a maximum power output of 80W.

Along with the podmod, you’ll also receive two empty cartridges in different formats: a Dual Core Dual Meshed 0.4ohm sealed coil cartridge (pre-installed) with side filling, and an RPM 4 Meshed 0.15ohm removable coil cartridge with top filling.

Thanks to these, you can choose between a semi-airy (RDL) or airy (DL) draw.

For your convenience, the Nord 6 also features a 1.65-inch HDI touchscreen, a Fire button, adjustable airflow, and a slide-lock switch.

Smok's Nord 6 podmod

A design true to the Nord series

The Nord 6 kit retains the traditional rounded lines of the Nord series, measuring 116.9 x 36.7 x 24.6 mm and weighing 135 g.

This compact size makes it easy to slip into your pocket or bag for everyday use.

The front features a 1.65-inch HD color touchscreen, allowing you to navigate between different settings: power, vape mode, and puff tracking.

You’ll also find on the podmod:

• A Fire button
• An adjustable airflow control on the side
• A switch lock button, allowing you to lock the podmod while on the go
• A USB-C port

Handling of Smok's Nord 6 podmod

A magnetic connection

Like its predecessors, the Nord 6 once again features a magnetic connection between the cartridge and the podmod, ensuring a reliable and secure fit for everyday use.

The magnetic connection of Smok's Nord 6 podmod

3 vaping modes available

Smok has equipped its Nord 6 podmod with a 1.65-inch color touchscreen.

At a glance, you can see the wattage, the selected vaping mode, the value of the installed coil, and the remaining battery level.

To turn your podmod on or off, simply press the Fire button 5 times in a row.

To manually adjust the power of your podmod, slide your finger from top to bottom of the touchscreen, then push on "ADJUST POWER". Once it is made, still with your finger, slide the power values, then choose the one suiting you by pressing the Fire button to confirm.

In addition, this kit offers 3 vape modes, accessible via the touchscreen:

• Normal Mode: the podmod delivers stable, constant power throughout the draw
• Smooth Mode: power gradually increases to its peak, then gently decreases at the end of the draw
• Boost Mode: maximum power is delivered from the start of the draw before stabilizing

Four display themes are also available to customize the interface.

The touchscreen of Smok's Nord 6 podmod

3,800mAh of capacity

Inside this podmod, you'll find a built-in battery with a capacity of 3,800mAh.

When the battery level displayed on the touchscreen gets low, use the USB-C cable included in the box and plug it into the USB-C port on your podmod, then connect it to an external power source (wall outlet, computer, power bank).

Compatible with 3A fast charging, the Nord 6 recharges quickly in just a few minutes.

The USB-C port of Smok's Nord 6 podmod

Two 5ml cartridges

With the Nord 6 podmod, Smok includes two types of cartridges, each featuring a different filling system and coil type, for a personalized vaping experience.

With a capacity of 5ml each and made of transparent material, you can easily check the remaining e-liquid level in the tank.

The two cartridges of Smok's Nord 6 podmod

The Dual Core Dual Meshed 0.4ohm coil (Side-fill)

The first cartridge included with your Nord 6 podmod is a Side-Fill cartridge with a sealed Dual Core Dual Meshed 0.4ohm coil, pre-installed in the podmod.

It is designed for restricted direct inhaling (RDL) or direct vaping (DL), between 16 and 40W.

Since the coil is built into the cartridge, you don’t need to replace it manually. As soon as you notice a slight burnt taste or a loss of flavor, simply replace the entire cartridge with a new one.

Its side-fill system (Side-Fill) allows you to refill without having to remove the cartridge from the podmod.

Here are the steps to follow to refill it:

1. Gently lift the silicone tab located on the side of the cartridge
2. Insert the tip of your e-liquid bottle into the designated opening
3. Fill the tank
4. Close the silicone tab

The filling system of the Side Fill cartridge of Smok's Nord 6 podmod

The RPM 4 Meshed 0.15ohm cartridge (Top Fill)

The second cartridge included is a Top-Fill cartridge with a removable RPM 4 Meshed 0.15ohm coil, designed for an airy draw (DL) between 30 and 60W.

It is compatible with the entire range of RPM 4 coils from Smok (sold separately).

As soon as you notice a slight burnt taste or a loss of flavor, it’s time to replace your coil.

It’s easy—just follow the guide below:

1. Detach the cartridge from the podmod
2. Gently pull out the used coil
3. Soak the new coil with a few drops of e-liquid
4. Insert the new coil in place of the old one
5. Clip the cartridge back onto the podmod
6. Fill your tank
7. Wait a few minutes for the coil to prime
8. Vape away!

And if your tank is empty, here’s what you need to do:

1. Remove the mouthpiece to access the fill port
2. Insert the narrow tip of your e-liquid bottle
3. Fill the tank
4. Replace the mouthpiece

The filling system of the Top-Fill cartridge of Smok's Nord 6 podmod

An adjustable airflow

Smok provides an airflow control located on the side of the podmod, allowing you to adjust the draw to suit your needs.

As a reminder: the more you open the airflow, the more open the draw becomes. Conversely, the more you close it, the tighter the draw becomes, allowing you to switch from a restrictive direct (RDL) draw to a more open direct (DL) draw.

The airflow of Smok's Nord 6 podmod

Box contents

• 1 3,800mAh Smok Nord 6 podmod
• 1 empty Side-Fill cartridge with sealed Dual Core Dual Meshed 0.4ohm coil (pre-installed)
• 1 empty Top-Fill cartridge
• 1 RPM 4 Meshed 0.15ohm coil (pre-installed in the Top-Fill cartridge)
• 1 USB-C cable
• 1 user guide

The Nord 6 podmod is made by Smok.

Box contents of Smok's Nord 6 podmod