Aspire Fluffi Pro Podmod

A&L reveals the Fluffi Pro podmod and its removable protective cap in this unboxing video!

Are you looking for a compact and easy-to-use podmod? Aspire offers the Fluffi Pro, made to work intuitively with the main functions of an e-cigarette.

Rechargeable via USB-C, this model features a 2,800 mAh built-in battery and delivers up to 40W of power.

The podmod is also equipped with a 1.47" TFT screen and a unique button enabling you to set the power or browse between 3 ignition modes.

It is delivered with two Fluffi cartridges with a 3.5ml capacity, with Dual Mesh sealed coils (0.4ohm and 0.6ohm). Thanks to them and the airflow setting, you can vape in semi-direct inhaling (RDL) or indirect inhaling (MTL).

Your cartridge can be covered thanks to a removable cap. Very handy, the latter protects your tank from possible shocks and reduces contact with dust and dirt during transport.

Aspire's Fluffi Pro podmod

The design of the Fluffi Pro podmod

With rounded lines, its compact dimensions of 108x33x23.5mm and a lightweight of only 86g, the Fluffi Pro podmod is agreeable in hand and is easily slid in your pocket or bag.

Its particularity? You'll get a removable cap meant for your cartridge to protect it.

The main side has a 1.47" TFT color screen with a unique setting button.

Regarding the lateral sides of the podmod, they are equipped with a USB-C port and an adjustable airflow.

Handling of Aspire's Fluffi Pro podmod

A handy magnetic connection

Aspire equips its Fluffi Pro podmod with a reliable magnetic connection, keeping the cartridge on the base.

To take it out, it's really simple: you only have to take the cap off and to pull on the cartridge to take it out of the podmod.

The magnetic connection between Aspire's cartridge and the Fluffi Pro podmod

3 easy-to-use setting modes

Thanks to its ASP chipset, Aspire's Fluffi Pro podmod was made to be simple from the first use.

Indeed, its unique multi-function button enables setting it all without a complex menu. Before accessing it, you only have to turn the podmod on. For this, you only have to press this button five times. Repeat the same process to turn it off.

Once your podmod is turned on, here is what you can customize from the button:

• 2 pushes: enables the change of ignition mode to vape among 3 options available (A, B, or AB)
• 3 pushes: set the power in intervals of 0.5 watts
• 4 pushes: reset the puff counter to zero

Regarding the vaping modes, you'll have the choice:

• The A mode (automatic): you only have to inhale through the mouthpiece to vape it
• The B mode (manual): the ignition is made by pressing the button for each puff
• The AB mode: your podmod accepts both automatic and manual ignition

Please note that the Fluffi Pro automatically detects the built-in coil of the cartridge and adjusts the power accordingly.

The screen indicated from top to bottom:

• The vaping mode activated
• The power in watts
• Indications on the coil installed
• The level of charge left in the battery

The 1.47" color screen of Aspire's Fluffi Pro podmod

A 2,800mAh battery

Rechargeable in USB-C, Aspire equips your podmod with a built-in battery with 2,800mAh capacity. When your screen indicates a low battery level, you'll have to recharge it.

To do this, you only need to connect the USB-C cable (included) to the port, located on the side, then connect it to a wall socket, computer, or external battery.

Very handy, your device is compatible with the quick 2A recharge system to recharge it in only a few minutes.

The USB-C port of Aspire's Fluffi Pro podmod

A pack of two Fluffi cartridges

Your Fluffi podmod equips a cartridge with a 3.5ml capacity. Laterally fillable, you'll also have a small notch on the magnetic cap to know the level of e-liquid left inside the tank.

The cartridge is equipped with a sealed coil: you don't have to replace the latter when it is used; you have to throw the cartridge out entirely.

Aspire also includes two cartridges with different coil values: Dual Mesh 0.4ohm and 0.6ohm.

The cartridge of Aspire's Fluffi Pro podmod

A built-in coil in your cartridge

The motto of Fluffi Pro? Simplicity. Forget about the tedious task of changing a heating element: it is sealed.

Indeed, when you feel a disagreeable aftertaste or a flavor alteration, you only have to replace the whole cartridge. Throw out the used one and install a new one!

Aspire provides two cartridges with Dual Mesh sealed coils with distinct values to offer a versatile draw:

• A cartridge with Dual Mesh 0.4ohm sealed coil (pre-installed): enables an airier draw in semi-direct inhaling (RDL) between 30 and 40 watts
• A cartridge with Dual Mesh 0.6ohm sealed coil: offers a tighter draw (MTL) between 17 and 24 watts

An adjustable airflow system

Located on the side of the podmod, you'll have a sliding button to set the airflow according to your needs.

Open this airflow if you wish to get an airier vape, or close it for a tighter draw and focus on flavor rendering.

The airflow of Aspire's Fluffi Pro podmod

The filling of your Fluffi cartridge

When the level of e-liquid isn't enough in your tank, it's time to refill it.

Aspire chose a lateral filling system.

To do this, you only have to:

1. Take the magnetic cap out
2. Lift the silicone tab located on the cartridge's side
3. Put the bottle cap into the hole
4. Fill the 3.5ml tank
5. Put the silicone tab back on
6. Put the cap back on

Warning: if you use a new cartridge, let it sit for a few minutes so the coil is correctly primed with e-liquid before using it for the first time.

Filling the cartridge of Aspire's Fluffi Pro podmod

Box contents

• 1 2,800mAh Fluffi Pro podmod
• 1 pre-installed 0.4ohm Fluffi cartridge
• 1 0.6ohm Fluffi cartridge
• 1 USB-C cable
• 1 user guide

The Fluffi Pro podmod is made by Aspire.

Box contents of Aspire's Fluffi Pro podmod