Voopoo Argus Klyc Podmod

Discover the Argus Klyc podmod in this video: Light, handy, and 100% automatic!

Voopoo is expanding its Argus collection with the introduction of the Argus Klyc podmod.

No settings are required, as it intelligently adjusts its power (5 to 30W) according to the coil installed and activates automatically when you inhale through the mouthpiece (auto-draw system). Its ease of use and tight draw (MTL) make it an e-cigarette suitable for beginner and intermediate vapers.

In addition, the podmod comes with a magnetic cap to protect the drip tip, a handy solution that protects it from dirt and dust when you're on the go.

Included with an Argus Top-Fill V2 cartridge, this podmod is compatible with the entire Argus Top-Fill collection.

Rechargeable via USB-C, you get a built-in battery with a capacity of 1,350 mAh.

Voopoo's Argus Klyc podmod

The design of the Argus Klyc podmod

The manufacturer Voopoo chose a long and rectangular format for its Argus Klyc podmod. Thanks to its dimensions of 100.6x29.7x17.2mm and its light weight of 70g, you'll have a compact kit with good handling.

Its aluminum alloy body features two indicators:

• An LED to show the battery capacity
• A bright RGB bar in the form of a colored gauge to indicate the power level

To charge the battery and adjust the draw, there is a USB-C port and a sliding airflow switch.

Handling of Voopoo's Argus Klyc podmod

For optimal hygiene, the podmod has a magnetic cap. The latter protects the mouthpiece from shocks and dust when you're on the go (dust-proof, light-proof, antibacterial, anti-oxidation, and anti-volatile). The magnetic fixing of the protection cap is sure and stable.

Handy: it can be clipped under the device, avoiding losing it when you're vaping.

The protection cap for the mouthpiece of Voopoo's Argus Klyc podmod

A magnetic connection system

Voopoo also included a magnetic connection system between the cartridge and the podmod.

Thanks to this fixation, you can quickly go from one tank to the other to vary the e-liquids according to your needs.

The magnetic connection between the Voopoo's Argus Top-Fill V2 cartridge and Argus Klyc podmod

An intuitive functioning

With no settings or switches, the Argus Klyc podmod is designed to be as simple as possible for beginner and intermediate vapers.

To use it, simply inhale through the mouthpiece. Moreover, the power is automatically adjusted according to the coil used and the strength of your draw, thanks to its GENE AI 2.0 chipset, which uses 'Draw-Strength Adaptive Power' technology.

In practical terms, the pod detects the strength of your draw and adjusts the output to one of three levels (low, medium, high). The bright side bar lets you know: the more intense the color, the higher the power output.

In terms of safety, the chipset also protects the podmod against: excessive suction, short circuits, low battery, overcharging, overheating, and overcurrent.

The power indicator with the RVB light of Voopoo's Argus Klyc podmod

A built-in battery rechargeable via USB-C

With a 1,350mAh battery, the Argus Klyc podmod can go all day long.

On the side of the podmod, you'll get a luminous indicator to evaluate the level of charge left:

• White LED: the capacity left is enough
• Red LED: the battery is low and has to be recharged

Is the light red? Use the USB-C cable included, plug it into the dedicated port on the device, then connect it to a computer USB port or wall outlet (not included) to charge the podmod.

The USB-C port of Voopoo's Argus Klyc podmod

The Argus Top-Fill V2 cartridge

In addition to upgrading its Argus collection, Voopoo has also chosen to innovate with its Argus Top-Fill cartridges. This podmod comes with an Argus Top-Fill V2 cartridge in 3ml and 0.7ohm (14 to 18W). You get a tight MTL draw suited for nicotine and nicotine salt e-liquids.

This version 2 incorporates iCOSM 2.0 technology: 30 days of performance, a leakproof system, and optimal flavors for 100ml of use.

Moreover, if the sealed coil in your cartridge shows signs of wear (loss of flavor, slight burning taste, etc.), simply change the entire cartridge.

For this:

1. Remove the cartridge with the used coil of the magnetic base
2. Take a new Argus Top-Fill cartridge
3. Fill the e-liquid tank
4. Wait for 5 to 10 minutes for the new coil to get soaked with e-liquid

Voopoo's Argus Top-Fill V2 cartridge

An adjustable airflow

Voopoo provides a sliding airflow switch on the side of your podmod, allowing you to adjust the draw to your preference.

You can choose between a more airy vape by opening the flap or a tighter vape by closing it.

The airflow sliding button of Voopoo's Argus Klyc podmod

The filling of a 3ml tank

Simple and quick, the recharging in e-liquid of the cartridge is made from the top.

A filling system avoids taking the cartridge off the magnetic base.

To fill it, you only have to:

1. Lift the silicone strip located on your cartridge
2. Insert the e-liquid bottle tip into the filling hole
3. Press the bottle to fill the tank
4. Close the silicone strip

If it's the first time you're filling the cartridge's tank, wait for ten minutes so the new coil is correctly primed.

The cartridge's filling of Voopoo's Argus Klyc podmod

Box contents

• 1 1,350mAh Argus Klyc podmod
• 1 3ml Argus Top-Fill V2 cartridge in 0.7ohm
• 1 USB-C cable
• 1 user guide

The Argus Klyc podmod is made by Voopoo.

Box contents of Voopoo's Argus Klyc podmod