Lost Vape Ursa Cap Pro Podmod

The manufacturer Lost Vape completes its Ursa collection by presenting the Ursa Cap Pro podmod.

This kit with a 35W maximum power offers a versatile vape experience: a tight draw in MTL or a slightly airy draw in RDL. The podmod is compatible with the generation of Ursa cartridges, including the V2, you'll have a large vaping choice.

It includes a protection cap for the mouthpiece.

Equipped with a 1,200mAh built-in battery, this podmod is capable of accompanying you during long hours, according to the level of use.

Inside the box, find the podmod, a Ursa V3 cartridge with 0.8ohm sealed coil, and a lanyard to transport it everywhere.

Lost Vape's Ursa Cap Pro podmod

The design of Ursa Cap Pro

Lost Vape remains faithful to the design of its Ursa range with a lightweight podmod in an elongated format (104x32x21mm and 70g).

The kit includes a strap that attaches to the mounting system, allowing you to keep your pod close at hand.

Made from aluminum alloy, the pod has a 0.69" OLED screen displaying essential information such as wattage, battery charge level, and number of puffs.

The Ursa Cap Pro pod has a fire switch for settings (power management, on/off), an airflow switch, and a USB-C port.

Handling of Lost Vape's Ursa Cap Pro podmod

The Ursa Cap Pro podmod is also equipped with a protection cap specially made for the mouthpiece. This cap enables the preservation of the tip from shocks, dust, and dirt when it is in a bag or pocket.

The protective cap for the mouthpiece of Lost Vape's Ursa Cap Pro podmod

A magnetic connection system

The change of cartridges is simple. Lost Vape enables you to switch from one cartridge to another to vary the e-liquids according to your needs, thanks to a magnetic connection ensuring a stable anchor between the cartridge and the podmod.

The magnetic connection of Lost Vape's Ursa Cap Pro podmod

The podmod functioning

Designed for use by beginner or intermediate vapers, this podmod is easy to use.

To turn it on or off, simply press the fire button 5 times in succession.

To adjust the wattage, press the fire button 3 times. The power level will then flash on the OLED screen. Then press the same button to increase the power and wait a few seconds for the selection to be automatically saved.

If you want to lock or unlock your Ursa Cap Pro podmod, simply press the fire button on the podmod 4 times.

The draw is automatic (auto-draw system), so you just need to inhale through the mouthpiece to vape.

The screen of Lost Vape's Ursa Cap Pro podmod

A built-in battery: 1,200mAh capacity

The Pro version of Ursa Cap has a battery with 1,200mAh capacity for a maximum power of 35W.

The level of battery left is indicated by the OLED screen.

To recharge it, use the USB-C port (located under the podmod) and insert the cable included in the box.

The recharging USB-C port of Lost Vape's Ursa Cap Pro podmod

The Ursa V3 cartridge

The Ursa Cap Pro podmod is delivered with a Ursa V3 cartridge with 0.8ohm sealed coil.

It has a 2.5 ml tank and a transparent coating so you can see how much e-liquid is left. It is filled from the top (top filling).

Please note that your Ursa Cap Pro podmod is also compatible with the entire range of Ursa cartridges.

The Ursa V3 cartridge of Lost Vape's Ursa Cap Pro podmod

A 0.8ohm sealed coil

Thanks to its built-in battery, you only have to fill the tank with your e-liquid, wait for some minutes, and clip the cartridge to the podmod thanks to the magnetic connection.

The coil of a 0.8ohm value is suited to a slightly tight draw with good flavors.

The airflow system

This Ursa Cap Pro podmod offers a versatile draw. Indeed, you'll have the choice between a tight draw in indirect inhaling (MTL), or a more airy one in restrictive direct inhaling (RDL).

To set the intensity, you only have to use the sliding switch on the side and adjust the airflow opening. The more open it is, the airier the draw.

The airflow of Lost Vape's Ursa Cap Pro podmod

The filling of the Ursa V3 cartridge

For the tank filling, you only have to:

1. Take the cartridge off the podmod
2. Open the silicone strip located on the top of the cartridge
3. Put the bottle tip
4. Press the bottle to fill the cartridge
5. Close the silicone strip

Once the tank is filled, wait for at least 5 minutes to let the coil be correctly primed with e-liquid before vaping.

The top filling of Lost Vape's Ursa Cap Pro cartridge

Box contents of Ursa Cap Pro podmod

• 1 Ursa Cap Pro podmod
• 1 2.5ml Ursa V3 cartridge in 0.8ohm
• 1 lanyard
• 1 USB-C cable
• 1 user guide

The Ursa Cap Pro podmod is made by Lost Vape.

Box contents of Lost Vape's Ursa Cap Pro podmod