Innokin Klypse Mecha Podmod

Klypse Mecha by Innokin: Vape with the time close at hand!

The Klypse Mecha is a kit for vapers looking for compact and easy-to-use equipment.

Designed to accommodate Klypse cartridges with sealed coils, this podmod has a built-in 900mAh battery for a maximum power of 18 watts.

Its little bonus: it tells time.

Innokin's Klypse Mecha podmod

The design of Klypse Mecha

The first thing you'll notice about this little e-cigarette is its look! Meticulously crafted by Innokin's engineers, the Klypse Mecha features a design inspired by the world of watchmaking.

To complete this zinc alloy structure with gear motifs, the manufacturer has equipped its podmod with an option on its OLED screen: your Klypse Mecha displays the time!

This rectangular mod is compatible with the entire range of Klypse cartridges, which slot into the magnetic connector.

Its compact dimensions of 94.2 x 42.7 x 17 mm and weight of 104 g make it a portable kit that is easy to handle.

Handling Inookin's Klypse Mech podmod

The magnetic connection between cartridge and podmod

Safely housed inside the podmod, the Klypse cartridge clips into place thanks to a magnetic connector.

Its 2ml tank has a sealed coil, making it as simple and handy to use as possible.

Innokin offers the Klypse Mecha with two cartridges, one with a sealed 1.2ohm coil and the other with a 0.6ohm coil.

The magnetic connection system of Innokin's Klypse Mecha podmod

An entirely automatic activation

But how can you make the most of your electronic cigarette? Nothing could be simpler! Just inhale through the mouthpiece, which automatically activates the built-in 900mAh battery.

Innokin lets you adjust the power using the small dial on the front panel. To do this, press the wheel twice in quick succession to access the menu on the OLED screen, select Wattage mode, then decrease or increase the watts by turning the wheel.

You'll also enjoy a bonus with this kit: with each puff, the screen will light up and display the time for a few seconds.

The OLED screen of Innokin's Klypse Mecha podmod

A built-in battery rechargeable by USB-C

Concerning the capacity of the 900mAh built-in battery, you'll have real-time access to the level of battery remaining, thanks to the luminous indicator all around the screen:

• Green LED: battery >30%
• Yellow LED: battery between 10% and 30%
• Red LED: battery <10%

After enjoying 900mAh of capacity from the built-in battery, you'll simply proceed to recharge through its USB-C port, located on one of the Klypse Mecha sides.

For this, take the recharging cable included and connect it to a computer port or a mod. Tick, tock, tick, tock... Does the luminous screen show 100%? You can now use your electronic cigarette serenely!

The USB-C recharging port of Innokin's Klypse Mecha podmod

The Klypse cartridge with sealed coil

Innokin made this Klypse Mecha to be perfectly compatible with the collection of legendary Klypse cartridges. Disposable, these 2ml tanks have a fixed coil, so you don't have to change the coil when it is used.

Innokin delivers this podmod with two types of cartridges:

• 1 1.2ohm Klyspe cartridge: to use between 6 and 11W; for a tight draw in indirect inhaling (MTL)
• 1 0.6ohm Klyse cartridge (pre-installed): to use between 6 and 18W; for a more airy draw in restrictive direct inhaling (RDL)

After two to three weeks of use, the coil will start to show some signs of wear (loss of flavor, light burnt taste). It is time to change the whole cartridge to a new one!

The cartridge of Innokin's Klypse Mecha podmod

An adjustable airflow

Once you've selected the cartridge (1.2ohm or 0.6ohm), you'll also have the possibility to slightly change of vape type, thanks to a discreet but useful system of airflow settings.

For this, simply slide the small button on one of the Klypse Mecha sides; you'll then modify the airflow sent under the cartridge, allowing you to modify your vape sensations (more or less airy).

The airflow button of Innokin's Klypse Mecha podmod

A 2ml tank rechargeable with e-liquid

The Klypse cartridge is disposable by a fixed coil system, but it is not less rechargeable with e-liquid.

To easily and quickly proceed to the filling of the 2ml tank, simply follow the steps below:

1. Disconnect the cartridge from the magnetic base
2. Lift the silicon strip located on the side of the tank
3. Insert the tip of your bottle in the filling hole
4. Pour your e-liquid up to three-quarters
5. Carefully close the silicon strip
6. Replace the cartridge in the compartment

Don't forget to wait for 5 to 10 minutes before vaping if you use a new cartridge so that the sealed coil is correctly primed.

The filling of the cartridge for Innokin's Klypse Mecha podmod

Contents of the box

• 1 Klypse Mecha 900mAh podmod
• 1 2ml 1.2ohm Klypse cartridge (pre-installed)
• 1 2ml 0.6ohm Klypse cartridge
• 1 USB-C recharging cable
• 1 user guide

The Klypse Mecha podmod is made by Innokin.

The contents of the box for Innokin's Klypse Mecha podmod