Lost Vape Ursa Nano S2 Podmod

Lost Vape offers the S2 version of its Ursa Nano podmod with a 1,000mAh built-in battery and a maximum power of 30 watts.

An easily transportable electronic cigarette, because of its small format, and particularly suited to vape beginners thanks to its simplicity of use.

This model charges Ursa cartridges with first-generation sealed coils and V2 cartridges for a tight draw.

Lost Vape's Ursa Nano S2 podmod

A compact and ergonomic kit

With the S2 version of Ursa Nano, Lost Vape continues to choose a thin design in polycarbonate with a leather coating to ease handling.

With dimensions of 108x24.4x15.4mm and its weight of only 39g, you'll benefit from a compact and light electronic cigarette.

Handling of Lost Vape's Ursa Nano S2 podmod

A magnetic connection

Composed of a built-in battery and a cartridge with a sealed coil, the Ursa Nano S2 podmod uses a magnetic system to connect these two elements.

This system ensures a safe connection and simplifies the replacement of cartridges to change the e-liquid flavors.

The magnetic connection of Lost Vape's Ursa Nano S2 podmod

The intuitive functioning of the podmod

With the Ursa Nano S2 podmod, the use is simplified to the maximum. It is instantly activated upon inhaling through the mouthpiece (auto-draw system).

Its power, which can reach 30W, automatically adjusts according to the value of the sealed coil.

A built-in battery rechargeable via USB-C

Despite a reduced format, the Ursa Nano S2 podmod has a 1,000mAh capacity.

The charge level is indicated by the LED on the front side:

• Red LED: 0 to 30% of battery left
• Yellow LED: 30 to 60% of battery left
• Green LED: 60 to 100% of battery left

When the LED is red, get a USB-C cable (not included) to recharge the battery. You only have to connect it to the port included on the podmod's side.

The USB-C port of Lost Vape's Ursa Nano S2 podmod

The Ursa cartridge

Lost Vape delivers the Ursa Nano S2 podmod with a pre-installed 0.8ohm Ursa V2 cartridge.

No need to buy a coil, it is directly sealed in the cartridge.

With a 2.5ml capacity, the coil is simply filled by taking the cartridge out of the podmod, by lifting the lateral strip with the 'OPEN' note.

The cartridge of Lost Vape's Ursa Nano S2 podmod

The Ursa coil

The Ursa Nano S2 podmod has a Ursa V2 cartridge, equipped with a 0.8ohm sealed coil, previously installed, that offers an aerated vape experience.

This sealed coil can also be used to vape e-liquids with nicotine salts.

When the coil is worn out, you only have to replace the cartridge. For this, take the used cartridge out by pulling on the mouthpiece, insert a new cartridge that you filled, and wait for some minutes so the coil is correctly primed.

Adjustable airflow

On top of choosing your coil, you have the possibility to adjust the airflow with a small latch located on the podmod's side.

You can choose between a tight draw and an airier vape.

The airflow of Lost Vape's Ursa Nano S2 podmod

How to fill the tank?

Here is a guide to follow step by step to easily fill the 2.5ml tank:

1. Take the cartridge out of the podmod
2. Take out the silicone strip on the side
3. Insert the bottle tip into the filling hole
4. Push to pour the e-liquid
5. Close the strip

If you've installed a new cartridge, wait for some minutes before vaping so the sealed coil is correctly primed with e-liquid.

The filling of the Ursa cartridge for Lost Vape's Ursa Nano S2 podmod

Box contents

• 1 1,000mAh Ursa Nano S2 podmod
• 1 Ursa V2 cartridge in 0.8ohm
• 1 user guide

The Ursa Nano S2 podmod is made by Lost Vape, delivered without a USB-C cable.

Box contents of Lost Vape's Ursa Nano S2 podmod