Innokin EZ Leva Podmod

For those looking for a compact and easy-to-use podmod, Innokin presents an EZ  Leva kit.

This podmod is equipped with a 400mAh built-in battery and is magnetically paired with a 2,000mAh power bank, for a total capacity of 2,400mAh.

Made for vape beginners or anyone looking for a handy e-cigarette, this kit prioritizes simplicity with an auto-draw system and a tight MTL (indirect) draw.

With this kit, you'll also receive two EZ Leva cartridges with sealed coils of 1.2ohm (pre-installed) and 1.6ohm, both equipped with a 2.5ml tank.

These LED indicators on the podmod and the powerbank display the level of battery in real time.

Innokin's EZ Leva kit

A flat and handy format

Made in aluminum alloy, the EZ Leva measures 83.4 x 21.1 x 12.1mm and has a weight of 30g. Handy, its flat format enables it to slide into any pocket or bag without taking up any extra space.

As for the accompanying power bank, it measures 86 x 45 x 16.4mm and weighs 70g. Its body is made of aluminum alloy with a leather-like finish, giving it a sleek look and a comfortable feel in the hand.

Once the podmod is connected to the external battery, the total weight of the kit is around 100g.

Handling of Innokin's EZ Leva kit

A pod battery and a power bank for extended battery life

The 400mAh battery built into the podmod charges directly from the power bank via the magnetic connection: simply place the podmod on the power bank to start charging automatically.

An LED indicator built into the front of the podmod shows the remaining battery level in real time:

• 100% battery: all 3 LED lights are white
• 10% to 90% battery: the lights are white, and stars are visible
• Less than 10% battery: the LEDs are red

The LED indicator of Innokin's EZ Leva kit

The power bank also has its own indicator to track its charge level.

It’s located on the top edge:

• 100% charge: 3 white bars
• 75–99€: 3 white bars and stars
• 30–75%: 2 white bars and stars
• 10–30%: one white bar with stars
• Less than 10%: one red bar

The LED lights of the power bank on Innokin's EZ Leva kit

By the way, if your power bank isn't within reach, Innokin has equipped your podmod with a USB-C port so you can charge it using a USB-C cable and an external power source (computer or wall outlet).

As for the power bank, it has a capacity of 2,000mAh.

Is your pod’s battery running low? Place it inside its power bank, where it’s securely held in place by a magnetic connection system.

The USB-C ports of Innokin's EZ Leva kit

A simple functioning

The EZ Leva kit has no buttons or manual settings: everything relies on auto-draw.

In fact, a simple inhale through the mouthpiece is all it takes to activate the podmod for vaping.

The power output automatically adjusts to the cartridge installed: 12W for the 1.2ohm coil and 9W for the 1.6ohm coil.

The EZ Leva cartridges

The kit comes with two 2.5ml EZ Leva cartridges made of PCTG and featuring sealed coils (1.2ohms and 1.6ohms).

Both options offer a tight MTL draw with indirect inhalation.

These cartridges do not require coil replacement; once the cartridge is worn out, discard it and replace the entire cartridge with a new one.

The cartridge of Innokin's EZ Leva kit

Side-fill cartridge

To fill the 2.5 ml tank, simply:

1. Remove the cartridge from the podmod
2. Open the silicone side flap located on the side of the cartridge
3. Insert the tip of your e-liquid bottle into the fill port
4. Gently squeeze the bottle to fill the cartridge
5. Close the silicone side flap
6. Reinsert the cartridge into the podmod

Are you using a new cartridge? Wait 5 to 10 minutes before taking your first puff to allow the coil to fully absorb the e-liquid.

Filling the cartridge of Innokin's EZ Leva kit

Box contents

• 1 400mAh EZ Leva podmod by Innokin
• 1 2,000mAh Powerbank
• 1 2.5ml EZ Leva cartridge with a 1.2ohm sealed coil
• 1 2.5ml EZ Leva cartridge with a 1.6ohm sealed coil
• 1 USB-C cable
• 1 user guide

The EZ Leva kit is made by Innokin.

Box contents of Innokin's EZ Leva kit