BD Vape Precisio 2 Sub-Ohm Limited Edition Clearomizer

BD Vape offers the second version of the Precisio Sub-Ohm clearomizer in a limited edition.

Its high-end machining is made of stainless steel with precise inscriptions and refined finishes.

Meant for enthusiasts of airy draws in direct inhalation (DL), this clearomizer of 26mm diameter is capable of holding 5.5ml or 7.5ml of e-liquid by installing the second Pyrex bulb included in the box.

Its filling is made from the top via a top-filling system, enabling it to limit the risks of leakage.

You'll receive it with three BDC V2 coils, and it is compatible with the classic BDC coils.

The Precisio 2 Sub-Ohm Limited Edition clearomizer with Lost Vape's BT200 mod

A High-End clearomizer in a limited version

The Precisio 2 Sub-Ohm has a 26mm diameter, a height of 54mm, and a construction in stainless steel.

From top to bottom, you'll find intricate designs throughout the clearomizer, characteristic of this limited edition.

It features a replaceable 810 drip tip, compatible with standard 810 drip tips available on the market.

As for its 510 connection, it allows you to screw it onto most electronic mods.

BD Vape's Precisio 2 Sub-Ohm Limited Edition clearomizer

A big adjustable tank

The clearomizer comes with two Pyrex bubble tanks, one with a 5.5ml capacity and the other with a 7.5ml capacity.

Depending on your needs, you can switch between the two to enjoy even longer battery life.

In addition, the tank is filled from the top (top-fill) by turning the top cap a quarter turn, without having to completely disassemble the tank.

The BVC V2 coils

With your clearomizer, you'll receive three BDC V2 coils for a draw in direct inhalation (DL):

• 1 0.15ohm BDC V2 coil (pre-installed): recommended use around 70W (60-80W range)
• 1 0.30ohm BDC V2 coil: recommended use around 55W (40-60W range)
• 1 0.40ohm BDC V2 coil: recommended use around 50W (40-60W range)

As soon as you feel a loss of flavor or a burnt taste, it is recommended to change the coil.

For this:

1. Unscrew the bottom part of the Precisio 2 Sub-Ohm
2. Take the used coil by slightly pulling on it
3. Soak the new coil with some e-liquid drops before installing it
4. Insert the coil in its compartment
5. Screw back the bottom part of your clearomizer
6. Fill the tank, then wait for some minutes before vaping it

An adjustable top airflow

The air intake is located on the top part of the clearomizer thanks to a rotary ring composed of two large openings.

To adjust the draw, you only have to turn this ring to open the holes more or less.

As a reminder, the more you open the holes, the airier the draw. Conversely, the more you close the holes, the more restricted the draw.

The airflow of BD Vape's Precisio 2 Sub-Ohm Limited Edition clearomizer

A quick top-filling

Whether you use the 5.5ml or 7.5ml tank, here are the steps to fill the clearomizer with e-liquid:

1. Unscrew the top cap
2. Insert the bottle tip into the filling hole
3. Pour the e-liquid
4. Close the top cap

If your coil is new, wait for some minutes so you let the cotton get primed with e-liquid.

The filling of BD Vape's Precisio 2 Sub-Ohm Limited Edition clearomizer

Box contents

• 1 Precisio 2 Sub-Ohm Limited Edition clearomizer
• 1 0.15ohm BDC V2 coil (pre-installed)
• 1 0.3ohm BDC V2 coil
• 1 0.4ohm BDC V2 coil
• 1 5.5ml bubble Pyrex (pre-installed)
• 1 7.5ml bubble Pyrex
• 1 kit of silicone seals
• 1 810 drip tip
• 1 user guide

The Precisio 2 Sub-Ohm Limited Edition clearomizer is made by BD Vape.

Box contents of BD Vape's Precisio 2 Sub-Ohm Limited Edition clearomizer