Lost Vape Centaurus BT200 Mod

Lost Vape unveils the Centaurus BT200, a dual 18650 battery mod (not included) capable of syncing with your smartphone via Bluetooth.

This electronic mod also features a large 2.4-inch color display screen allowing you to customize your vape experience.

Its chipset delivers up to 200W of power, while the USB-C port allows it to be charged from the mains. The 510 connector accepts clearomizers and atomizers up to 26 mm in diameter without overflow.

Lost Vape's Centaurus BT200 mod with Geek Vape's Zeus Sub-Ohm clearomizer

A mod entirely customizable via Bluetooth

The first Lost Vape mod with Bluetooth connectivity, the Centaurus BT200 syncs with your smartphone in seconds using the dedicated app. A QR code is displayed directly on the mod's screen to download it.

Once connected, simply browse the app to discover all the available settings. What are they?

From the app, you can:

• Choose your vape mode (POWER, VOLTAGE, TURBO, Ti, Nin, SS316, VPC) and adjust as needed
• Create up to 3 atomizer profiles
• Use Custom Mode to set the power curve (only via the app)
• Customize your interface by choosing the wallpaper you want to see on the screen
• Track your consumption in real time

With this range of options, the Centaurus offers you a tailor-made, scalable, and fully remote-controlled vape experience.

The QR Codes of the Centaurus app for Lost Vape's Centaurus BT200 mod

The design of the Centaurus BT200 mod

Made from brushed aluminum alloy and stainless steel, the mod retains the Centaurus design with a rectangular shape and rounded edges. Its dimensions of 92.9x56.9x26.9mm and weight of approximately 150g (without batteries) make it an imposing mod, but one that is comfortable to handle.

On the main face, Lost Vape offers a 2.4" color screen so you can see all the essential information at a glance. It is fully customizable: choose from one of the five built-in themes, adjust the brightness, or import your own wallpaper via the Bluetooth connector.

One of the edges houses all the controls:

• A circular LED wheel indicating the charge level, allowing you to browse the menu and activate the vape with the fire button in the center
• A SET button to access the menu
• A sliding ON/OFF SWITCH button to turn the mod on or off
• A USB-C port for charging

The rear features a magnetic panel covering the housing for the two 18650 batteries.

Lost Vape's Centaurus BT200 mod

A mod with fully customizable settings

Thanks to its Quest X 3.0 chipset, the Centaurus BT200 lets you customize your vape with several modes:

1. POWER (default setting): adjust the wattage from 5 to 200W
2. VOLTAGE: adjust the voltage from 0.7 to 8.0V
3. TURBO: deliver the maximum power of your batteries according to the value of your coil
4. VPC: create and control a custom power curve from the app
5. Ti, Ni, SS316: for temperature control

For more customization, a BOOST function (excluding TURBO mode) allows you to increase the power during the first few seconds of the draw. 

It has three levels: SOFT/NORM/HARD.

To browse the screen menu, simply press the SET switch and use the circular wheel. Pressing this same switch three times puts the screen in standby mode, allowing you to continue vaping peacefully.

The screen of Lost Vape's Centaurus BT200 mod

Finally, there is a slide switch located just above the USB-C port that locks or unlocks the mod for safe transport.

The locking switch of Lost Vape's Centaurus BT200 mod

A capacity with 18650 dual batteries

Two batteries are required to operate your Centaurus BT200, ensuring extended capacity when vaping.

To get started:

1. Obtain two 18650 batteries (not included)
2. Remove the magnetic rear panel to access the battery compartment
3. Insert the batteries according to the (+ or -) markings on the bottom
4. Put the cover back on

Please note that the battery level can be read directly via the LED built into the wheel; details below:

• Red LED: < 20%
• White LED: 20 to 40%
• Blue LED: 40 to 60%
• Green LED: 60 to 80%
• Purple LED indicator: 80 to 100%

To avoid running out of battery power, remember to charge two additional batteries using an external charger. We also recommend that you always use this type of charging system to maximize battery life.

The 18650 dual battery compartment of Lost Vape's Centaurus BT200 mod

Are you out of batteries? Use the USB-C cable included with the mod. Plug it into the USB-C port beneath the SWITCH slide switch and connect the other end to a wall outlet, computer, or power bank.

The USB-C port of Lost Vape's Centaurus BT200 mod

Box contents

• 1 Centaurus BT200 mod
• 1 USB-C cable
• 1 user guide

Box contents of Lost Vape's Centaurus BT200 mod