Hellvape Fat Rabbit V2 Sub Ohm Clearomiser

Produce huge clouds of vapour with the Fat Rabbit V2 Sub Ohm clearomiser and its airy DTL draw !

If you liked the Fat Rabbit, then you’ll love its second iteration ! This clearomiser is still as good at sub-ohm vaping and producing beautiful clouds of tasty vapour. Its 28mm width will go well with all of your direct inhale (DTL) mods.

Its straight 4ml tank can be swapped for a round 5ml tank if you wish. The latter is included in the Fat Rabbit V2 kit. You can also choose between two types of Hellvape’s P Coils, either the 0.15ohm or 0.2ohm coils.

Hellvape’s Fat Rabbit V2 clearomiser on Geek Vape’s Aegis L200 mod

A well-sculpted body

The Fat Rabbit V2 is certainly impressive, measuring 50.7 tall and 28mm wide with the straight tank equipped, even 30mm with the bubble-shaped tank equipped ! This clearomiser will proudly sit on top of any mod that can accommodate this sort of diameter. The 5ml round tank is included in the Fat Rabbit V2 kit.

The upper and lower parts of the clearomiser are engraved with one of Hellvape’s designs and comprise no fewer than six air intakes ! The Fat Rabbit is equipped with a standard 510 pin and a beautiful 810 drip tip, which is ideal for cloudy vapes.

Hellvape’s Fat Rabbit V2 clearomiser

The P coils

In order to provide the tastiest and most cloudy vaping sessions, the Fat Rabbit V2 functions with Hellvape’s P7 coils. The latter are available in two resistance values, namely 0.15 and 0.2ohm, and one of each is included in the kit as well. That way, you can try them out before buying a new set. 

These coils are made from quality organic cotton and contain a mesh that heats up quickly and produces excellent flavours.

Here are the specifications of each type of coil :

• The P7-02 KA1 Meshed coil has a resistance of 0.2ohm and should be used between 50 and 60 watts
• The pre-installed P7-01 KA1 Meshed coil has a resistance of 0.15ohm and should be used between 60 and 70 watts

After two to three weeks of use, your coil will probably be worn out (weaker flavours, burnt taste, etc). You’ll have to change it for a new one. You can buy a spare set of P Coils in the resistive value of your choice.

Here’s how to change the coil :

1. Remove the clearomiser from your mod
2. Unscrew its lower part
3. Pull out the old coil
4. Soak a new coil with a few drops of e-liquid, then insert it into its slot
5. Screw the clearomizer’s lower part back on
6. Fill up the tank with e-liquid
7. Screw the Fat Rabbit V2 back on your mod
8. Wait 5 to 10 minutes for the new coil to prime itself before vaping

Six air intakes

Vapour is on the menu with Hellvape’s Fat Rabbit V2 ! Its dual airflow system will delight the fans of cloudy vapes. And if that isn’t enough, there are three air intakes on each ring that surrounds the tank, totalling six air intakes.

You can adjust the airflow to your liking, although remember it’ll always be more or less airy. These air intakes also cool the coil, the tank, and the vapour you inhale.

The dual airflow system of Hellvape’s Fat Rabbit V2 clearomiser

A nice top-fill tank

Whether you choose to equip your clearomiser with the straight 4ml Pyrex tank (pre-installed) or the round 5ml tank, you'll be filling the tank from above.

Although the Fat Rabbit V2 can hold a nice amount of e-liquid already (4 or 5ml), your cloud-chasing passion will surely require you to refill the clearomiser’s tank during the day. Fortunately, Hellvape has thought of everything! The manufacturer has designed its clearomiser with an easy top-fill system.

Therefore, there is no need to remove the Fat Rabbit V2 from your mod to refill it! Proceed as follows to do so:

1. Turn the top cap by a quarter turn to access the three filling holes
2. Insert the tip of your bottle of e-liquid into one of these three holes. Be careful not to pour any liquid into the middle chimney!
3. Fill up the tank with e-liquid, never to the brim
4. Put the top cap back on, then turn it by a quarter turn to close it
5. Remember to wait 5 to 10 minutes before vaping if you’re using a new coil

The filling holes of Hellvape’s Fat Rabbit V2 clearomiser

Contents 

• The Fat Rabbit V2
• A pre-installed straight Pyrex tank of 4ml
• A spare round Pyrex tank of 5ml
• One P7-01 KA1 Meshed coil of 0.15ohm (pre-installed)
• One P7-02 KA1 Meshed coil of 0.2ohm 
• A set of spare parts
• A user guide

The Fat Rabbit V2 Sub Ohm clearomiser is manufactured by Hellvape.

The contents of Hellvape’s Fat Rabbit V2 Sub Ohm clearomiser kit