Hellvape Hellbeast 2 P Coils (x3)

Hellvape's P Coils must be used on the Hellbeast 2 clearomizer, made by the same manufacturer.

They are available as a pack of 3.

They are made from Kanthal A1 and Mesh, and they excel at flavor rendering and vapor production alike.

Coils made for the Hellbeast 2

The P Coils are specifically designed for the Hellbeast 2 clearomizer and contain high-quality organic cotton. They will last longer and will produce great flavors!

They also contain a large Mesh structure that heats faster and produces more accurate flavors, and with still as much vapor!

The P Coils are presented here in their P7 version, which means they have a 0.2 ohm coil. We recommend you use them between 50 and 60 watts, preferably with e-liquids that have at least 50% vegetable glycerin (VG) in them.

Installing and replacing a P Coil 

When you buy the Hellbeast 2 clearomiser, there’s already a coil in there.

Then, every two to three weeks on average, you will need to replace it. Proceed as follows:

1. Unscrew the lower part of the Hellbeast 2 clearomizer
2. Pull the coil out of its slot and throw it away
3. Unpack a new coil and soak it with a few drops of e-liquid
4. Insert the new coil in its slot, in the middle of the tank
5. Screw the Hellbeast 2 clearomizer back together

The P Coils for the Hellbeast 2 clearomizer are made by Hellvape. They are only available in packs of 3.