Aspire X Taifun Atlantis GT Clearomizer

Every time Aspire and Taifun join forces, a new vape star is born. Everything you need to know about the Atlantis GT clearomizer in a video!

Born from a collaboration between two world-renowned manufacturers, Aspire and Taifun, here is a clearomizer dedicated to fans of airy draws! The Atlantis GT combines modern design with performance designed for direct inhaling (DTL) vaping.

The clearomiser has a 4ml tank, topped with a flared 510 drip tip, and is compatible with Aspire’s Atlantis SE coils. This robust clearomiser has a diameter of 25mm, which fits onto most of the market’s mods.

Aspire & Taifun’s Atlantis GT clearomizer on Lost Vape’s Thelema Quest Solo 100W mod

A protected straight Pyrex

Aspire and Taifun have combined their expertise to bring you a clearomizer that is both contemporary and effective. One thing’s for sure, the Atlantis GT will not go unnoticed, regardless of which mod it’s fitted on!

Its stainless steel frame is the result of creative and meticulous work, and it definitely sets it apart from its rivals. This frame is aesthetic and robust at the same time, forming a protective cage around the clearomiser’s Pyrex tank. There is a spare PSU (Polysulfone Plastic) tank included in the kit.

Its size of 50.3mm by 25mm will instantly embellish any mod that can accommodate the Atlantis GT.

Aspire & Taifun’s Atlantis GT clearomizer

Coils dedicated to DTL vaping

The clearomiser is compatible with Aspire’s Atlantis SE coils, two of which are included in the kit:

• 1 Atlantis SE coil of 0.18Ω, to be used between 45 and 60W for a very airy draw
• 1 pre-installed Atlantis SE coil of 0.3Ω: to be used between 30 and 40W for a slightly tighter draw

How to change the coil of the Atlantis GT?

When the time comes to change your coil, after two to three weeks of use on average, you should:

1. Remove the Atlantis GT from your mod
2. Unscrew the lower part of the clearomizer
3. Remove the worn-out coil by pulling it out
4. Unclip the airflow reducer (see below)
5. Soak your new coil with a few drops of e-liquid
6. Push the new coil into the airflow reducer, then into its slot
7. Screw the lower part of your Atlantis GT back on
8. Fill up the tank with e-liquid
9. Wait 5 to 10 minutes for the new coil to soak up the e-liquid

Internal airflow reducers

In addition to the usual air intake ring, located on top of the clearomizer, the Atlantis GT comes with two internal airflow reducers.

• 1 airflow reducer with 1.2mm holes
• 1 airflow reducer with 1.5mm holes

So, depending on which coil is installed and the type of draw you’re looking for, you will insert your coil into one of the two reducers. The latter also serves as a base to hold all the parts together.

This dual airflow system offers a great deal of customization, allowing you to fine-tune the air intake depending on your draw.

The airflow ring of Aspire & Taifun’s Atlantis GT clearomizer

How to fill the 4ml of the Atlantis GT?

Beneath the clearomizer’s sturdy frame lies a tank with an e-liquid capacity of 4ml.

Aspire and Taifun have opted for a side-fill system, which means that you have to pour your e-liquid through the side of the tank.

To fill your Atlantis GT with e-liquid, you will need to:

1. Twist the clearomizer’s top cap to access the filling hole
2. Insert the tip of your bottle of e-liquid into said hole
3. Fill up your tank to about three-quarters, never to the brim
4. Turn the top part in the opposite direction to close the hole

N.B.: Remember to wait 5 to 10 minutes before vaping if you’re using a new coil.

The side-fill system Aspire & Taifun’s Atlantis GT clearomizer

Contents

• The Atlantis GT clearomizer
• 1 Atlantis GT SE coil of 0.3Ω (pre-installed)
• 1 Atlantis GT SE coil of 0.18Ω
• A spare PSU tank
• 2 airflow reducers (one of them is pre-installed)
• A set of spare gaskets
• A user guide

The Atlantis GT clearomizer is designed and manufactured by Aspire and Taifun.

The contents of Aspire & Taifun’s Atlantis GT clearomizer kit