Geek Vape Z Sub-Ohm SE Clearomizer

The Z Sub Ohm SE 2022 clearomizer is an updated version of the iconic Zeus Sub Ohm!

Enjoy a beautiful clearomizer with a diameter of 24mm at its base (26mm just above that and 29mm around the tank) and a 5.5ml tank. It’s compatible with the manufacturer’s Z Series coils and is equipped with Geek Vape’s famous top airflow. It’s still filled from above, but it now has improved childproof protection!

With this sort of device, you’ll be chasing clouds all day long!

The Z Sub-Ohm SE clearomizer with Dovpo’s Riva 200 mod

A design that’s similar to the original

The Z Sub Ohm SE 2022 clearomizer is the latest in Geek Vape’s legendary Zeus lineage. Of course, it has a few new features!

1. It’s 24mm wide at first, before widening to 26mm, and even goes up to 29mm if you count its chunky 5.5ml Pyrex tank
2. It’s also slightly bigger than its predecessors, about 51.9mm tall, with an 810 pin and drip tip
3. It has a series of stylish diagonal engravings on its top cap and base

Geek Vape’s Z Sub-Ohm SE 2022 clearomizer

The Z Series coils

Just like its famous predecessor, the Zeus Sub Ohm 2022 clearomizer can operate with any one of Geek Vape’s Z Series coils. 

There are two of them included in the clearomizer kit:

• One 0.15Ω Z Series XM Mesh coil (pre-installed), to be used between 70 and 85 watts
• One 0.4Ω Z Series Mesh coil, to be used from 50 to 60 watts.

As soon as the coil is worn out (every two to three weeks on average), you will have to replace it. To do so:

1. Unscrew the clearomizer’s lower part
2. Remove the old coil (you can use the tool provided)
3. Grab a new coil and soak it with a few drops of e-liquid
4. Insert it where the old one was
5. Screw the clearomizer’s lower part back on

Geekvape’s inimitable top airflow!

It would be inconceivable for a member of the Z family to not use Geek Vape’s renowned top airflow system!

On the upper part of the Z Sub Ohm 2022 clearomizer are the wide air intakes you know and love, designed for a direct inhale (DTL) and even a restrictive direct inhale (RDL).

To adjust the draw, simply turn the ring from right to left until you find the right airflow for your needs.

The air intake of Geek Vape’s Z Sub-Ohm SE clearomizer

A generous and safe 5.5ml Pyrex tank 

The Z Sub-Ohm SE clearomizer is fitted with a bubble-shaped Pyrex tank that can hold up to 5.5ml of e-liquid.

The original Zeus Sub Ohm is filled from above, and the 2022 version is no exception, except that it has a safer childproof system.

To do so, you have to :

1. Press the button next to the horizontal arrow, on the clearomizer’s top cap
2. Push the top cap outwards, towards the right
3. Insert the tip of your bottle of e-liquid into one of the two side holes
4. Fill the tank with e-liquid, up to 5.5ml
5. Push the top cap to the left, back to its original position, to close the clearomizer
6. Wait 5 to 10 minutes for the coil to prime itself properly!

Remember to never pour any e-liquid into the middle hole. Also, never fill the tank to the brim.

The filling wells of Geek Vape’s Z Sub-Ohm SE clearomizer

Contents

• The Zeus Sub Ohm SE 2022 clearomizer
• A spare Bulb Pyrex tank of 5.5ml
• One pre-installed 0.15Ω Z Series coil
• One 0.4Ω Z Series coil
• A tool for inserting/removing your coil
• Spare O-rings
• A user guide

The Z Sub-Ohm SE 2022 clearomizer is manufactured by Geek Vape.

The contents of Geek Vape’s Z Sub-Ohm SE clearomizer kit