Vaporesso Armour Octa Mod

Power and sturdiness with the new Armour mod by Vaporesso. Discover the Armour Octa in this video!

Vaporesso comes back with the Octa version of its Armour mod, a device made to resist dust and water splashes while being sturdy.

Indeed, the Armour Octa has numerous protections, with IP6X, IPX8, and IPX9K ratings.

Its Axon 3.0 chipset gives you access to several setting modes, with a power setting up to 220 watts.

As for the battery capacity, the Armour Octa mod supplies two 18650 batteries (not included) and has a USB-C port.

With a 24mm diameter, it can hold all clearomizers and atomizers equipped with a standard 510 pin.

Geekvape's Armour Octa mod with the Z Fli 2 clearomizer

A revisited design, a preserved protection

For its Octa version of the Armour mod, Vaporesso keeps a TPU plastic coating while betting on modern colors.

The Armour Octa mod measures 92.4 x 54 x 30.8 mm for a weight of 162g and a 24mm diameter.

Its main side has, from top to bottom:

• 1 switch button
• 1 0.96" TFT screen
• 2 browsing buttons
• 1 USB-C port protected by a silicone strip

Vaporesso's Armour Octa mod

An IP69K-certified mod

The Armour Octa mod benefits from numerous technologies, making it sturdy and resistant.

Indeed, this electronic mod is IP69K certified, protecting it against dust and water splashes.

This protection is possible thanks to a silicone coating and a design with IP6X, IPX8, and IPX9K.

A customizable functioning thanks to the Axon 3.0 chipset

The Armour Octa mod is equipped with a high-performance Axon 3.0 chipset by Vaporesso.

The power is adjustable according to the selected mode, from 5 to 220W.

According to the vape experience desired, you'll have the possibility to select the operating mode that suits you from:

• BOOST mode: on the first puff, the chipset defines the maximum power handled by your coil
• PULSE mode: the chipset delivers a medium power for constant puffs
• ECO mode: for normal power, preserving the battery capacity
• TC (Ni/Ti/SS) mode: temperature setting according to the coil wire type used in your atomizer (RBA)

To check the menu of your Armour Octa on the 0.96" TFT screen, use the two browsing buttons located on top of the USB-C port.

The screen of Vaporesso's Armour Octa mod

The Armour Octa mod is also equipped with a sliding button enabling you to easily and quickly turn the mod on and off.

This switch is located on the mod's side.

The switch of Vaporesso's Armour Octa mod

A masterized capacity

With the Armour Octa, Vaporesso bets on dual 18650 batteries (not included).

To insert your batteries, you only have to open the trapdoor located under the mod.

Respect the polarity directions while inserting them into the compartment.

Don't hesitate to get spare batteries so you're never out of batteries!

The dual 18650 battery compartment of Vaporesso's Armour Octa mod

A protected USB-C port

Are you out of battery? Use the USB-C cable included in the box to recharge the Armour Octa.

Discover the recharging port under the two browsing buttons on the main side.

This Quick Charge 2.5A USB-C port is covered with a silicone membrane to ensure the box meets the IP69K certification.

However, we recommend using an external charger for your batteries whenever possible, as this will help extend their lifespan.

The USB-C port of Vaporesso's Armour Octa mod

Box contents

• 1 220W Armour Octa mod
• 1 USB-C cable
• 1 user guide

The Armour Octa mod is made by Vaporesso. It is sold without batteries.

Box contents of Vaporesso's Armour Octa mod