Lost Vape Thelema Solo 100 Pro Mod

Thelema Solo 100 Pro: the power of Quest X 3.0 chipset in a single battery

The Thelema series continues with the Solo 100 Pro, an electronic mod that is powered by a 21700 or 18650 single battery with the adaptor (battery not included).

Its 1.47" TFT screen and its setting buttons enable access to several functioning modes, with a power setting up to 100 watts.

This compact mod suits enthusiasts of airy draw in direct inhaling (DL), as well as vapers used to a tighter vape in indirect inhaling (MTL).

The Thelema Solo 100 Pro mod with Nubee's Bee Flow clearomizer

A compact design

The Thelema Solo 100 Pro measures 90.5x39.6x28.2mm for a weight without batteries of 135g.

Lost Vape has paid special attention to the design, opting for a zinc alloy and PU leather conception.

The main panel features the following from top to bottom:

• 1 Fire button
• 1 1.47inch TFT screen
• 1 ON/OFF switch
• 1 USB-C port

You’ll also find two adjustment buttons on one of the sides of the mod, allowing you to navigate the Thelema Solo 100 Pro menu.

Tip: Press and hold these two buttons for 3 seconds to lock the power setting.

Lost Vape's Thelema Solo 100 Pro mod

Customizable operation

Depending on your needs, Lost Vape puts you in control of your vaping experience through several adjustment modes:

• WATT Mode: manual power adjustment, from 5 to 100W
• BOOST Mode: delivers maximum power at the start of the puff
• VOLT Mode: set the voltage in volts
• Temperature Mode (Ni, Ti, SS): set the temperature based on the type of coil wire used

The Quest X3.0 chipset also lets you customize the graphical interface with 9 different themes.

The screen of Lost Vape's Thelema Solo 100 Pro mod

A capacity in a single battery

When it comes to battery life, Lost Vape gives you the choice!

You can either use a 21700 battery with the Thelema Solo 100 Pro or an 18650 battery using the included adapter.

Please note: the mod is sold without a battery; be sure to purchase one if needed.

To insert the battery into the mod, simply remove the magnetic panel that serves as the handle.

Be sure to follow the polarity directions indicated when inserting the battery.

The single battery compartment of Lost Vape's Thelema Solo 100 Pro mod

The Thelema Solo 100 Pro also features a USB-C port that allows you to recharge the device.

To do so, use the cable included in the box and plug it into this port, located just below the power switch.

However, we recommend using an external charger for your batteries whenever possible, primarily to preserve their lifespan.

The USB-C port of Lost Vape's Thelema Solo 100 Pro mod

Box contents

• 1 100W Thelema Solo 100 Pro mod
• 1 18650 adaptor
• 1 USB-C cable
• 1 user guide

The Thelema Solo 100 Pro mod is made by Lost Vape.

Box contents of Lost Vape's Thelema Solo 100 Pro mod