Nubee Bee Flow Clearomizer

The French brand Nubee is making its debut in the world of clearomizers with the Bee Flow, a tank designed in France and tailored for vapers who prefer an airy draw.

With a capacity of 5ml and a base diameter of 26mm, this tank is compatible with the vast majority of boxes and mods on the market.

Filling is clean and simple from the top thanks to its sliding top cap.

Additionally, you’ll receive two Bee Flow coils with your clearomizer (0.16 ohm and 0.20 ohm), tailored for a DL or RDL draw.

Nubee's Bee Flow clearomizer on Lost Vape's Centaurus BT200 mod

The refined design of the Bee Flow tank

Measuring 44x29mm (including the Pyrex bulb, excluding the drip tip and 510 connection), the Bee Flow Tank by Nubee features a compact design.

With a base diameter of 26mm and a standard 510-type connection, it is compatible with the vast majority of mods on the market.

As for the Pyrex bulb, it brings the diameter up to 29mm.

A very useful replacement straight Pyrex bulb is also included in the box, in case you break the pre-installed tank.

Nubee's Bee Flow clearomizer

The Bee Flow coils

Along with your tank, you’ll also receive two Bee Flow coils, allowing you to find the right value for your vaping style:

• 1 Bee Flow 0.16ohm pre-installed coil (65-70W): designed for an airy draw with direct (DL) inhalation, it’s particularly suited for e-liquids with a VG content not exceeding 70%
• 1 Bee Flow 0.20ohm coil (55-60W): suitable for an open draw with direct (DL) or restrictive (RDL) vaping, with e-liquids where the VG content does not exceed 60%

How do I replace the coil in the Bee Flow Tank?

As soon as you notice signs of wear on your coil (a burnt taste, loss of flavor), it’s time to replace it.

To do so, simply:

1. Unscrew the base of the clearomizer
2. Remove the used coil
3. Soak the new coil with a few drops of e-liquid
4. Insert it into the designated compartment
5. Screw the base of the clearomizer back on
6. Fill the tank

Warning: We strongly recommend that you wait at least ten minutes before vaping, to allow the coil to properly saturate with e-liquid.

The top airflow of Bee Flow

For your convenience, the French brand Nubee has opted for an airflow located at the top (top airflow) of the clearomizer.

What are the benefits? By positioning the air intakes above the tank, the risk of e-liquid leaks is minimized.

To adjust your draw, simply turn the airflow ring to open or close the vents.

This allows you to switch between an airy draw with direct inhalation (DL) and a slightly less airy draw with restricted direct inhalation (RDL).

As a reminder, the wider the openings are, the greater the airflow, and thus the stronger the draw.

The top airflow of Nubee's Bee Flow clearomizer

How to fill your Bee Flow tank?

To fill the clearomizer, Nubee has opted for a top-fill system, meaning you fill it from the top using a sliding top cap.

To refill your 5ml tank with e-liquid, simply:

1. Push the top cap at the notch to slide it open
2. Insert the tip of your bottle into the filling port
3. Pour in your e-liquid
4. Close the top cap by sliding it back to its original position

Remember to wait 5 to 10 minutes before vaping if you’re using a new coil.

Filling system of Nubee's Bee Flow clearomizer

Box contents

• 1 5ml Bee Flow tank clearomizer
• 1 0.16ohm Bee Flow coil (pre-installed)
• 1 0.2ohm Bee Flow coil
• 1 straight spare Pyrex
• 1 set of spare pieces
• 1 user guide

The Bee Flow tank clearomizer is made in France by Nubee.

Box contents of Nubee's Bee Flow clearomizer