Eleaf iStick XC100 Mod

A maximum power of 100 watts and 2 functioning modes thanks to its Avatar 2.0 chipset: A&L presents Eleaf's iStick XC100 mod in this video

Are you looking for a performing and easy-to-use electronic mod? Eleaf offers its iStick XC100, a mod made for beginners and experts in the vaping world.

Powered by a 18650 or 21700 battery (sold separately), it delivers a maximum power of 100 watts and offers 2 functioning modes (Power or RTA) thanks to its Avatar 2.0 chipset.

Its deck with a 510 connection accepts the atomizers with a maximum diameter of 28mm, which includes a great number of clearomizers on the market.

Eleaf's iStick XC100 mod with Lost Vape's Centaurus Sub Ohm V2 clearomizer

A compact and ergonomic mod

The iStick XC100 mod of the brand Eleaf is made of aluminum alloy, which offers sturdiness and lightness.

With dimensions of 94.3x39.3x29.2mm, this mod is compact while guaranteeing comfortable handling.

Its 510 deck accepting up to 28mm in diameter gives access to a large choice of clearomizer and atomizers compatible.

On the main side, from top to bottom:

• A multifunction switch (Fire button and switch wheel)
• A TFT color screen of 1.05"
• A sliding locking switch with two positions
• A USB-C port (5V/2A)

Eleaf's iStick XC100 mod

A mod with the choice between 2 vape modes

How does your mod work? It's very simple. Once a battery is charged and installed in your mod, you only have to push 5 consecutive times on the Fire button to turn it on. To turn it off, repeat this operation.

Equipped with the Avatar 2.0 chipset, the iStick XC100 delivers a power adjustable from 5 to 100 watts.

Its TFT color screen, the Fire button (3 quick pushes on the latter), and the wheel enable you to choose between 2 vape modes:

1. The POWER mode: to manually adjust the power between 5 and 100W
2. The RTA mode: a mode meant for the tension setting for the rebuildable atomizers

As for the display, the screen indicated essential information: the power, the capacity left, the coil value, and the puff number.

You're not satisfied with the pre-installed theme? Eleaf offers to customize the display by choosing among 4 different visual themes.

The 1.05" TFT screen of Eleaf's iStick XC100 mod

The mod includes a locking button located on the main side, above the USB-C port, enabling you to lock the whole device, or only the setting wheel, to avoid any involuntary triggers during transport.

The locking switch of Eleaf's iStick XC100 mod

A power supply with a 18650 or 21700 battery

The iStick XC100 works with a 18650 or 21700 battery (sold separately). The compartment is accessible via a screwed trap door located below the mod.

To insert your battery, you only have to unscrew the trapdoor and put the battery while respecting the polarity indications, then close it.

The manufacturer has thought of everything: if you use an 18650 battery, an adapter included is provided to ensure a good fit.

The battery compartment of Eleaf's iStick XC100 mod

You don't have any recharged batteries? Don't worry, the iStick XC100 mod is equipped with a USB-C port located on the main side. The latter enables a quick recharge on the mod, thanks to the USB-C cable included.

To do this, you only have to connect the USB-C cable to your device, then connect it to a compatible power supply (for example: a wall outlet, a computer, or an external battery).

Please note: we highly recommend using an external charger (not included) to preserve the lifespan of batteries.

The USB-C port of Eleaf's iStick XC100 mod

Box contents

• 1 iStick XC100 mod
• 1 USB-C cable
• 1 user guide

The iStick XC100 mod is made by Eleaf. It is sold without batteries.

Box contents of Eleaf's iStick XC100 mod