Lost Vape Thelema Elite DM45 Podmod

Reference : 20720

45W, 1,500mAh, the 2A USB-C recharge, and two 3ml cartridges

  • Maximum power
    45w
  • Volume
    3ml
  • Battery type
    Built-in battery
  • Brand

Lost Vape completes the Thelema collection with the Thelema Elite DM45 podmod, a rechargeable podmod with a maximum power of 45W, equipped with a 1,500mAh built-in battery and a 3ml tank.

It works with the E-Plus cartridges with a sealed mesh coil. The manufacturer announces the use of the E-Core Tech 3.0 technology with dual mesh on the E-Plus Dual Mesh cartridges included with the podmod.

Delivered with a 0.3ohm and 0.6ohm cartridge, it enables you to alternate between a tight draw in MTL and a slightly airier draw in RDL.

Lost Vape's Thelema Elite DM45 podmod

Lost Vape's Thelema Elite DM45 podmod

The design of Thelema Elite DM45

The body of the Thelema Elite DM45 podmod is made of zinc alloy.

Its dimensions of 103 x 36 x 18 mm allow it to slide into a pocket or a handbag.

The podmod is equipped with an OLED screen that displays the coil value, the battery level, the power, and the selected mode. It also has an airflow range and a USB-C port for recharging.

The Thelema Elite DM45 can be activated in two ways: the Fire button or directly from inhaling (auto-draw).

Handling of Lost Vape's Thelema Elite DM45 podmod

Handling of Lost Vape's Thelema Elite DM45 podmod

A magnetic connection for E-Plus cartridges

Like numerous podmods, the cartridge of the Thelema Elite DM45 is fixed on the battery with a magnetic connection.

This podmod is compatible with the E-Plus cartridges by Lost Vape, whether it is in simple or dual mesh.

The magnetic connection between Lost Vape's cartridge and the Thelema Elite DM45 podmod

The magnetic connection between Lost Vape's cartridge and the Thelema Elite DM45 podmod

The podmod's functioning

Your Thelema Elite DM45 podmod has two power modes.

The Single mode is suited to the 0.6ohm cartridge and gets 25W of power. The second Dual mode is meant for the 0.3ohm cartridge and enables you to benefit from 45W power for a more important and airy draw.

If you wish to go from one mode to another, press the Fire button twice.

To vape, you have the choice between:

  • In automatic: equipped with an autodraw system, you only have to draw from the mouthpiece to vape it
  • In manual: press the Fire button by drawing from the mouthpiece to get a puff

Its 1,500mAh built-in battery supplies the podmod, no matter the power chosen.

The OLED screen of Lost Vape's Thelema Elite DM45 podmod

The OLED screen of Lost Vape's Thelema Elite DM45 podmod

The podmod's recharge

The Thelema Elite DM45 is recharged via its USB-C port, compatible with a 5V/2A charger. The USB-C cable is included in the box, but not the wall charger.

To preserve the battery, it's better to recharge the podmod on the port of a modem router or a computer for example.

The USB-C port of Lost Vape's Thelema Elite DM45 podmod

The USB-C port of Lost Vape's Thelema Elite DM45 podmod

The E-Plus cartridges of Thelema Elite DM45

The podmod is delivered with two E-Plus Dual Mesh cartridges, in 0.3ohm and 0.6ohm.

Once the coil is used, you only need to throw it out in a garbage bin and to change the whole cartridge.

With your kit, you'll receive :

  • A cartridge with 0.3ohm sealed coil: to use at 45W for a semi-airy draw in RDL
  • A cartridge with 0.6ohm sealed coil: to use at 25W to get a tight draw in MTL

The E-Plus cartridge of Lost Vape's Thelema Elite DM45 podmod

The E-Plus cartridge of Lost Vape's Thelema Elite DM45 podmod

The airflow of Thelema Elite DM45

The podmod has an airflow slider, enabling you to set the airflow continuously.

By pushing this slider, you'll change the draw type from a tight draw to a slightly airier draw.

The airflow of Lost Vape's Thelema Elite DM45 podmod

The airflow of Lost Vape's Thelema Elite DM45 podmod

How to fill the cartridge of the Thelema Elite DM45 podmod?

The filling of E-Plus cartridges are made in a few steps. To fill the 3ml of your cartridge, follow the guide below:

  1. Take the cartridge off the podmod
  2. Softly pull the silicone strip
  3. Put the bottle tip into the filling hole
  4. Fill the cartridge with e-liquid
  5. Close the strip carefully
  6. Reconnect the cartridge to the podmod

Warning: wait a few minutes before vaping so the coil is correctly primed with e-liquid.

Filling the cartridge on Lost Vape's Thelema Elite DM45 podmod

Filling the cartridge on Lost Vape's Thelema Elite DM45 podmod

Box contents

  • 1 1,500mAh Thelema Elite DM45 podmod by Lost Vape
  • 1 3ml E-Plus Dual Mesh cartridge in 0.3ohm
  • 1 3ml E-Plus Dual Mesh cartridge in 0.6ohm
  • 1 USB-C cable
  • 1 neck lanyard
  • 1 spare O-ring
  • 1 user guide

The Thelema Elite DM45 podmod is made by the brand Lost Vape.

Box contents of Lost Vape's Thelema Elite DM45 podmod

Box contents of Lost Vape's Thelema Elite DM45 podmod

Characteristics
Maximum power 45w
Volume 3ml
Battery type Built-in battery
Height 103mm
Width 36mm
Depth 18mm
Battery capacity 1500mAh
USB charging Yes
Fill type From the side
Drip-tip Proprietary
Connector pin Proprietary
Configuration Variable Wattage
Expertise level Intermediate
Inhaling type Versatile
Battery Built-in

OUR CUSTOMERS' QUESTIONS ABOUT THE PRODUCT

No questions for the moment
Your question has been successfully sent to our team. Thank you!
Captcha
Related products
The three Lost Vape's E-Plus cartridges in 0.3ohm

Lost Vape E-Plus Cartridge (x3)

3 spare cartridges for Thelema Elite 40 and Centaurus E40 podmod
USB 2A Wall Charger by A&L in Black

A&L USB 2A Wall Charger

A 2A wall charger for a quick recharge of your device
A&L's Ultimate MAX Raiden 50ml e-liquid

A&L Raiden MAX 50ml

A Philippine mango in a fresh mix by A&L
2026-10-26

Specific References

ean13
6941881828205
New product
13,90€
Colours :
Available